Back Back
Solar Hybrid Dryer
65,000 - 150,000 Per piece
1 piece (MOQ)
Air Dryer
1,000,000 Per unit
Best Deals from Dryers
Pharmaceutical Dryer Machine
Get Price Quote
1 Piece(s) (MOQ)
Stainless Steel Polished Paddle Dryer
800,000 - 1,500,000 Per Unit
1 Unit (MOQ)
Air Dryers
45,001 - 55,000 Per Piece
Vertical Hopper Dryer
80,000 Per piece
1 piece (MOQ)
industrial tray dryer
Get Price Quote
tray dryers are useful in chemical, dyestuffs, pharmaceutical, food and automobile industries. a tray dryer is an enclosed, insulated housing in which trays are placed on angled rack. material to be dried is placed on the trays. heating media is hot air, and heat transfer is direct from hot gases or electric heaters to wet raw material with help of specially desig ned air circulation fan arrangement to maintain the constant temperature in the dryer and ensures uniform circulation of hot air. this will enhance the drying of raw material & reduces the drying time drasticallylaxmi en fab drying oven or tray dryer is specially designed for pharmaceuticals, food, chemicals, paints, textiles & other industries. it is well accepted for economical drying of granules, powder , food material & chemicals. the advantages and disadvantages of this system are:� simple, low cost chamber� low labour costs - simply load and then unload� a tendency to over-dry the lower trays� design for uniform circulation of hot air in the drying chamber� heating cold and fan motor having electrical inter locking for safety of heating elements we are a leading manufacturer of tray dryer at ahmedabad, gujarat, india. we supplied this tray dryer in ahmedabad, chatral, valsad, mahuva, ankleshwar, padar, pune, mumbai, nagpur,ratanagiri .
Air Dryers
Get Price Quote
We offer air dryers. The simplest way of removing moisture from compressed air is to reduce the temperature. In this dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3 deg c is passed through the other side of the heat interchanger. At this temperature most of the moisture is condensed which is then separated and drained out in moisture separator. Salient feature:- simple non cyclic operation. Low operating cost. Low noise. Zero purge loss even lubricated air can be dried suitable for any capacity pdp of 3 deg c electronic control environment friendly refrigerant.
Tray Drier Machine
Get Price Quote
Tray Dryer Machines are a type of powder dryer machines that are commonly used in cases where quantity of moisture in the product is more and the materials have to be dried at a low temperature for long duration. Our company provides tray dryers in a range of different number of trays, according to the requirement of the product and the industry. Tray dryers can be steam and electrically heated. Operation: Air Circulation: Air circulation is done by specially designed recirculation blowers inside the dryer. The blower capacity, static & design depends on the size and model of dryer. Heating: Dryers are normally supplied with either steam/electric/thermic fluid/hot water heating system. Suitable heating coils/calorifiers/controlling unit are provided in the dryers. Temperature Control: Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic. Features :- Easy dismantling Optimal surface finish Low power consumption NOTE : Technical details, specification & designs are subject to change without any prior notice.
Refrigerated Air Dryers
23,000 - 500,000 Per Piece
1 Piece(s) (MOQ)
Sand dryer
1,100,000 Per
Tray Dryer
Get Price Quote
Tray Dryer is available from 6 Trays to 96 Trays in dirrerent model with SS 316 Trays for the drying of material with 70 to 80 degree temperature (Available with Steam & Heater Operated Models).
fluid bed dryer machine
450,000 - 600,000 Per Piece
1 Piece (MOQ)
Tray Dryer
Get Price Quote
We bring forth highly precise Tray Dryer that is used for drying and dehumidification of moist pharmaceutical samples. Our Vacuum Tray Dryer is effectual for drying different kinds of materials as they temperature ranges from 30° C to 150° C. Rotary Tray Dryers are attached with electrical heaters. Moreover, we are one of the eminent Pharmaceutical Tray Dryer Manufacturers in India.
Hopper Dryer
32,000 - 500,000 Per Nos
1 Nos (MOQ)
PLASTIC GRANULE DRYER 25KG TO 2000KG
Drum Dryer
Get Price Quote
Drum DryerFlakers are used to convert solid flakes from slurry by either applying heating media or chilling media, depending on materials and their properties. This is achieved by forming a thin Layer of Molten Slurry. Molten Slurry is fed into a single or double Drum dryer and the materials are dried in single rotation and scrapped out by adjustable scrapper Blades. Drum Dryer is made from MS, SS304SS316, Alloy material and MS with Hard Chrome materials. Enclosure is provided for Vapor extraction by vacuum blower. It is dust tight so prevent atmosphere and nitrogen purging is possible.
Refrigerated Air Dryer
5,000 - 50,000 Per piece
1 Piece (MOQ)
Vacuum Tray Dryer Machine
Get Price Quote
vacuum tray dryer - 6-16 shelf vacuum tray dryer machine manufacturer we are providing the vacuum tray dryer machine to our customers. Mostly used for drying of thermal sensitive materials, these tray dryers have a number of applications chemical and pharmaceutical industries. By procuring the quality assured stainless steel from our reliable and trusted vendors, the offered tray dryers are manufactured under the strict vigilance of our qualified professionals. Also, these tray dryers are known for their smooth finish and sturdy construction. features:- vacuum tray dryer machine smooth finish sturdy construction longer service life
Vacuum Tray Dryer
Get Price Quote
Vacuum Tray Dryer is needed mainly for drying of high quality, temperature and breathable oxygen sensitive products. Vacuum Tray Dryer is highly made for drying hygroscopic materials, which are dried to small residual moisture, information level. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. Is suitable for drying of thermal sensitive components easily resolved, polymerized of deteriorated under high temperature. Sterilization can be conducted prior to the drying process, where no matter is allowed to enter the item. Static vacuum tray dryer eliminates the configuration damage in the drying materials therefore trusted in pharmaceutical, chemical compounds and foodstuff etc. Features : All stainless steel 304/316/ 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts) Hollow pad type heating shelves which are easily removable for maintenance Condenser and condensate receiver fitted on the dryer body or stand alone for remote installation Fully welded skirt on vacuum dryer body for flush mounting through the wall. Steam sterilizable models available. Double door loading available for larger models.
pneumatic flash dryer
Get Price Quote
We offer pneumatic flash dryer. Pneumatic flash dryer will be effectively used for drying the wet material and convey it. The drying takes place in wide and high vertical tube. The material is sucked into the tube with a negative suction. The hot air is also carried with the material. Cyclones will be attached for the air and material separation. Necessary air lock will be provided with the system.
Fluid Bed Dryer
Get Price Quote
We are the credible Manufacturer, Exporter and Supplier of Fluid Bed Dryer from Gujarat (India). Precisely engineered and produced using high-grade stainless steel, our FBD (Fluid Bed Dryer) is corrosion resistant, robust, durable and performance oriented. It is widely used in pharmaceutical industry owing to its ability to dry granulated materials from wet granulation. For price quotes, stay assured to get what’s the best in market.Features : Optional single piece retarding chamber and finger bag chamber with imported inflatable seals Optional hinged swing type retarding chambers Bucket type bottom chamber above ground level Spray granulation Pneumatic lifting & locking for product container with retarding chamber Heating by electricity (upto 120 KG models only), steam / thermic fluid OR diesel oil / LPG gas fired hot air heating Systems with stainless steel heat exchangers Fully automatic bag shaking Intrinsically safe earthing arrangement Inlet-air filtration system with 0.3 micron hepa filters Rear chamber with heating coils and air inlet filter modules to be mounted in remote areas Fan motor unit to be mounted in remote areas Stainless steel interconnecting duct lines with flanges for connecting remote mounted heating and fan motor modules Noise level below 90 DB with specially designed silencer Microprocessor based control panels with time v / s temperature controls, batch programming, batch data printout. Other details: Model : 10, 30 ,60 ,120 ,200 ,300, 400, 500 Drying capacity per batch : 10 / 15,30 / 40,60 / 75,120 / 150,200 / 250/ 300 / 350,400 / 450,500 / 550 Product container volume (liters) : 30,100,200,440,670,1000,1330,1660 Motor (hp / kw) : 2 / 1.5,5 / 3.7,10 / 7.5,15 / 11/ 20 / 15,25 / 18.5,30 / 22.5,40 / 30 Heating load (kw) : 9,18,30,60
Fluid Bed Dryer
550,000 Per Units
1 Units (MOQ)
Automatic GMP Tray Dryer
Get Price Quote
Venturis Dryers
Get Price Quote
Venturies or pneumatic dryers offer an economical means of continuously drying a wide range of granular, powdery or pasty materials.
Heatless Air Dryer
100,000 Per Piece
Tray Dryer
Get Price Quote
This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.
Fluid Bed Dryer
Get Price Quote
Fluid Bed Dryer Has Adopted New Concept Of GMP Regulation With Improved Performance (drying Time Is Much Less Than The Conventional Model) Minimum Involvement Of Manual Labor Simplified Maintenance And Utilize Modular Construction Techniques To Provide Flexible Installation Options. The Process Unit Is Two Piece Made Of SS-304/316 Stainless Steel. Through Mixing Of Dry Powders, Agglomeration And Drying Are Carried Out In One Unit Of Fluid Bed Dryer. The Salient Feature Of Fluidized Bed Dryer Is As Follows. 1) PROCESS UNIT The Process Unit Is Two Piece, Made Of Stainless Steel Of SS-304 GRADE. All Process Contact Parts Are Made Of SS-304 Grade. The Finish Employed Externally Will Be All Welds Ground Back And Polished Into The Surrounding Materials. All Of The External Surfaces Of The Dryer And All Non Contact/sight Parts Will Prepared With A Uniform Fine Texture Matt Finish. All Of The Product Contact Surface (SS-304) Are Mirror Finished. Particular Attention Has Been Paid To Reduce Any Source Of Material Entrapment By Mirror Polishing Flush All Welds To Create Crevice Free Profiles Both Internally And Externally. The Expansion Chamber Containing The Filter Finger Bags & Dished End Are Made Of Single Piece Construction From SS-304/316 Quality Steel. Below That Is The Retarding Chamber Made Out Of S.S. 304 Retarding Chamber Is Locked With The Explosion Chamber By Means Of Clamps. The Length Of The Retarding Chamber Is Such Designed , Thereby Providing Extra Large Heat Exchange Are Which Exposed Each And Every Particle Or The Charged Batch In The Fluidized Air Resulting In Instant Drying. Specially Designed Base Is Provided For Air Vortex Effect And To Give Added Strength. A Central Drain Is Provided In The Base To Release Wash Water. 2) BOWL/ PRO DUCT CONTAINER Product Bowl Is A Conical Shaped Manufactured Form SS-304 Grade Stainless Steel Having Stainless Steel Mesh Support Along With Fine Finish Air Mesh. The Product Container Trolley Is Of Tubular Construction Made Form SS-304 Pipe Mounted On Polypropylene Castor Wheel (2nos Fixed & 2nos. Swivel For Maneuverability ) Which Imparts Rigidity To Carry The Product Container With The Charged Load. The Batch Loading Capacity Is Always Higher In Case Of “BOMBAY” Fluid Bed Dryer, Because Of Better Fluidisation By Varying The Frequent Shaking Of The Finger Bags. Shaking Period Vary Depending On The Nature Of Products. 3) RUBBER GASKET:- A Solid ‘D’ Shaped Food Type Silicon Rubber Gasket Is Provided In The Groove Of The Flanged Joint (between The Product Container And The Retarding Chamber) To Prevent Any Leakage Of Air With Fines During Operation. 4) UNIFORM LIFTING OF CONTAINER Product Container Is Lifted By Specially Designed Arrangement With The Help Of One Centrically Fitted Pneumatic Cylinder Which Ensures Uniform Lifting Throughout The Periphery Of The Container Which Ultimately Gives Uniform Upward Pressure To The Solid ‘D’ Shaped Rubber Gasket, Thereby Preventing Any Leakage During Operation. 5) AUTO SHAKING DEVICE Pneumatic Cylinder Is Used For Auto Shaking Device Of The Finger Bags Is Mounted On The Body And Is Fitted With A Wire Rope Made Out Of S.S. 304 Guided By Pulleys Thus Rendering The Shaking Extermely Efficient. It Also Brings Down The Finger Bags To Such A Level That These Can Be Inspected Very Easily Form The Bottom Of The Retarding Chamber. If The Shaking Is Not Efficent , The Particles Will Be Retained In The Finger Bags And There Will Be No Proper Fluidisation Resulting In Formation Of Lumps In The Products Container. 6) AIR HANDLING UNIT :- Blower And Filter With Heating Arrangement Are Housed In The Rear Chamber . They Can Also Be Housed The Services Zone To Avoid Sound Pollution As Well As To Avoid Interference Of The Maintenance People In The Production Zone. :: BLOWER Centrifugal Type Blower Fan With Dynamically Balanced Impeller And Backward Curved Blades.All Stainless Steel Construction.Direct Coupled Non—flameproof Electric Drive. Anti –vibration Mounting And Independent Sub-support Frame. :: Air Filter:- Free Standing Unit Constructed From Aluminum Anodized Frame Work (SS-304) With Doubled Skinned Panels. All Wall Panels Are Cross Based For Added Strength. Quick Release Panels Provided For Inspection And Maintenance Access.The Air Intake Section Has A Full Face External Flange For Attachment Of Angle Intact, Or And Extended Inlet Air Duct.Inlet System Comprssiong Of 20 Micron Washable Filters. Followed By 5 Micron Prefilter, Then Pass Through , Heating Coil Section Containing A Full Air Duct Steam Operated Heater Battery, Constructed With Stainless Steel Tubes And Headers And A Steel Casing (SS-304). The Moving Process Air Passes Through The Steam Heater To Achieve The Desired Temperature. To Match The Inlet To The Processing Unit.PT 100 Temperature Sensing Probe Will Be Fitted Into The Air Transtion Duct And Will Be Connected Upto The Control Panel. 7) EXPLOSION VENT As Per International Practices The Equipment Is Provided With A Rapture Disc As Measures Of Explosion Vent, Tested At 2 Bar Pressure, Mounted On The Side Of The Dryer. 8) EARTHING DEVICE A Std Designed Earthing Device Spring Type Is Provided With The Dryer However Intrincically Safe Earthing Device With Low Voltage Relay Is Also Available. 9) ELECTRO PNEUMATIC CONTROL PANEL A Free Stading Steel Control Panel Having The Following Controls. Inlet Air Temperature Controller. Exhaust Air Temperature Indicator Product Bowl Lifting & Lowering Valve. Process Air Damper Regulation Blower Motor, Start & Stop. Compressed Air Pressure Quages. Filter Bag Shaking Timer solenoid Valves Etc. 10) PROGRAMME LOGIC CONTROL SYSTEM :- Semi-automated And Fully Automated PLC And PLC/PC Control System Are Available For Selection At An Appropiate Level Of Additonal Cost. (OPTION)
Granule Dryer
Get Price Quote
Y Type Strainer
40 - 200 Per Piece
Simply stated, a strainer is also a filter; however, it uses a perforated plate or screen mesh to remove larger particles from a process stream. The major advantage of a Strainer is that it is reusable. With reasonably lower capital &operational cost. There are three levels of strainers-coarse, medium & fine. Features & Benefits Superior flushing capabilities, thanks to inherent built-in blow-down ports. Quick opening style covers. Better value for money with initial costs. Higher flow capacity despite smaller open ratio areas, thanks to a straighter flow path, Greater levels of flexibility. Chamber covers can be opened without process fluid draining out whilst installed horizontally. This is beneficial in more hazardous processes. Better suited to transferring fluids at higher velocities. Ideal for larger pipeline applications which require quick access to the strainer. Application Pump protection Raw Material transfer Cooling tower water filter
Dehumidifier Air Dryer
Get Price Quote
1 Piece (MOQ)
We are offering dehumidifier air dryer. the megna series is the highest state-of-the-art dehumidifying line of the entire range, combining all the characteristics and the performance of the megna series with a very innovative user interface equipped with a highly intuitive touch-screen panel. The machine operating status is shown in real time on the screen and all the parameters are available in graphical form. an online help service provides a useful support for the operator. Among the standard equipment features are dew point control and a weekly timer. The user can set the required language on the control panel. • no air adaptability • touch screen user interface • high performance: dew point -75°c • total regeneration energy recovery new crystallizer realized to guarantee the maximum reliability in the crystallizing process, sturdiness, easy maintenance and parts inspection. Equipped with plc control, touch-screen panel and innovative opening system of the hopper. Particularly strong agitating shaft, equipped with interchangeable blades and bridge break device. the motor is connected to the shaft by a epicyclic reduction and coupling joint. The strong shaft is center lined into the hopper in order to avoid any misalignment. The crystallizer is equipped with powder remover as standard in the exhaust air circuit and it complies with the last regulations of the ce directives. • touch-screen control • access to cone via innovative opening design • powder remover as standard • interchangeable blades of the agitating shaft
Filter by Localities
