Dual Valve Dealers in Kathwada, Ahmedabad

Dual Plate Check Valves are fabricated with the dual plates that have rubber or metal seat so as to offer the ability to manage different kinds of fluids. These valves are corrosion-resistant and have a very good resilience. They can be installed rapidly & easily. Also, they have excellent resistance from abrasion. They are designed and produced as per API 594.

• Pressure Rating: ASME- 150#, 300#, 600#
• End Connection: Sandwich/ Flanged
• Size Range: 50 NB through 900 NB
• Type: Dual Disc Fully Rubber Lined/ Unlined Body
• Operation: Automatic with Return Pessure
• Port Opening: Full
• Seat: Soft - Rubber/ Metal to Metal
• Disc: Dual Disc Spring Loaded
• Gasket & Packing: Graphite/ PTFE
• MOC: Refer Material Chart
• Design Code: API - 594
• Testing: API - 598
• Inspection: 3rd Party/ Client/ Manufacturer

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.   Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.   Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.   This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage aRotary Feeder   Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.   Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.  

• Brand Name: Allines
• Pressure Rating: ANSI 125,150,250,300 & PN 25
• Feature: Low pressure drop hence lover energy loss,It weighs about 1/5th weight of conventional valve etc.
• Place of Origin: Ahmedabad  
• Applications: Water,Air,Oil,Gas,Steam or any other fluid
• Size Range: 2” (50 MM) to 24” (600 MM) N.B.
• Packaging: Bulk

Sand Casting Dual Plate Check Valve, offered by us, is widely appreciated for its superior quality, efficient functionality and durable life. Our Sand Casting Dual Plate Check Valve is hydraulically engineered by the experts in strong, light and small size. In addition to this, our Sand Casting Dual Plate Check Valve offers flexible installation in horizontal or vertical line without any special pipe support. Sand Casting Dual Plate Check Valve find application in water pipes, air pipes, gas pipes etc. Design Features : “Dual Plate Check Valve” is an all purpose Check Valve (NRV). The Valves are designed to API 594 and comply with API 598 Valves inspection & testing standard. This design has distinct advantages over conventional Swing Check Valve or any single disc design It weighs about 1/5th weight of conventional valve Salient valve – Water hammer & Slamming almost eliminated Low pressure drop hence lover energy loss Size range : - 2” (50 MM) to 24” (600 MM) N.B. Pressure rating : - ANSI 125,150,250,300 & PN 25 Constructions : Body & Plates : C.I./C.S./S.S./ALLOY STEEL/AL. Bronze to A-216 Gr. WCB, CF8, CF8M, LCB, B.S.1400 AB 2 OR any other alloy as per Buyer’s specifications Hinge & Stop Pin : Stainless Steel or Bayer’s specification Pin retainer : C.S./stainless steel or Bayer’s specification Springs : S.S.-304 / S.S. 316 / Inconnel Seal : Buna –N, Viton –A or metal to Metal End Facing : Plain Face, Raised Face or Ring Joint Facing Technical data : Dimensions as per API-594 expect for ANSI-125 series Hub diameter (A) can be supply to Suit Flange Sizes as per BS / ANSI / DIN/ JIS or any other standard as per Bayer’s Specifications The Valves are also available with Flanged Ends with Wafer Design as well as is long pattern having face to face Dimensions as per BS-1868 / API 6D / ANSI B-16.10 Applications : Water Air Oil Gas Steam or any other fluid

We are offering double flanged end butterfly valve, jupiter controls double flanged all butterfly valve seating design bonded mouling type. Double flanged butterfly valve size range start from flange drilling accordance jupiter controls also offer flangd end butterfly valve with manual operators (worm gears), pneumatic rotary quarter turn actuator, electric actuators and all associated accessories. Double flanged butterlfy valve is best option to save cost of valve,double flanged butterfly valve as per bs 5155,double flanged butterfly valve as per api 609,double flanged butterfly valve as per awwa c 504,flanged end butterfly valve flow control lever operated,flanged end butterfly valve gear actuator operated,flanged end butterfly valve pneumatic actuator operated,flanged end butterfly valve electrical actuator operated,

• Country of Origin: India
• Type: Double Union Ball Valve
• Material: Plastics
• Application: Industrial, Machinery, Agriculture
• Color: Grey
• Feature: High Dimensional Accuracy, Honing Raceways, Long Life, Smooth Runnig, High quality pressure
• Brand Name: Flotec
• Pressure: 142psi
• Temperature Of Media: 100
• Material: Pvc
• Color: Dark grey
• Type: Double union
• Brand: Flotec
• Size: 2 , 2.5 ,3 inch

• Design Standard: API 594
• Size Range: 2" to 8"
• Rating: ANSI # 125
• End Conncection: Wafer Type
• Sheet: Nitrile / EPDM / Vition
• M.O.C.: Cast Iron to IS 210 GR. FG 200 / Cast Carbon Steel ASTM A 216 GR. WCB

Disc Butterfly Valve, Wafer Type Double Eccentric Disc Butterfly Valve, Replaceable PTFE Seated Butterfly Valve, Renewable Teflon Seat Butterfly Valve Spherical Disc - Double Offset Disc - Eccentric Disc Design Butterfly Valve Flow Control Lever Operated - Model Series: WBFSP1/6Double Offset Disc - Eccentric Disc - Spherical Disc Design Butterfly Valve Gear Operated - Model Series: WBFSP1G/6GEccentric Disc - Spherical Disc - Double Offset Disc Design Butterfly Valve Pneumatic Actuator Operated - Model Series: WBFSP1P/6P Double Offset Disc Butterfly Valve Manufacturing Size Range:  DN25/25mm/One Inch, DN40/40mm/One and Half Inch, DN50/50mm/2”/Two Inch, DN65/65mm/2-1/2”/Two and Half Inch, DN80/80mm/3”/Three Inch, DN100/100mm/4”/Four Inch, DN125/125mm/5”/Five Inch, DN150/150mm/6”/Six Inch, DN200/200mm/8”/Eight Inch, DN250/250mm/10”/Ten Inch, DN300/300mm/12”/Twelve Inch, DN350/350mm/14”/Fourteen Inch, DN400/400mm/16”/Sixteen Inch, DN 450/450mm18”/Eighteen Inch, DN500/500mm/20”/Twenty Inch, DN550/550mm/22”/Twenty Two Inch, DN600/600mm/24”/Twenty Four Inch size.   Zero Leakge, High Performance, Spherical Disc, Dual Eccentric Disc, Double Offset Disc Butterfly Valve have been developed with extensive application, design and manufacturing expertise. Nivz make High Performance, Renewable PTFE Seat, Wafer Type - Flangeless Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an replaceable Teflon or Elastomer Rubber Seat. Double Offset Disc Butterfly Valve wafer type body having two nos. flange locating holes for sizes up to 12” and from size 14” and above 04 nos. for easy alignment of valve during installation. Flange locating hole confirm to as per ANSI B 16.5 Class 125 & Class 150 / BS 10 Table “D”, “E”, “F” / PN 6, PN 10, PN 16 or other international standard. We are also manufacturers and exporters of Double Flanged End Double Offset Disc Butterfly Valves with renewable type seat with Flow Control Lever, Gear, Pneumatic Actuator, Motorized Electrical Actuator Operated. Spherical Disc Type butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs. Our manufacturing range of Double Eccentric Disc Design Butterfly Valves body seat mechanism have a very low torque, tight shut off with zero leakage, compact actuator selection, and long life smooth easy operation. High Performance type eccentric disc design valves are widely available with different combination of body, seat & disc materials to satisfy the need of most industrial application. We manufacture and exporting zero leakge, dual eccentric disc butterfly valves with variety of elastomer rubber seat to suit various industrial application. Our seat range of elastomer covers EPDM, NBR, Buna-N, Nitirle, Silicon, Viton, Hypalon, PTFE. Our Size range of Butterfly Valve cover up to 24" (DN600/600NB/600MM) Size. Nivz Valve & Automation also manufacturing butterfly valves in special grade of material like CN7M-Alloy20, Nickel Aluminium Bronze, NAB2, Hastelloy C22/276, Monel, SS304L, SS 316L, SS317L, D2205, D2507, 4A, 5A & Super Duplex Steel for Sea Water & Corrosive application. Butterfly Valve Various Operation Option Nivz make Slim seal design center disc zero leakge wafer type body Butterfly Valves are generally supplied with manual flow control hand lever operation up to 8”(DN200) and above size valve quarter turn worm gear unit operated. Nivz Valves & Automatin also offering Butterfly Valves with either Pneumatic or Motorized Electrical actuator (single phase or three phase) operated for automation. Remote operated butterfly avaliable for ON/OFF as well praportional modulating control function with required all accessories. We are also manufacturing of Quarter Turn Worm Gear Operated Double Offset Butterfly Valve, Pneumatic Actuated Eccentric Disc Butterfly Valves, Pneumatic Actuator Operated Spherical Disc Butterfly Valves, Double Acting Actuator Operated Dual Offset Disc Butterfly Valve, Single Acting Spring Return Actuator Operated Wafer Type  Butterfly Valve, Electrical Actuator Operated Offset Disc Design Butterfly Valve, Motorized actuator Operated Spherical Eccentirc Butterfly Valve, Remote Operated High Performance Butterfly Valve, On-Off Butterfly Valve Double Flanged End, High Performance Butterfly Control Valve, Modulating Type PTFE Seated Butterfly Valve, We can do provide any of automation in Butterfly Valves.  We have more than 20 years of experience industrial process system field automation. Butterfly Valve can also available with accessories like Gear Box, Solenoid Valve, Air Filter Regulator, Silence, Manual Override, Valve Positioners, Relay etc. We are one of the leading Butterfly Valve Manufacturers Exporters Supplier Stockiest in India. Nivz Valves a best quality Butterfly Valve Manufacturer, Stockist, Supplier, Exporter, Importers.   Salient Features of Double Offset Disc Butterfly Valve Flangless - Wafer - Sandwich Type Greater Sealing Capacity Soft Seat Design, Easy to replace Lower Torque with any fluid Permanently tight closure Uni-Directional Valve Suitable for On-off as well as Throttling Service Materials for almost all media Short Face To Face Dimension Wafer compact design Body Long Service Life Smooth, Easy Operation Maintenance Free Version Less Weight, Easy To Install Leakage Class VI (Zero Leakage) Application of Spherical Disc / Double Offset Disc Butterfly Valve Pharmaceutical Industries Water Treatment Plant Cement Plant Thermal Power Plant Paper Industry Tyre Manufacturing Plant Sugar Industry Breweries Chemical Industry Waste Effluent Treatment Plant Drilling Rigs Gas Plant Steel Plant Cooling Water Circulation Heating & Air Conditioning Pneumatic Conveyors Compressed Air Cement Plant Air Silo

• Part Name: : Material
• Body: : GG 25/ GGG 40/ A 126 WCB/ A 351 CF 8/ CF 8M
• Closure: : A 217 CA 15/ A 351 CF 8/ CF 8M/ B 62 (85/5/5/5)
• Stop Pin: : AISI 304/ AISI 316
• Hing Pin: : AISI 304/ AISI 316
• Spring: : Stainless Steel 316
• Retainer: : Stainless Steel 316
• Seat: : EPDM
• Plate Lug Bearing: : SS 304/ Brass
• Spring Bearing: : SS 304
• Sleeve: : Nitrile Rubber / EPDM

We are offering forging wafer dual plate check valve. Size:2"-40" class:600#-1500# material:carbon steel;stainless steel;duplex steel;bronze;inconel medium:oil;gas;water design&manufacture to api594 face to face to ansi b16.10 ends to ansi b16.5

Double Outlet Type Landing Valve Product code No Description 01 Made in gunmatel 3”NB flanged inlet as per ANSI/IS 1548 02 Made in gunmatel 4” NB flanged inlet as per PN 16   Full Product description : Supported ourselves with proficient amenities, we are readily instrumental in providing an inclusive variety of Double Outlet Type Landing Valve Gunmetal. Our given range is made using best quality raw materials and modern technology. Known for their high performance, hurdle free longer life. Features: Specifically designed Long lasting Reliable Maintenance-free   Material of Construction :we are make a double outlet type landing valve of used Gunmetal S.S

• Material: MS/ CI
• End Connection: Double Flange, Butt Weld
• Power: Manual
• Type: Double Flange
• Features: Ruggedly constructed, Longer functional life, Precise dimensions
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)/Other
• Nominal Pressure: 1.0-1.6 MPa
• Range: 50 mm-1200 mm

Now purchase Double Window Sight Glass at highly affordable prices from us. We are its well-known supplier in the country.We follow pre-defined quality rules to make sure that the offered array of products is as per the exact customers’ demand and need.We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements.Features Easy to install Minimum maintenance Rigid design Flawless finish

• End Connection: SUBPLATE TYPE
• Material: MILD STEEL
• Size: 10
• Country of Origin: Made in India
• Brand: PRISM
• Valve Size: 10
• Pressure: 315 BAR
• Media: Fuel
• Design Type: Seat type valve,with decompression poppet.
• Model Name/Number: 2CIV 10 G03 0
• Pilot Ratio: IN DATA SHEET
• Max Flow: . 80 l / min
• Power: Hydraulic
• I Deal In: New Only

Dual Plate Check Valve, Paper Lamination Plant, Swing Check Valves

Double Offset Disc Butterfly Valve, Metal seat butterfly valve

Double Flanged Butterfly Valves, flanged butterfly valves

DOUBLE FLANGE BFV, LUG TYPE BFV, Double Offset Disc Butterfly Valve

Dual Plate Check Valve, Swing Check Valve, Globe Steam Stop Valve

Dual Plate Check Valve, Ball Valve, wafer swing check valve

Dual Plate Check Valve, Ball Valves, Strainers

Dual Plate Check Valve, Api Gate Valve, Ball Valves, ball valve actuators

Dual Plate Check Valve, gas, Ball Valves, Butterfly Valve