0123456 POWER DISTRIBUTION BOARD
Get Price Quote
Our valued clients can high quality Power Distribution Board help our customers to save the cost attached with installation, equipment storage, handling and field testing. Furthermore, we design, wire, test and assemble these boards using various electrical equipment, which can be customized as per our valued clients' preferences. Moreover, our range of boards is highly effective power distribution systems and monitor & protect DC systems.
Automatic Changeover System
Get Price Quote
In order to have uninterrupted chlorine gas supply to chlorination system necessary manifolds.Motorised valves and control panel are provided. Chlorine tonner are connected to manifold in which pressure gauge and pressure switch are installed. Pressure gauge indicates the chlorine tonner pressure and pressure switch actuate the electrically operated ball valve. Pressure switch is set at 1.0 kg/cm² that means chlorine cylinder is getting empty.Filled tonner connected to manifold. All tonners valve are kept opened so that manifolds are under pressurized condition. Switch on the auto change over panel and keep the selector switch in auto mode now as soon as panel is energized electrically operated valve manifold –I will open first. Even though manifold –ll is pressurized ,manifold –ll side valve will not operate due to inter lock system.As plant is in operation, chlorine gas will be consumed and tonner pressure may be coming down.When pressure switch actuator and alarm will come and electrically operated ball valve on manifold –l will close and valve on manifold – ll will open simultaneously. This system will be in operation till chlorine gas pressure is above 1.0 kg/cm² at the manifold. During this period fresh filled cylinders may be connected to manifold and kept ready for operation. As explained earlier, chlorine pressure started going below 1.0 kg/cm², alarm will be there and manifold –l valve in opened thus the operation of auto change over system continues.Note :- Kindly note that when the manifold pressure is 1.0 kg/cm² the chlorine tonner is not fully empty there will be at least one or two kg of chlorine will be available. It is not advisable to send chlorine cylinders for refilling with so much of chlorine left over. This left over chlorine shall be exhausted by keeping auto/manual selector switch in manual mode and operate corresponding push button stations and electrically operated valve can be opened. Keep the valve in open position till chlorine pressure comes to 0.2 kg/cm² . pressing “off” push button, valve will be closed. Similar way manifold –ll side shall be operated. During this operation no need of opening bypass valves. During manifold-ll is in operation fresh filled tonner may be connected to manifold –l and kept ready for auto operation.
Best Deals from Distribution Point Box
Industrial Plug and Socket
90 Per Piece
200 Piece (MOQ)
Elevator Control Cabinet
15,000 Per piece
1 Piece (MOQ)
elevator control cabinet
Nylon block for Tag Print
Get Price Quote
Aneri maitri flexo graphics We at Aneri Maitri Flexo Graphics are one of the leading manufacturer of flexo Blocks ,.
Power Distribution Board Panel
Get Price Quote
What is pdb panel? Power Distribution Board (PDB pancl) is a component of an electrical system which Distribute electrical power into subsidiary circuit by circuit breaker and switch fuse unit. Power Distribution Board also known as power distribution board panel of electrical panel. In addition, equipped complete with all type of required number of air circuit breakers, switch fuse unit, contactor, protective relays, fuses, motors, indicating lamps, push buttons, busbar etc. What we are offering? Additionally, all Power Distribution Board (PDB pond) having undergo pretreatment for Dosing, Water rinsing & De-rusting/ Phosphating, also all LT panels Pointed with Powder Coat. or Synthetic enamel as per thc rcquircments. After that, seven tank proccss made by the painter, Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC hoses. Structure We are making panels With metal clad enclosed and fabricated out of high quality CRCA shoot. We provide busbar According to the air insulated and made high quality, high conductivity, high strength copper/Aluminium with ht shrinkable PVC sleeves and colour coded in red, Yellow, Blue and Black to identify the throe phases and nautral of the system as per relevant IS code. Accu Pancls is providing best quality and customized PDB panels with customized solutions as per client requirement. Protection LevelFirstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly. all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process. Standards of PDB Panel PD8 panel are designed as per IS standard IS 8623. IEC 60529.In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III. Specifications All the Panel's with metal clad, totally enclosed, rigid, floor mounted, air -insulated. cubical type suitable for operation on three phase / single phase,415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather. Applications Rcsidential,Commorcial and industrial purposcs. Hotels Hospitals Schools Cement lndustries Sugar lndustries etc.
Lighting Distribution Panel
Get Price Quote
As per require Piece (MOQ)
Weare offering lighting distribution panel. We are successfully ranked amongst the leading manufacturers and suppliers. we offering a wide assortment of lighting distribution board. These boards find applications from various industries for the purpose of power distribution of various light loads. distribution panels are designed in single front and double front versions depending on customer requirements.flush / surface mounting type distribution board with copper / aluminium busbar and inter connections. Distribution boards are available in both crca and stainless steel versions. The boards are accumulated with electric switch gears like mccbs/mcbs.
Main LT Control Panel
200,000 Per Piece
Keeping in mind the ever-evolving requirements of our precious clients, we are offering an exclusive range of DG Sync Panel. Offered panel is manufactured using premium quality components and ultra-modern technology. Provided panel is appreciated for its long functional life and easy handling feature. This panel is precisely checked by our quality controllers to assure its premium quality. Moreover, this panel is available in various specifications and at affordable prices.
Distribution Panels
100,000 - 500,000 Per Set
1 Set(s) (MOQ)
These are designed to control the speed of electric motor and feed pump. They are widely used in drilling, pumping and other large machine applications. The VFD panels are widely used in tube mills, paper mills, extruder plants, rolling Mills, cable industry and CTL Lines. They are even installed in hospitals, business houses and other public places. VFD control panel are designed to match variable speed requirements of a process unit and so are vigorously tested on various speed parameters.
HT LT Panel
Get Price Quote
Our company is engaged in manufacturing, supplying as well as exporting an extensive range of ht control panel in ahmedabad, gujarat, india. We manufacture this panel using supreme grade components, procured from the certified vendors. We provide them at very nominal rates.
ELECTRIC VEHICLES CHARGER SAFETY BOX
700 - 900 Per
10 PCS (MOQ)
electric vehicles charger safety box all ev 2 wheeler charger safety box with 5amp15amp pdu socket and 16amp mcb with lock system
Elevator Control Panel
34,500 Per Set
V-tech Engineers Gives control panel is with best safety circuit & trouble free operation with indian Economical model.
LT Panel
Get Price Quote
LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and, therefore, they are quite rugged to withstand different climatic conditions. Our LT panels are designed to work with low electricity consumption that makes them cost effective. FEATURES: Moisture resistant Hassle free maintenance Precise design
Feeder Pillar Panel
Get Price Quote
We are the leading manufacturers of variable frequency drive panels made of high grade raw material. These FEEDER-PEELER Panel are manufactured as per various industrial standards keeping in the mind the clients requirements. We offer our client variable frequency drive panel at highly competitive prices with the customized solutions The VFD panel known as also digital VFD drives is an important part of these power panels used for VFD squirrel cage induction, in motor control applications.These variable frequency drive panel are tested on various parameters before being supplied to the clients.
Power Distribution Panel
100,000 Per Set
1 Set(s) (MOQ)
ACB Distribution Panel
650,000 Per Set
1 Set(s) (MOQ)
Change Over Panel
Get Price Quote
We provide a wide range of changeover panels using advanced machines and technology and strictly in accordance with industry standards. Extensively used for providing mains and generator power change over flexibility application, our range is manufactured using high quality raw material and advanced machines.
Pole Distribution Box
Get Price Quote
OUTDOOR LIGHTING DISTRIBUTION PANEL
Get Price Quote
We offer high quality outdoor lighting panels, which are available in varied specifications as per client’s requirements. The outdoor lighting panel offered by us is very durable and is cost effective. FEATURE Available with voltmeter Outgoing MCB double door canopy
Elevator Control Panel
75,000 Per Piece