Dry Syrup Filling Machine Dealers in Ahmedabad

• Production Rate: 50 to 100 Containers/ Minute
• Input Specification: Container Diameter: 25mm to 90mm
• Input Specification: Container Height: 36mm to 300mm
• Filling Range: 5 gms. to 200 gms in single stroke with the help of dosing time and/or with help of change parts
• Filling Accuracy: + 2% depending upon consistency and uniformity of powder
• Optional Accessories: Pre/Post Nitrogen Purging Arrangement Aluminum Profile Cabinet Covering Full Machine
• Power Specification: 1.5 H.P.
• Electrical Characteristics: 440 Volts, 3 Phase, 50 Hertz
• Overall Dimension: 1500mm (L) X 800mm (W) X 1900mm (H)

SHPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine is a Compact machine used for filling and sealing of Dry Syrup in bottles. The incoming dry container (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding to the feed worm for correct spacing between two bottles and get enter into the infeed starwheel, which will be transferred below funnel, 16 nos. of funnel is mounted on round plate and powder filling head is mounted from centre pipe, which gives the flexibility to adjust position of wheel as per requirements and consumes less space on machine. Machine will be having a lifter assembly on base of bottom plate, when bottle come below funnel, bottom platform will lift the bottle and insert the bottle tight fit inside funnel. The sterilized powder is stored in to powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, powder wheel rotates at the pre-determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel and vacuum plate is provided there is no clearance between powder wheel and avacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, now doctor blades can be adjusted from outside also without removing powder hopper, when powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertical position. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the funnel. Funnel will be equipped with square rod to break the solid slug of powder and powder will start to fill inside bottle, which is moving along with funnel. In this model Bottle is getting around 5 to 6 second filling time. Bottles further move with funnel and reaches to exit starwheel, which is infeed starwheel for eight head ROPP cap sealing machine, while rotating with startwheel bottle picks up the cap from exit end of chute, ROPP caps kept in orientation unit, automatically orient caps in right direction before entering into delivery chute. And Bottle is entering below the sealing head, consisting of total four rollers, Two rollers properly Skirts, Spins and Seals the cap and simultaneously another two roller performs perfect threading according to bottle neck diameter. After sealing operation, sealing head moves upward with help of cam and bottle enters into exit starwheel. Move further on conveyor belt for next operation.      

Higher accuracy of filling up to ± 2% can be achieved for uniform density & consistency of powder under the controlled humidity < 30% by setting the depth of piston in the port of the Powder Wheel. Fast and easy Changeover for Container Size and Fill Weights All parts and assemblies coming in contact with the Powder are easily removable for Autoclaving / Sterilization. No Container- No Fill System eliminates wastage of costly powder. ALL CONTACT PARTS OF SS 316L

• Material: Powders
• Brand Name: Harsiddh
• Usage/Application: Dry Syrup Powder / Pharma
• Number Of Filling Heads: 1 / 2 / 3 / 4
• Automation Grade: Automatic
• Conveyor Height: 800 to 850 adjustable
• Output: 30 to 100 per minute
• Minimum Order Quantity: 1 Unit

Heavy duty base with robust construction off S.S. matt finished body Suitable for 5 gm to 50 gm powder filling with the help of change parts Microcontroller based system with latest technology Multiple Filling range with arrangement of different syringes and change parts No container No fill arrangement Easy and accurate adjustments of fill desired quantity with the help of change parts Various models available as per output speed requirement (1 / 2/ 4 head) Machine can be synchronized with Airjet Washing, Visual Inspection, Capping, Induction Sealing machine Suitable for Pharmaceuticals industries

• Weight: 100-500kg
• Automatic Grade: Automatic
• Warrenty: 1year
• Volume: 2 gms to 30 gms
• Output Speed: Up to 50 bottles/ minute

The Double Head Dry Syrup powder filling machine is a highly compact equipment, which is employed for filling dry syrup powder in the containers. The bottles are first sterilized and then passed to the dry syrup powder filling machine through conveyor. It is an efficient machine and is relatively easier to handle. The machine is built using high manufacturing standards, thus making it reliable.   Salient Features  Robust and vibration free design Minimum changeover time Compact & versatile design Easy to clean Suitable for different volumes   Application Filling     Industry  Pharmaceuticals Veterinary

• Type: Filling Equipment
• After-Sales Service Provided: Engineers available to service machinery overseas
• Model Number: APF-40
• Port: Mumbai
• Supply Ability: 5 Unit/Units per Month
• Packaging Details: Product & Transport Worthy Packing
• Place of Origin: Gujarat, India

• Bottle Diameter :: Upto 85mm*, Square or Rectangular bottles can be used
• Bottle Height :: 100mm* Maximum
• Cap :: any type of ROPP or Screw Cap, Sample required for evaluation
• Fill Range :: 5gms. To 70gms. In Single Dose with the help of change parts for different fill volume
• Fill Accuracy :: +/- 1 to 2% Depending upon the Powder, under the controlled level of Humidity
• Humidity :: Below 30% Rh required on machine to be arrange by customer
• Electrical :: 415VAC 3Phase and 220 VAC Single Phase Power Supply (50 Hz) with A.C. Drive
• Power :: 3.0 H.P. For Machine and 3.0 H.P. For Vacuum Pump
• Compressed Air :: Filtered, Oil Free 2kg/cm2 provided by customer only
• Vacuum :: 28” Hg. @ 300 LPM, provided by Customers only, 500LPM recommended
• Conveyor Height :: 815-940 mm
• Overall Dimensions :: 2500 mm (L) x 1750 mm (W) x 2000 mm
• Speed :: Max. 120 Bottles per minute depending on Bottle Size, Bottle Neck Diameter, Type of Powder, Fill Volume, Type of Cap and Cap Size

• Direction: Left to Right
• Production Rate: 40 to 45 Bottles/Min. (For 15 to 20 grms. filling)
• Fill Capacity: 5 grams to 50 grams (with different set of Auger and Funnel) Fill range depending upon bottle opening and bulk density of powder.
• Accuracy: ± 2% depending upon consistency and the uniformity of bulk density of powder under controlled level of humidity (i.e. 35%)
• Electrical Supply: 3.0 HP
• Power Requirement: 415 Volts, 3 Phase (4 Wire System), 50 Hz.
• Height of Conveyor: Adjustable from 900 to 950 MM
• Dimensions: 2400 MM (L) x 1100 MM (W) x 1800 MM (H)
• Net Weight: 550 Kgs. (Approx)
• Gross Weight: 800 Kgs. (Approx)
• Bottle Sizes: 15 ml. to 250 ml.

Our company is capable of delivering consignments on time owing to an efficient trading network we have. Listed amidst the renowned Suppliers of Automatic Dry Syrup Powder Filling Machine, we successfully deliver the finest range of products the clients.   Specifications  :  Output   -  40/60 Bottle/Minute (Depending on the fill size & powered characteristics)  Fill Size   -  5 Gram to 25 grams (with two different powder wheels and depending on the neck diameter and powder characteristics)  Accuracy   -  ± 1 to 2% for uniform density and free flowing Granulated powder density free flowing below 30%.  Dimension   -  1550 mm(L)- 720 mm(W)- 1800 mm(H).  New Weight   -  360 Kgs.

The Automatic High Speed Rotary Dry Syrup Powder Filling Machine Model SBPF-120R is suitable for Glass, Plastic, PET, HDPE, and LDPE Bottles with maximum speed of 100 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter.Machine in Stainless Steel Finish with heavy duty frame structure with S.S, Clading. All parts coming in contact with Powders are made from SS316 Materials as well as HDPE Funnels.The Machine works on proven time tested Vacuum and Air Systems to Fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and also avoid wastage of powder.

The Arrowfill Pack Machinery, ahmedabad based company, provide best quality dry syrup filling and packing machine. The dry syrup packing machines are auger filling machines. They are specially designed for filling particular quantity of the powder in the sachet, pouch or bottle. The machine is ideal for the non-free flow powder. Mainly it is suitable to flour, spice powder, talcum powder and dry syrup. Dry syrup filling and packing machine is fabricated with best quality of stainless steel. It can be used for the items weighing from 1 kg to 5 kg. the machine has electronic clutch and break with digital weighing system and foot switch operated.  well finish body anti rust easy operation Sturdy construction. Low maintenance Low power consumption.

Monoblock -Rotary Dry Syrup Powder Filling & Sealing Machine Application & Process : Automatic monoblock type dry syrup powder filling & sealing Machine is works on vacuum principle with rotary star wheel & piston assembly & Rotary funnel head. It is used to fills dry syrup powder in bottle in pharmaceuticals, foods, and dairy and agro chemicals industries. Automatic monoblock rotary dry syrup filling cum sealing machine is versatile, self-supported on stainless steel structures. The machine is precision built with conveyor, rotary star wheel with funnel head with Powder filing head & piston for filling and rotary capping head. Machine basic works on vacuum principle with rotary motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. Main drive of the machine, conveyor drive, rotary star wheel, Powder filling head, cap-feeding bowl, cap sealing head & drive gear motors with synchronized variable Drive and No container No filling & No cap No Sealing system arrangement. Containers are feeds from air jet cleaning machine or unscrambler and moves on SS Slat conveyor at desire speed, feeds below the funnels through feed worm & in-let star wheel with 16 station funnels. The powder filling head is mounted from centre pipe, which gives flexibility to adjust position of wheel and to be sets weight by adjust piston working. Powder is fill in hopper and agitator in hopper is fills powder in rotary filling head with consistency and uniformly. Powder wheel is consist of piston in each feeding head and vacuum plate at behind of powder wheel, which is fitted with zero clearance so, powder is fill in head by suction of vacuum and fill weight can be adjustable by piston working. After that powder head is indexing further and there is closed powder scrapper to scraps excess powder. The vacuum is remaining in head till filled head reaches in vertical position to drop powder in funnel by help of compressed air, sterilized low pressure air or nitrogen gas sequentially flushes so powder comes out from port of powder wheel and fill in to funnel. Funnels are mounted on rotary plate with aligned to bottles mouth and moves on star wheel assembly with up and down plate form to tight fit connect with funnel for filling. After filling star wheel bringing the bottles below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing and move container further process for inspection, labeling or packing. Salient Features : Designed as per cGMP - Current Good Manufacturing Practices compliance All contact parts AISI 316 & non contact parts AISI 304. Dry Syrup Powder Filling & sealing on single machine. Machine can handle 15 ml to 125 ml bottle with 22 to 25 mm cap size by change parts. To avoid contamination due to immediate sealing of filled bottle. Easily adjustable filing volume in powder wheel. Vacuum pump is incorporate with machine No bottle - No fill and No cap - No sealing for Individual head. Acrylic cabinet with aluminum section supports. Outside cap feeder system as per cGMP norms. Minimum and maximum level of cap in chute to be maintain through sensor hence to avoid damage & rubbing of cap. Powder level sensor to maintain automatically minimum & maximum level in hopper, Inching system provide for setting of filling & sealing operation. Machine structure is covered with s.s.304. Dust collector system can be supply with machine. Synchronized variable speed for conveyor, star wheel, powder feed wheel and sealing head. Rigid gear drives with motor.

• Automatic Grade: Automatic
• Condition: New
• Driven Type: Electric
• Certification: ISO 9001 2008
• Voltage: 440 Volts
• Power: 1.5 H.P.
• Weight: 250 Kgs.
• Type: Filling Machine
• After-sales Service Provided: Engineers available to service machinery overseas
• Packaging Details: Product & transport worthy packing
• Dimension(L*W*H): 1400mm (L) X 800mm (W) X 1900mm (H)
• Brand Name: Adfinath

• Machine Length: 1600mm
• Machine height: 1800mm
• Model: LSCS – 200

Automatic High Speed Eight Head SCREW Cap Sealing Machine Model LSCS –200, It is supporting to our range of Bottle Filling from Semi-Automatic to Automatic line Previously filled bottles with Dry Syrup Powder or Liquid Syrup are continuously fed from filling machine to the flat conveyor belt of sealing machine and move further through Infeed worm for correct spacing between two bottles and transferred to the Infeed star wheel. SCREW caps kept in orientation unit automatically orient caps in right direction before entering into delivery chute. And Bottle is entering below the sealing head, consist of total four rollers. Two rollers properly Skirts, Spins and Seals the cap and simultaneously another two roller performs perfect threading according to bottle neck diameter. After sealing operation, sealing head moves upward with help of cam and bottle move with exit star wheel and Move further on conveyor belt for next operation.

• Power: 1.5 H.P. For Machine and 2 H.P. For Vacuum Pump
• Model: HRDS-100
• Bottle Diameter: Upto 85mm, Square or Rectangular bottles can be used.
• Bottle Height: 100mm Maximum
• Fill Range: 5gms. To 70gms. In Single Dose with the help of change parts for different fill volume.
• Fill Accuracy: +/- 1 to 2% Depending upon the Powder, under the controlled level of Humidity.
• Humidity: Below 30% Rh required on machine to be arrange by customer.
• Electrical: 380 V, 3Phase OR 220 V,1 Phase, 50 Hz with A.C. Drive.
• Compressed Air: Filtered, Oil Free 2kg/cm2 provided by customer only
• Vacuum: 28” Hg. @ 300 LPM, provided by Customers only, 500LPM recommended
• Conveyor Height: 815-940 mm
• Overall Dimensions: 1500 mm (L) x 1000 mm (W) x 1600 mm
• Speed: 80 Bottles per minute depending on Bottle Size, Bottle Neck Diameter, Type of Powder and Fill Volume

The output of the machine depends on powder’s inherent characteristics, ambient atmospheric conditions, fill volume and container geometry. * Specification subject to change without prior notice. Application: To fill PowderDry syrup in containers To fill PowderDry syrup in containers Container Diameter:- 30-90mm Container Height:- 50-150 mm Dose:- upto 150 gm

DESCRIPTION   Harsiddh introduces compact, flexible and easy operating rotary dry syrup powder filling machine made from the sturdy stainless still materials to make the efficient filling of dry syrup powder. The filler consist the vibration free platform for smooth trouble free operation for long hours. Being a leading manufacturer, supplier and exporter of rotary dry syrup powder fillers, we provide GMP models with CE certifications.   Our machines are highly accurate with filling precision of +/- 1 to 2% depending on powder at controlled humidity below 30% Rh and contain auto infeed and exit through star wheel system. The system is equipped with auto machine on/off system. The unit bears the bottle height up to 100mm and diameter up to 85mm for rectangular or square bottles. The machine throughput is 80 Bottles per minute depending on Bottle Size, Bottle Neck Diameter, Type of Powder and Fill Volume. Our dry syrup powder fillers are highly efficient and CE certified.   SALIENT FEATURES No Bottle – No Fill System. Rotary Bottle Movement System with Rotary Funnel System. Funnel with unique vibratory system for filling semi free flow powder at higher speed. All contact parts with easy removal system for AutoClaving / Sterilization. Machine construction in AISI 304 material. Filling Accuracy of +/- 1 to 2% depending on powder at controlled humidity below 30% Rh. Automatic Infeed and Exit of Bottles through Star Wheel System. No Bottle at in feed conveyor – Automatic Machine on / off system. TECHNICAL SPECIFICATION Model HRDS-100 Bottle Diameter Upto 85mm, Square or Rectangular bottles can be used. Bottle Height 100mm Maximum Fill Range 5gms. To 70gms. In Single Dose with the help of change parts for different fill volume. Fill Accuracy +/- 1 to 2% Depending upon the Powder, under the controlled level of Humidity. Humidity Below 30% Rh required on machine to be arrange by customer. Electrical 380 V, 3Phase OR 220 V,1 Phase, 50 Hz with A.C. Drive. Power 1.5 H.P. For Machine and 2 H.P. For Vacuum Pump Compressed Air Filtered, Oil Free 2kg/cm2 provided by customer only Vacuum 28” Hg. @ 300 LPM, provided by Customers only, 500LPM recommended Conveyor Height 815-940 mm Overall Dimensions 1500 mm (L) x 1000 mm (W) x 1600 mm Speed 80 Bottles per minute depending on Bottle Size, Bottle Neck Diameter, Type of Powder and Fill Volume

The Automatic High Speed Rotary Monoblock 16x8 Head Dry Syrup Powder Filling & Capping Machine Model PF-150D, is suitable for Glass, Plastic, PET, HDPE, LDPE Bottles with maximum speed of 150 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter.   The Machine works on proven time tested Vacuum and Air Systems to Fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and body keeps bottle clean and also avoid wastage of powder.   TECHNICAL SPECIFICATIONS Bottle Diameter : Upto 85 mm*, Square or Rectangular bottles can be used Bottle Height : 200 mm Maximum* Cap : Any type of ROPP or Screw Cap, Sample required for evalution Fill Range : 5 gms. to 70 gms. in single dose with the help of change parts for different fill volume* Fill Accuracy : +/- 1% to 2 % Depending upon the powder, under the controlled level of Humidity Humidity : Below 30% Rh required on machine to be arrange by customer Electrical : 415 VAC 3 Phase and 220 VAC Single phase Power supply (50 Hz) with A.C. Drive Power : 3.0 H.P. for Machine and 4.0 H.P. for Vacuum Pump Compressed Air : Filtered, Oil free 2kg/cm2 provided by Customer only Vacuum : 28" Hg. @ 300 LPM, provided by Customers only, 500 LPM recommended Conveyor Height : 815-940 mm Overall Dimensions : 2500 mm (L) x 1750 mm (W) x 2000 mm (H) Speed : Max. 100 Bottles per minuite depending on Bottle size, Bottle neck Diameter, Type of powder, Fill Volume, Type of cap and cap size.

Item Code: AEDPF-60We are engaged in manufacturing and exporting of Dry Syrup Powder Filling Machine Model No. AEDPF -60, which has a Dry Syrup Powder Filling Machine capacity of 5 gms to 30 gms/ single doze with different powder wheel fill depending on neck diameter and powder characteristics. Our range is available in dimensions of 1525 mm [l] x 675 mm[w] x 1700 mm [h].approx. Technical specification:Output: Up to 60 bottles/ min. For single dose Up to 30 bottles / min. For double dose Up to 20 bottles / min. For triple dose Accuracy: +- 2% for depending upon the consistency, uniformity & bulk density of powder under the controlled level of humidity below 30%. Powder wheel piston adjustable depending to Dry Syrup Powder Filling Machine. Body makes to M.S. Angle structure all covering to SS 304 Bottle setting separate adjusting for centering to powder filling station Description: Bottles come from two ways conveyor & stopping by star wheel & fill through dozing wheel Can fill up to 30 gms can fill by double doze Setting of the dozing size is to be made by the help of dozing arrangement [dozer]

• Production Rate: Up to 100 to 120 Bottles / Min.
• Net Weight: 1700 KGS. (Approx.)
• Gross Weight: 2200 KGS. (Approx.)

High Production Capacity in High Filling Quantity also. M.S. Molded structure duly powder coated to avoid any vibration with adjustable Screws to adjust conveyor height as per in feed tunnel. Total Compact Monoblock CGMP model. All parts and assemblies coming in contact with powder are made of S.S.316 “NO BOTTLE, NO FILL” System eliminates wastage of costly powder. Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white particle shading during production. Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and chances of area condition disturbance. All assemblies under top plate are positioned as for easy cleaning or maintenance. All driving is through High quality imported Gear motor. Machine speed can be adjusted through A.C. Frequency drive, which is time saving. Machine is provided with Delrina conveyor belt to avoid sticking of bottle on conveyor. Special clutch devices are provided on Star wheels for safety purpose. Air filter will be of S.S.316 housing with Nylon cartridge for proper removal of particle of 0.22 micron having 10″ length. Vacuum filter will be of PVC transparent material with nylon cartridge having length of 10″ of 5 micron. Machine can fill 10 grams to 70 grams powder in single stroke.

We are offering dry syrup powder filling machine. Model no. af - d - 100 direction left to right production rate 40 to 45 bottlesmin. (for 15 to 20 grms. Filling) fill capacity 5 grams to 50 grams (with different set of auger and funnel) fill range depending upon bottle opening and bulk density of powder. Accuracy ± 2% depending upon consistency and the uniformity of bulk density of powder under controlled level of humidity (i.e. 35%) electrical supply 3.0 hp

Ampoule Washing Machine, Pharmaceutical Consultants

single multi head screw capping machine

labelling machines, aluminium cap sealing machines

dry syrup powder filling machine, Rubber Stoppering Machine

Pharmaceutical Machineries, cap sealing machines

Chocolate Shreading Machine, Edible Oil Filling Machine

Commercial Cooling Tunnel