Double Girder Cranes Dealers in Kathwada, Ahmedabad

We are engaged in manufacturing, supplying and exporting premium quality Double Girder Goliath Crane, which is fabricated from high-grade raw materials. These Double Girder Goliath Cranes are manufactured as per industry standards and are completely tested and checked before they are dispatched to the clients. We also facilitate customization of Double Girder Goliath Crane as per client�s need. Features : Application specific design Heavy load caring capacity Low maintenance Consistent performance Easy to operate High efficiency Robust construction Longer service life Manufacturing Range : Available in 100t Cap., up to 25 meters span and required Height of lift (for higher capacity and lift and span please contact us) Specifications & Features : All specifications and features of these cranes are as well as Single girder EOT Crane or Double Girder EOT Crane Application areas : Ports Steel Yards Engineering Industries Cement Pipe Industries Granite Open Yard Container Deputes Storage places Shipyards Other details : Used mostly in outdoor working to handle heavy loads These Cranes run on floor mounted rail by its two legs which is fabricated from steel section or plates Available in both single as well as double type

  Top Runnign / Double Girder Overhead Cranes Cazpacity: up to 100 Ton.Span: up to 30 metersLong travel speed: up to 40 meter/minCross travel speed: up to 20 meter/min Widely used for large capacity types with longer span Used for high frequency & hard works in any motions Suitable for large headroom (distance between building ceiling and Traveling rails)

• Features: Made available in different working capacity options,Designed as per defined industry standards etc.

Double Girder Crane offered are well recognized for delivering high quality operations in given usage areas. We can make these Double Girder Crane available in different operational capacities in box type construction as well as oil splash lubricated gear box as well as presence of precision machined cut gears pinions that provide for durable as well as consistent usage values. The forged steel and wheel assemblies also ensure smooth movement of these cranes even over rough surfaces.

CRANOIST electric overhead traveling cranes are designed & manufactured accordance with IS 807, ARE 3177, code of practice for design, manufacturing, erection, testing of structural part of the crane and IS 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, worn and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.

• Brand Name: DERRICK
• Material: Mild Steel
• Color: Yellow
• Condition: New
• Automatic Grade: As Per Requirement
• Power: As Per Requirement
• Power Source: Electric
• Application: As Pre Requirement
• Certification: CE Certified, ISO 9001:2008
• Feature: Capable For Load, Customized Solutions, Easy To Use, Heavy Weight Lifting, Strong
• Load Capacity: As Per Requirement
• Type: Double Girder Eot Cranes
• Warranty: 12 Months
• Country of Origin: India
• Height: As Per Requirement
• Max. Lifting Height: As Per Requirement
• Crane Type: Double Girder Eot, As Per Requirement

• Type: Double Girder Eot Cranes
• Material: Cast Iron, Mild Steel
• Certification: ISO 9001:2008
• Application: Construction, Industrial
• Color: Yellow
• Feature: Easy To Use, Strong
• Automatic Grade: Manual, Semi Automatic
• Power Source: Electric

We at Krishna are leading Double Girder EOT Crane Manufacturer, Exporter and Supplier. Our cranes are designed for optimum efficiency, minimum losses and complete safety. That is why our cranes are made strictly according to the duty classification standards of IS – 3177. While to ensure the efficiency of the structured parts of the cranes, we follow the IS – 807 standards for designing and manufacturing them. These cranes are made with a durable design for heavy lifting and have a strong lifting and loading capacity of a staunch 1 to 50 tons. The span of these cranes is designed to be 1 to 40 metres.

• Brand Name: marck
• Material: Mild Steel
• Color: Yellow
• Condition: New
• Automatic Grade: Semi Automatic
• Power Source: Electric
• Application: Industrial
• Type: Double Girder Eot Cranes
• Country of Origin: India
• Crane Type: Double Girder Eot

• Load Capacity: 20 Ton
• Power Source: Electric
• Material: Mild Steel
• Travel Speed: 15 m/min
• Span: 15 M
• Brand: Maruti Suzuki
• Girder Type: Double
• Max Height: 30 Feet
• Voltage: 415 V
• Frequency: 50-60 Hz

• Country of Origin: India
• Color: Black, Grey, Sliver
• Condition: New, Used
• Warranty: 1 Year, 2 Year, 5 Year
• Usage: Lifting, Office, Malls, Construction, Industrial
• Finishing: Polished, Unpolished
• Specialities: Fine Finish, Excellent Design, Durable Sturdy

Double Girder EOT Crane is a highly demanded machine of ours. We manufacture Double Girder EOT Crane on a large scale for many customers. The durability of the Double Girder EOT Crane supplied by us, in addition to its ease of handling, has proved to be its USP. We also customize our Double Girder EOT Crane according to our clients’ stated specifications. Highlights Of Our EOT Cranes : Well-designed for hassle-free handlingLow maintenanceMade of the best quality materialCustomized machines available on request

Shree Shakti Engineering engaged in manufacturing and supplying a high range of Double Girder EOT crane. The offered Cranes design and developed by our highly skilled professionals incorporating latest advanced techniques and superior quality raw materials so as to meet International standards norms. The Double Girder EOT cranes are highly used in various industries, automotive, mechanical and electronic industries. To ensure good efficient performance these cranes are checked by our testing department team. Additionally this Industrial Double Girder EOT Cranes can be available at very nominal cost from us. Features of Double Girder EOT Cranes: Double Girder EOT cranes can be supported and adjusted to industrial structure necessities. Crane control to meet application through remote control or cabin control according to the requirement of the clients. Limit switches to protect the hoist and load Anti-collision protection and crane separate controls guarantee the protected operation of a few cranes It requires less maintenance cost High long and travel speed is too high performance on double Girder EOT cranes. It is very flexible, smooth operation and zero maintenance

  We at Krishna are leading Double Girder EOT Crane Manufacturer, Exporter and Supplier. Our cranes are designed for optimum efficiency, minimum losses and complete safety. That is why our cranes are made strictly according to the duty classification standards of IS – 3177. While to ensure the efficiency of the structured parts of the cranes, we follow the IS – 807 standards for designing and manufacturing them.

Double girder cranes are rugged in construction and find their use in a wide range of hoisting capacities and applications. The promoters of Aditya Cranes have experience of designing cranes up to 500 MT capacity. Double girder EOT crane find their application in power plant, workshop duty, transformer industry, cable industry, process plants, steel plants, coal fields, cement plants, engineering industry to just name a few. Heavy duty barrel winch type of double girder cranes are designed and manufactured to customer’s precise needs. We take immense pleasure in introducing our company as one of the recognized manufacturers and exporters of Double Girder EOT Crane.  Available in different capacities, these electrically operated cranes are loaded with all the advanced features.  These EOT cranes are ideal for use in ports, ship yards, cement and engineering industries. Being low in power consumption, safe and secure, our entire stock of Double Girder EOT Crane is strictly tested on various quality norms. In addition to these, all these EOT cranes are offered to our cranes at competitive prices. Double Girder HOT/EOT Cranes upto 60 M.T. capacity.Our equipments are designed and manufactured in accordance with STD I.S.

The Double Girder Cranes are generally used when heavy loads and wide spans are required. Double Girder Cranes consists of two torsion-free box Girders consists and load lifted by Crab which is running on the Top of two Girders. Platform with hand railing for easy, simple and safe maintenance of the crane extended partially or totally along the girder width. Span: 5 mtrs. to 80 mtrs. S.W.L: 500 kgs. to 1,50,000 kgs.   Crane Girder:   Crane Girders are of plate box type / standard rolled steel / compound beams. All the main butt weld joints of the web are strong and rigid structure thus 100% reliability of welded joints is ensured. The material of conforms to IS: 2062-1992.   Motors:   The motors are used specially crane duty (S4) Squirrel Cage & Slip Ring Motors suitable for frequent starting, reversing and braking in accordance with IS: 325. Motors are totally enclosed in dust proof & fan cooling (TEFC) construction, insulation class ‘F’, IP54 protection, foot / flange / face mounted.   Brakes:   Electromagnetic single – dual AC disc type / electromagnetic shoe type / Electro Hydraulic Thruster brakes are provided in all three motions. These brakes are “FAIL TO SAFE” type means automatically release when the motor circuit it  on and applied when motor circuit is off. DC brakes are also provided on request.   Gear Box:   The entire gear boxes are made of accurate hob cut helical spur gears & pinions having hardness 250 to 300 BHN made from carbon-alloy steel. All gears & pinions running on antifriction type ball / roller bearings in totally enclosed oil bath giving constant splash lubrication. The helical / spur gear designed for adequate strength and optimum wear resistance for smooth operation and long life.   Wheel Assembly:   Long travel wheels are straight treaded double flanged forged steel wheels. Wheels are supported on antifriction ball or double row self aligned spherical roller bearings in special blocks of ‘L’ type design for easy maintenance.   Speed:   Selected depending on client specifications / applications / shed dimensions.   Crane Control:   From floor through pendant push buttons, optionally through radio remote control / cabin with master control (depending on customer’s choice and application)   Power Supply System:   To Hoist and cross travel through trailing cables / Drag Chain to crane through shrouded bus bars / Trailing cable / M.S. Angle iron Conductors / Bare Copper conductors (depending on customer’s choice and application)   Electric Panel:   Modular Design ease to install and maintain, reliable operation, fuse less circuitry, ducted wiring and compact terminals. Motor overload protection to prevent overloading.   Limit Switch:   Safety limit switches for stoppers will be provided to prevent over traveling in all motions.   Painting:   Two coats of primer before assembly and Two coats of synthetic enamel after testing.

Double Girder Goliath Crane, flame proof crane, Hoist Lifts

Double Girder Overhead Cranes, Paper Core Loader Machine

Double Girder Semi Portal Crane, Flame Proof Hoist, Crane Hoist

Double Girder EOT Crane, EOT Cranes, Electrical Wire, Rope Hoist, Jib Crane