Digital Compression Testing Machine Dealers in Ahmedabad

• Brand Name: EIE

We are offering Compliance with following Intaernational Standards IS : 14858 - 2000 Introduction The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading. The Complete unit comprises a Loading Unit which is of four pillar model construction, having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 1500 KN, Cubes up to 200 mm & Cylinders up to 150 mm Diameter x 300 mm Height can be tested using the appropriate spacers. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approximately 15 minutes, unless cancelled, using the panel mounted reset switch. Salient Features of EIE - Digital CTM Machine · 4 line Alphanumeric display with backlit, displaying - Actual Load, Peak load, Rate of loading and Calculated load in Nmm² · Direct reading of compressive strength in Nmm2 - No calculation required · Peak hold facility · Can manually control pace rate from 1 KNSec to 9 KNsec

• Loading Range: 2000KN
• Platen Size: 220 mm sq.

The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading. Features High stability four column load frame Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included. A precise large diameter spherical upper platen for optimum results Variety of optional accessories for cubes, blocks, bricks and flexure test available Motorized hydraulic power pack or pumping unit with rapid approach and automatic overload protection Comes standard with safety Guards on all four sides. The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers. Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually. Optional Fittings Digital Load indicator with RS 232 interface for connection to windows XP based computer system Digital Load indicator with printer interface Batteryback up for Digital Load indicator – in case of power failure Additional Pressure Gauge as `stand by` load indicator for emergency use in case of power failure Spare Oil seal Flexural test attachment (to be ordered at the time of purchase of machine.) Can be accommodated later on, only if request received at the time of placement of order Brick test attachment Block testing attachment Spacers to accommodate small size cubes and cylinders Hydraulic Oil Ram extracting tool

• Type of Pumping: Electrical
• Loading Range: 2000KN
• Least Count: 1 KN
• Max. Clearance Between Platen: 370mm
• Max. Clearance Between Side Platen: 340mm
• Platen Size: 220 mm sq.
• Piston Stroke: 215.00 mm

The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading. Features High stability four column load frame Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included. A precise large diameter spherical upper platen for optimum results Variety of optional accessories for cubes, blocks, bricks and flexure test available Motorized hydraulic power pack or pumping unit with rapid approach and automatic overload protection Comes standard with safety Guards on all four sides. The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers. Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually. Model With digital Readout and pace rate Controller Optional Fittings Digital Load indicator with RS 232 interface for connection to windows XP based computer system Digital Load indicator with printer interface Batteryback up for Digital Load indicator – in case of power failure Additional Pressure Gauge as `stand by` load indicator for emergency use in case of power failure Spare Oil seal Flexural test attachment (to be ordered at the time of purchase of machine.) Can be accommodated later on, only if request received at the time of placement of order Brick test attachment Block testing attachment Spacers to accommodate small size cubes and cylinders Hydraulic Oil Ram extracting tool

• Measuring range up to: 0-2000kN.
• Max. Vertical clearance between platens: 320 mm.
• Platens dimension: 320 x 320 mm.
• Net weight: About 1000 Kg.
• Max. Capacity: 2000 Kn,
• Machine operates on Single Phase A.C.: 240 volts supply.

With the endorsement of our professionals of manufacturing unit, we are engaged in offering a wide gamut of Compression Cube Testing Machine. This testing machine is appreciated among patrons for its digital models with pace rate indicators. Offered testing machine is developed from the modern technology in accordance with set industry standards. We provide this testing machine on several specifications models as per the precise demand of customers.Features: Reliable functioning Self-aligning platen assembly Highly stable   K.J.E. Make Compression Testing Machine:   KJE series compression testing machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non- technical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimensions, sturdy and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult. KJE compression Testing Machines conform to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1). Silent and smooth Hydraulic power pack with double plunger , pace rate controller lever will regulate the pace rate as desired manually. These machines are available in 50kN, to 3000kN Capacity.

• Type of Pumping: Electrical
• LoadingRange: 2000KN
• Least Count: 1 KN
• Max. Clearance Between Platen: 370mm
• Max. Clearance Between Side Platen: 340mm
• Platen Size: 220 mm sq.
• Piston Stroke: 215.00 mm

    Introduction The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.   Features High stability four column load frame Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included. A precise large diameter spherical upper platen for optimum results Variety of optional accessories for cubes, blocks, bricks and flexure test available Motorized hydraulic power pack or pumping unit with rapid approach and automatic overload protection Comes standard with safety Guards on all four sides.     The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.     Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.     Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually. Optional Fittings Digital Load indicator with RS 232 interface for connection to windows XP based computer system Digital Load indicator with printer interface Batteryback up for Digital Load indicator – in case of power failure Additional Pressure Gauge as `stand by` load indicator for emergency use in case of power failure Spare Oil seal Flexural test attachment (to be ordered at the time of purchase of machine.) Can be accommodated later on, only if request received at the time of placement of order Brick test attachment Block testing attachment Spacers to accommodate small size cubes and cylinders Hydraulic Oil Ram extracting tool