Disc Check Valve Dealers in Ahmedabad

• Weight: 5Kg, 10kg, 15kg, 20kg
• Packaging Type: Wooden Box, Carton, Pallets
• Diameter (mm): 50mm, 60mm
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Specialities: Investment Casting, Heat Resistance, Durable, Casting Approved
• Diametre (milimetre): 100 To 1000 Mm
• Certification: ISO 9001:2008 Certified
• Country of Origin: India

Holding years of expertise in the industry, we, as a Manufacturer and Supplier, offer Disc Check Valves. We manufacture the best quality thanks to our skilled professionals, sophisticated technology and latest machines. They are suitable for different purposes in various industries. The raw material used in manufacturing process is procured from reliable vendors. The supreme quality makes them popular among customers. Get in touch to avail pocket friendly rates.   Details : Additional Description: Listed in category of topmost organization, we are offering Disk Check Valves to our clients. These are available in accurate dimensions and are protected completely using coating of abrasion resistant material. These are mainly used in oil, gases, and energy and chemical industries and are available in bulk with us. These Disk Check Valves are in full compliance with industry related norms and specifications. Size: - 15mm To 200mm Applications: General Service, Chemical, Petrochemical, Oil and Gas, Refinery, Energy,Pharmaceutical, Food & Beverage and Cosmetics Services, Water, Gas, Steam, Chemicals, Solvents, Thermal Fluids

• Brand Name: Allines
• Feature: Flanged Ends to ANSI B 16.5 / B 16.47,Meet Inspection requirements as per API 598 / API 6D
• Place of Origin: Ahmedabad  
• Size Range: 4”NB to 20”NB
• Applications: Suitable for all types of water, air and steam 121'C or 250'F
• Condition: New, Good
• Packaging: Bulk

Sand Casting Tilting Disc Check Valves are used to prevent reversal of flow in horizontal or vertical pipe lines. These Sand Casting Tilting Disc Check Valves can be used for upward flow only. The Sand Casting Tilting Disc Check Valves, offered by us, are similar to Swing Check valves. In most installations of Sand Casting Tilting Disc Check Valve, slamming is minimized upon reversal flow. So, noise and vibrations are reduced. We are a prominent Sand Casting Tilting Disc Check Valve Manufacturer, Exporter and Supplier from India. Salient Features : Til Ting Disc Check Valves consists of a cylindrical housing, with a pivoted circular disc The pivots are located just above the center of the disc and offset from the plane of the body seat This design gives a bell – crank action to the disc. The seat is circular bevel type and the disc drops in out of contact without rubbing or sliding Short distance of travel, combined with a balanced disc allows rapid closure while minimizing slamming Pivot pins are constructed of a Stainless Steel Drop tight seating is accomplished over the full pressure range because a slight clearance at the pivot pin assures complete seating between the disc ring and body ring The full flow area with lower head loss ensure with the highest efficiency and durability Meet design requirements as per API 6D / API 594 / BS-EN 12334 / API B 16.34 Meet Inspection requirements as per API 598 / API 6D Face to Face dimensions as per API 6D / API 594 / ANSI B 16.10 Flanged Ends to ANSI B 16.5 / B 16.47 Size Range : 4”NB to 20”NB Options : Single Switch / Hydraulic Cylinder (top, bottom and side mounted) design available on request By – Pass arrangement available on request Applications : Suitable for all types of water, air and steam 121'C or 250'F (For higher temperature, consult factory)

Simex offers the wide array of disc check valves which are having compact wafer design and low cost that made it a popular choice when space and price are major factors in valve selection. Our disc check valves are recommended after traps discharging into closed systems to guarantee against return or spill back. Dcvs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, not just steam. Main advantage of these check valves is they can be mounted between pipe flanges in any direction. Disc check valve which is having the movable disc that block the flow or allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although the disc check valves are available in various sizes in order to meet the requirements of different applications. The valve allows full, unobstructed flow and automatically closes as pressure decreases. These valves are fully closed when flow reaches zero, in order to prevent backflow.

Raw material that is sourced from the reliable places is used as input in the production procedure. In order to make high quality range of products, we check it for quality prior to sourcing. The entire range, we offer, is manufactured under the strict guidance of the quality experts ensuring zero defect's at buyer's end.

• Material: Carbon Steeel, Metal, Stainless Steel
• Application: Water Fitting
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Durable
• Size: 1/2inch, 1/4inch, 1inch
• Power: Manual

Laxmi valve manufacturer is provide best quility product and service of manufacturering disc check, ball valve, spring loaded,fountain nozzle ahmedabad, gujarat,india please contact for price detail....

Model DNRV, Body CF8 CF8M, Size Range 12" to 4" Screwed End, 12" to 12" Wafer Type, 1.14" to 2" Lug type, Disc. S.S. 304 316, Seat Metal to Metal (PTFE EPDM On Request), Temprature Max. 300 °C, Pressure rating PN20 , PN40, End Connection Screwed End Wafer type Lug type.

FFV Disc Check Valve make in Investment Casting SS 304,SS 316 With Spring Loaded,Soft Seated Teflon.   Features Disc Check Valve(Non Slam Check Valve)Open And Closed Quickly Against the Opposite Flow Acting On Disc & Provide The Full Flow In Line It Occupy very less space and provide full flow. Light weight and easy installation Spring will prevent the reverse flow in pipe lines Zero leakage with soft seated Testing Standard: API 598

• Brand Name: MASQ
• Size: 15 Mm To 200 Mm
• Material Grade: SS 304
• Temperature: Up to 180 Degree C
• Testing Standard: API 598

• Model :: ADCV
• Size :: ½", to 4"
• Body :: CF8/ CF8M
• Disc Seat :: Metal To Metal
• Spring :: S.S. 304 / S.S 316
• Disk :: S.S. 304 / S.S 316
• Max. Press :: Upto 42 Bar
• Max.Temp :: 300°C

• Size Range: 15MM to 100MM

Flosteer Disc Check Valves feature a wafer type, compact and rugged cast steel design and are suitable for any process liquid, air, gas, steam etc. Disc check valves are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow. Advantage of these check valve is they can be mount between pipe flanges in any direction. Body Seat available in Metal-to-Metal and Soft seat also.

We are one of prominent Disc Check Valves Manufacturers and Suppliers from Ahmedabad, Gujarat. Our Disc Check Valve can be easily mounted in any plane or direction. This Disc Check Valve is optimized to operate under extremely low opening pressures. These spring loaded disc check valves are tested as per API 598 standard. We can provide disc check valve in DN 15~100 sizes. This check valve is primarily installed between two pipe flanges using standard gasket on either side.

• Pressure Rating: ASME - 150#, 300#, 600#, 900#, 1500#, & 2500#
• End Connection: Sandwich
• Size Range: 15 NB through 150 NB
• Type: Single Disc
• Operation: Automatic with Return Pressure
• Port Opening: Full
• Seat: Soft - Rubber/ PTFE/ Metal to Metal
• Disc: Solid Disc Spring Loaded
• Gasket & Packing: N.A
• MOC: Refer Material Chart
• Design Code: DIN - 3230
• Testing: API - 598
• Inspection: 3rd Party/ Client/ Manufacturer

Check valves are self-contained and self-actuating valves that act automatically to prevent flow reversal. REX DCV-Series Disc Check Valves are an excellent alternative to conventional check valves for several reasons. Its design is inherently lighter and more compact, making it less expensive to install and to ship. All valves are seat tested before thery are shipped from the factory. It provides a maintenance free effective solution for preventing reverse flow of condensate discharged from traps. Fit easily between two pipe flanges, can be installed in any direction, with good, tight shut-off. Recommended for all trap installations draining into flooded return lines to prevent return flow especially during a shutdown. REX offers a full line of check valves that are used in a wide range of application for industries such as Oil & Gas, Pulp & Paper, Chemical, Petrochemical, Refining, Mining, Power, Heating, Air Conditioning, Cooling, Timber, Iron & Steel, Textile & many more industries. THE BENEFITS Wide range of uses across a variety of fluids such as, liquids gases & vapours. The unique cam design of the body, enables it to fit between a wide varieties of flanges. The disc is spring assisted. This design is much more efficient in reducing pressure drop, drastically reduces water hammer. Simple & compact design, choice of metal-to-metal or soft seals, use of approved stainless steel materials and quality manufacture, makes it versatile.

Disc check valve It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

• Material: Stainless Steel
• Pressure Rating: PN20,PN40
• Country of Origin: Made in India
• Pressure: High Pressure
• End Connection: Flange
• Brand: Aira
• Disc: S.S. 304 / 316
• I Deal In: New Only
• Seat: Metal to Metal (PTFE / EPDM On Request)
• Temperature: Max. 300 Degree C
• Model Name/Number: DNRV
• Body: CF8 / CF8M
• Size Range: 1/2 to 4 inch Screwed End,1/2 to 12 inch Wafer Type,1.1/4 to 2 inch Lug type
• Size: 1/2 Inch to 12 inch

Nivz Spring Loaded Disc Check Valves - Non Return Valve feature a wafer type, compact and rugged design Cast Carbon Steel (ASTM A 216 GR. WCB) or Stainless Steel (ASTM A 351 GR. CF8/CF8M/CF3/CF3M/SS304/SS316/SS304L/SS316L) construction and are suitable for any process liquid, air, gas, steam etc. The Single Disc Check Valve (Wafer Type Single Disc Check Valve) consists of four main components: the body, a disc, a star guide and a spring. The Disc check valves are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow. The design of Wafer Design, Sandwich Type, Flangeless Single Disc Spring Loaded Check Valves allows them to be installed between any flanges of different standard and in any position; including vertical pipelines where the fluid flows downwards. Wafer Type Spring Loaded Disc Check Valves is also available with Zero Leakage by the use of Soft Seat. Nivz Valves & Automation has cover Disk Check Valve up to 6” (DN150) Size and Pressure Rating up to PN40. Nivz Valves a leading Spring Loaded Disc Check Valve Manufacturer, Disc Check Valve Exporter, Stockist, Importer, Supplier. Flangeless - Wafer - Sandwich Type Disco Check Valves, Non Return Valve -    Salient Features of Disc Check Valve Investment Casting Body Construction Compact & Rugged Design Stronger, Lighter and Smaller than Conventional Swing Check Valve, Hence Less Expensive to Install and Maintain Single Disc Type Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines Easy To Installation between Two Pipe Flanges Metal To Metal or Soft Seat option Maintenance Free Design Zero Leakage (In Soft Seat) Full Port Opening Less Pressure Drop Wafer, Flangeless, Sandwich Type Shorter Length, Required minimum space Offer any 3rd Party or Client Inspection

We are offering disc check valve. Technical specifications : design : disc type – non slam single plate check valveseat material : metal seatedbody material : cf8 (ss 304), cf8m (ss 316)end connection : fitted between two flanges.pressure rating class : asa 150, 300, 400, pn 10, pn 16 & pn 40size range : 15mm to 150mm.

Size:2"-36" Class:150#-1500# Material:Carbon steel;Stainless steel;Duplex steel;Bronze;Inconel Medium:Oil;Gas;Water Design&Manufacture to API6D&BS1868 Face to face to ANSI B16.10 Ends to ANSI B16.5 Test&Inspection to API598

• End Connection: FITTED BETWEEN TWO FLANGES.
• BODY MATERIAL: CF8 (SS 304), CF8M (SS 316)
• DESIGN: DISC TYPE - NON SLAM SINGLE PLATE CHECK VALVE
• SEAT MATERIAL: METAL SEATED
• PRESSURE RATING CLASS: ASA 150, 300, 400, PN 10, PN 16 & PN 40
• SIZE RANGE: 15mm to 300mm

The Check Valves have two openings in the body, one for fluid to enter and the other for fluid to leave. These Check Valves are used for diverse purposes. Moreover, we offer the Check Valves in different types and sizes. Features - Two openings- High performance- Superior quality- Made from high grade material 

• Single Disc Type: Cast Stainless Steel (ASTM A 351 GR. CF 8/ CF 8M) Any other alloy as per Buyer’s Specifications
• S.S. 304 / 316 / 304L / 316L: Flangeless, Wafer type, Sandwich type
• Mfg. Standard: 15 MM to 150 MM

Product Features: Compact and Robust Design Stronger, Lighter and Smaller than Conventional Swing Check Valve Single Disc type Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines Easy To Installation between Two Pipe Flanges Maintenance Free Metal To Metal or Soft Seat option Full Port Opening Less Expensive to install

• Design:: API 6D/ API 594
• Pressure Temperature Rating:: ASME B 16.34
• Face to Face, End to End:: API 6D
• End Connection Dimension:: Wafer to suit PN 20 (ASME 150 Class),PN 50 (ASME 300 Class), PN 100 (ASME 600 Class)
• Inspection and Testing:: ISO 5208/ API 598
• Body: GG 25/ GGG 40/ A 126 WCB/ A 351 CF 8/ CF 8M
• Claper / Disc: GG 25/ GGG 40/ A 126 WCB/ A 351 CF 8/ CF 8M
• Body Seal/O Ring: Nitrite/ EPDM
• Clapper/ DIsc Seal: AISI 304/ AISI 316
• Pin: AISI 304/ AISI 316

single disc check valves, Diaphragm Valves, Knife Gate Valves, Pulp Valves

• Minimum Order Quantity: As per Customer Needs