Disc Check Valve Dealers in Odhav, Ahmedabad

• Brand Name: Allines
• Feature: Flanged Ends to ANSI B 16.5 / B 16.47,Meet Inspection requirements as per API 598 / API 6D
• Place of Origin: Ahmedabad  
• Size Range: 4”NB to 20”NB
• Applications: Suitable for all types of water, air and steam 121'C or 250'F
• Condition: New, Good
• Packaging: Bulk

Sand Casting Tilting Disc Check Valves are used to prevent reversal of flow in horizontal or vertical pipe lines. These Sand Casting Tilting Disc Check Valves can be used for upward flow only. The Sand Casting Tilting Disc Check Valves, offered by us, are similar to Swing Check valves. In most installations of Sand Casting Tilting Disc Check Valve, slamming is minimized upon reversal flow. So, noise and vibrations are reduced. We are a prominent Sand Casting Tilting Disc Check Valve Manufacturer, Exporter and Supplier from India. Salient Features : Til Ting Disc Check Valves consists of a cylindrical housing, with a pivoted circular disc The pivots are located just above the center of the disc and offset from the plane of the body seat This design gives a bell – crank action to the disc. The seat is circular bevel type and the disc drops in out of contact without rubbing or sliding Short distance of travel, combined with a balanced disc allows rapid closure while minimizing slamming Pivot pins are constructed of a Stainless Steel Drop tight seating is accomplished over the full pressure range because a slight clearance at the pivot pin assures complete seating between the disc ring and body ring The full flow area with lower head loss ensure with the highest efficiency and durability Meet design requirements as per API 6D / API 594 / BS-EN 12334 / API B 16.34 Meet Inspection requirements as per API 598 / API 6D Face to Face dimensions as per API 6D / API 594 / ANSI B 16.10 Flanged Ends to ANSI B 16.5 / B 16.47 Size Range : 4”NB to 20”NB Options : Single Switch / Hydraulic Cylinder (top, bottom and side mounted) design available on request By – Pass arrangement available on request Applications : Suitable for all types of water, air and steam 121'C or 250'F (For higher temperature, consult factory)

Size:2"-36" Class:150#-1500# Material:Carbon steel;Stainless steel;Duplex steel;Bronze;Inconel Medium:Oil;Gas;Water Design&Manufacture to API6D&BS1868 Face to face to ANSI B16.10 Ends to ANSI B16.5 Test&Inspection to API598

Check valves are self-contained and self-actuating valves that act automatically to prevent flow reversal. REX DCV-Series Disc Check Valves are an excellent alternative to conventional check valves for several reasons. Its design is inherently lighter and more compact, making it less expensive to install and to ship. All valves are seat tested before thery are shipped from the factory. It provides a maintenance free effective solution for preventing reverse flow of condensate discharged from traps. Fit easily between two pipe flanges, can be installed in any direction, with good, tight shut-off. Recommended for all trap installations draining into flooded return lines to prevent return flow especially during a shutdown. REX offers a full line of check valves that are used in a wide range of application for industries such as Oil & Gas, Pulp & Paper, Chemical, Petrochemical, Refining, Mining, Power, Heating, Air Conditioning, Cooling, Timber, Iron & Steel, Textile & many more industries. THE BENEFITS Wide range of uses across a variety of fluids such as, liquids gases & vapours. The unique cam design of the body, enables it to fit between a wide varieties of flanges. The disc is spring assisted. This design is much more efficient in reducing pressure drop, drastically reduces water hammer. Simple & compact design, choice of metal-to-metal or soft seals, use of approved stainless steel materials and quality manufacture, makes it versatile.

Simex offers the wide array of disc check valves which are having compact wafer design and low cost that made it a popular choice when space and price are major factors in valve selection. Our disc check valves are recommended after traps discharging into closed systems to guarantee against return or spill back. Dcvs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, not just steam. Main advantage of these check valves is they can be mounted between pipe flanges in any direction. Disc check valve which is having the movable disc that block the flow or allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although the disc check valves are available in various sizes in order to meet the requirements of different applications. The valve allows full, unobstructed flow and automatically closes as pressure decreases. These valves are fully closed when flow reaches zero, in order to prevent backflow.

Disc check valve It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

We are offering disc check valve. Technical specifications : design : disc type – non slam single plate check valveseat material : metal seatedbody material : cf8 (ss 304), cf8m (ss 316)end connection : fitted between two flanges.pressure rating class : asa 150, 300, 400, pn 10, pn 16 & pn 40size range : 15mm to 150mm.

• End Connection: FITTED BETWEEN TWO FLANGES.
• BODY MATERIAL: CF8 (SS 304), CF8M (SS 316)
• DESIGN: DISC TYPE - NON SLAM SINGLE PLATE CHECK VALVE
• SEAT MATERIAL: METAL SEATED
• PRESSURE RATING CLASS: ASA 150, 300, 400, PN 10, PN 16 & PN 40
• SIZE RANGE: 15mm to 300mm

The Check Valves have two openings in the body, one for fluid to enter and the other for fluid to leave. These Check Valves are used for diverse purposes. Moreover, we offer the Check Valves in different types and sizes. Features - Two openings- High performance- Superior quality- Made from high grade material 

Non Slam Disc Check Valve

• Pressure Rating: ASME - 150#, 300#, 600#, 900#, 1500#, & 2500#
• End Connection: Sandwich
• Size Range: 15 NB through 150 NB
• Type: Single Disc
• Operation: Automatic with Return Pressure
• Port Opening: Full
• Seat: Soft - Rubber/ PTFE/ Metal to Metal
• Disc: Solid Disc Spring Loaded
• Gasket & Packing: N.A
• MOC: Refer Material Chart
• Design Code: DIN - 3230
• Testing: API - 598
• Inspection: 3rd Party/ Client/ Manufacturer

FFV Disc Check Valve make in Investment Casting SS 304,SS 316 With Spring Loaded,Soft Seated Teflon.   Features Disc Check Valve(Non Slam Check Valve)Open And Closed Quickly Against the Opposite Flow Acting On Disc & Provide The Full Flow In Line It Occupy very less space and provide full flow. Light weight and easy installation Spring will prevent the reverse flow in pipe lines Zero leakage with soft seated Testing Standard: API 598

Nivz Spring Loaded Disc Check Valves - Non Return Valve feature a wafer type, compact and rugged design Cast Carbon Steel (ASTM A 216 GR. WCB) or Stainless Steel (ASTM A 351 GR. CF8/CF8M/CF3/CF3M/SS304/SS316/SS304L/SS316L) construction and are suitable for any process liquid, air, gas, steam etc. The Single Disc Check Valve (Wafer Type Single Disc Check Valve) consists of four main components: the body, a disc, a star guide and a spring. The Disc check valves are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow. The design of Wafer Design, Sandwich Type, Flangeless Single Disc Spring Loaded Check Valves allows them to be installed between any flanges of different standard and in any position; including vertical pipelines where the fluid flows downwards. Wafer Type Spring Loaded Disc Check Valves is also available with Zero Leakage by the use of Soft Seat. Nivz Valves & Automation has cover Disk Check Valve up to 6” (DN150) Size and Pressure Rating up to PN40. Nivz Valves a leading Spring Loaded Disc Check Valve Manufacturer, Disc Check Valve Exporter, Stockist, Importer, Supplier. Flangeless - Wafer - Sandwich Type Disco Check Valves, Non Return Valve -    Salient Features of Disc Check Valve Investment Casting Body Construction Compact & Rugged Design Stronger, Lighter and Smaller than Conventional Swing Check Valve, Hence Less Expensive to Install and Maintain Single Disc Type Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines Easy To Installation between Two Pipe Flanges Metal To Metal or Soft Seat option Maintenance Free Design Zero Leakage (In Soft Seat) Full Port Opening Less Pressure Drop Wafer, Flangeless, Sandwich Type Shorter Length, Required minimum space Offer any 3rd Party or Client Inspection

• Minimum Order Quantity: As per Customer Needs

Disc Check Valve Non Slame, Double Gland Pulp Valve, GLOBE VALVE, FLANGED END

Single Disc Spring Loaded Check Valves

disc type check valve, fabricated basket strainers, Double Window Sight Glass

Disc Check Valves, Globe Valves, Industrial Valves, Non Return Valves