Die Casting Mould Dealers in Kathwada, Ahmedabad

• Type: Junction Box
• Material: FRP
• Shape: Rectangular, Square
• Certification: ISI Certified
• Color: Grey, White
• Pattern: Plain
• Condition: New
• Finishing: Coated
• IP Rating: 25-50IP

• Material: Iron

• Material: Steel
• Warranty: 1 Year
• Feature: High strength
• Shape: Square
• Usage: Industrial
• Speciality: Optimum strength

Place orders with us, timely deliveries of the same are our prime responsibility! We have captured the market with the wide array of products; we make available the same from Ahmedabad(India). Our sturdy cube moulds are available in various dimension like 100mm, 150mm, 200mm etc.

Moulding Box, Pallet Car, Match Plate, Match Plate Pins, Closing Pins, Round and Oval Bush as per your requirement

• Material: Stainless Steel
• Application: Ice Storage
• Color: Grey
• Shaping Mode: Rectangular, Square
• Features: Durable finish standardsExcellent strengthSturdy design.
• Price Range: Rs. 550-600 per kg

Na

• Material: PVC
• Mould Life: 350000-400000 Shots
• Temperature: -20 to +60 Deg C
• Hardness: 20-40 HRC
• Automation Grade: Automatic
• Tensile Strength: 100-300 Mpa
•  :  

Varying Sizes of Cubes Available :Most common Size are 75 mm & 150 mm Material: Cast Iron & M.S. FabricatedInternal faces are machined flat to +0.02 mm.All moulds conform to their respective Indian standards.

• Type: Die Casting Mould
• Material: ABS, Plastic, PP, PVC
• Color: Grey, Silver
• Condition: New, Used
• Application: Cover Block Moulding, Industrial
• Warranty: 1 Year, 2 Years
• Features: Sturdiness, High Strength, Anti-Corrosive, Durable

We are the main supplier of this product.

Introduction Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements.   General Description and specifications Complete with base plate. The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.   The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.   SIZES AVAILABLE : 50MM/ 100MM/ 150MM   Optional Accessory As per IS : 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 +/- 0.2 kg. Material for construction of these moulds is mild steel.   CUBE MOULD 7.06 CMS(FOR CEMENT MORTAR) SPANNER FOR DEMOULDING AND MOULDING,TAMPING ROD WITH SAUQRE FACE.   BEAM MOULDS For casting concrete specimens for flexural tests. The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Stee

• WORLD CLASS: ISI STANDARD
• Brand Name: NEELKAMAL

MS Fabricated Moulding Box: Accurate  Durable High Strength Light Weight  Interchangeable rigidly designed for ARPA 300, ARPA 450, ARPA 900 and ARPA 1300 and similar jolt squeeze moulding machines. Accurately fabricated using fixtures, machined true on mating surfaces using VTL, jig drilled using Jig boring machine with DRO and fitted with hardened and grinded round and elongated bushes. Sturdy construction with flange type with double lugs, 4 dovetail bars for C clamp, 4 pipe handles for manual lifting and 2 trunion for lifting by crane. Gas escape holes for faster cooling. The moulding boxes are confirms to ISI or International standard. PALLET CAR: The Pallet Car suitable for moulding box of ARPA 300, ARPA 450, ARPA 900 and ARPA 1300 are made of Graded CI MS fabricated, machined accurately, fitted with preciously machined wheel and shaft of alloy steel.

• Material: Mild steel
• Features: Fine finish,High strength,Sturdy design

Moulding Box, Spectacle Case, eyeglass case, Sunglasses Case

Investment Casting Mould, Blow Mould, Plastic Mould

sg iron casting machine moulding, graded ci, pump parts, Coil, Turbines

Cube Mould, Bar Bending Machine, Tower Hoist, mini cranes

Cube Moulds, half gear half rigid couplings, Spacer Couplings, Muff Coupling

Cast Aluminum Rotational Molds, U.V. Masterbatches For Rotational Molding

investment cast mold, aluminum gravity dies, bakelite mold

Die Casting Mould, Plastic Die Casting Moulds, aluminium die casting mold

Cast Iron Ingot Molds, Ingots Mould, Aluminum Milk Cans

Pressor cast mould, plastics mould, Blow Mould, Plastics moulded parts

Investment Casting Mould, Auto Parts Mould, Multi Cavity Cap Mould

Progressive Die Mould