Disc Polishing Machine Dealers in Ahmedabad

Metallography specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the  metallography structure of specimen under microscope.Specifications:  Two 8" bronze discs over which polishing paper or cloth can be stretched Variable speed from 100-1200 RPM Single Phase High torque  Motor Drive for smooth speed change Corrosion Resistant wash bowl free flow drain Flexible water jet with control valve The operation of the machine with 220 V AC Lapping Wheel Dia 200 MM

• Size: 150 x 22 x 53 mm
• Weight: 130G
• Impact device: D
• Impact energy: 11 N
• Test tip: Tungsten Carbide Measuring
• Accuracy: Mean Uncertainty ± 0.8% (corresponding to ± 1HRC at HRC =58) Max. hardness of
• Sample: 980 hv
• Operating time: 8 hours continuous use / rechargeable Imapct
• Direction: Any Angle
• Temrature: 0 to 50′ deg C.
• Min.weight of sample: 5 Kg (less than 5 Kg to 0.1 Kg. coupled on solid support)
• Min thickness of sample: 5 mm (coupled : 3 mm)
• Min thickness of layers: 0.8 mm
• Min radius of curved surface: 30 mm ( with support rings : 11 mm)

• speed: 100-1200 RPM

Metallography specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallography structure of specimen under microscope. Two 8" bronze discs over which polishing paper or cloth can be stretched Single Phase High torque Motor

Double Disc Polishing Machine, Thermocouple Tips