Dual Valve Dealers in Vastral, Ahmedabad

• Country of Origin: India
• Type: Double Union Ball Valve
• Material: Plastics
• Application: Industrial, Machinery, Agriculture
• Color: Grey
• Feature: High Dimensional Accuracy, Honing Raceways, Long Life, Smooth Runnig, High quality pressure
• Brand Name: Flotec
• Pressure: 142psi
• Temperature Of Media: 100
• Material: Pvc
• Color: Dark grey
• Type: Double union
• Brand: Flotec
• Size: 2 , 2.5 ,3 inch

• End Connection: SUBPLATE TYPE
• Material: MILD STEEL
• Size: 10
• Country of Origin: Made in India
• Brand: PRISM
• Valve Size: 10
• Pressure: 315 BAR
• Media: Fuel
• Design Type: Seat type valve,with decompression poppet.
• Model Name/Number: 2CIV 10 G03 0
• Pilot Ratio: IN DATA SHEET
• Max Flow: . 80 l / min
• Power: Hydraulic
• I Deal In: New Only

• Brand Name: Allines
• Pressure Rating: ANSI 125,150,250,300 & PN 25
• Feature: Low pressure drop hence lover energy loss,It weighs about 1/5th weight of conventional valve etc.
• Place of Origin: Ahmedabad  
• Applications: Water,Air,Oil,Gas,Steam or any other fluid
• Size Range: 2” (50 MM) to 24” (600 MM) N.B.
• Packaging: Bulk

Sand Casting Dual Plate Check Valve, offered by us, is widely appreciated for its superior quality, efficient functionality and durable life. Our Sand Casting Dual Plate Check Valve is hydraulically engineered by the experts in strong, light and small size. In addition to this, our Sand Casting Dual Plate Check Valve offers flexible installation in horizontal or vertical line without any special pipe support. Sand Casting Dual Plate Check Valve find application in water pipes, air pipes, gas pipes etc. Design Features : “Dual Plate Check Valve” is an all purpose Check Valve (NRV). The Valves are designed to API 594 and comply with API 598 Valves inspection & testing standard. This design has distinct advantages over conventional Swing Check Valve or any single disc design It weighs about 1/5th weight of conventional valve Salient valve – Water hammer & Slamming almost eliminated Low pressure drop hence lover energy loss Size range : - 2” (50 MM) to 24” (600 MM) N.B. Pressure rating : - ANSI 125,150,250,300 & PN 25 Constructions : Body & Plates : C.I./C.S./S.S./ALLOY STEEL/AL. Bronze to A-216 Gr. WCB, CF8, CF8M, LCB, B.S.1400 AB 2 OR any other alloy as per Buyer’s specifications Hinge & Stop Pin : Stainless Steel or Bayer’s specification Pin retainer : C.S./stainless steel or Bayer’s specification Springs : S.S.-304 / S.S. 316 / Inconnel Seal : Buna –N, Viton –A or metal to Metal End Facing : Plain Face, Raised Face or Ring Joint Facing Technical data : Dimensions as per API-594 expect for ANSI-125 series Hub diameter (A) can be supply to Suit Flange Sizes as per BS / ANSI / DIN/ JIS or any other standard as per Bayer’s Specifications The Valves are also available with Flanged Ends with Wafer Design as well as is long pattern having face to face Dimensions as per BS-1868 / API 6D / ANSI B-16.10 Applications : Water Air Oil Gas Steam or any other fluid

With us, clients can stay assured of the quality of the products as we make use of the first class raw material that is tested on several measures prior to product manufacturing. Therefore, we are reckoned as the best double flanged butterfly valve exporters in India and some other countries. We are appreciated amidst the celebrated names in the sphere of providing an exclusive range that includes double flanged butterfly valve. We ensure that the products reach your destination within the committed timeframe.

We are offering forging wafer dual plate check valve. Size:2"-40" class:600#-1500# material:carbon steel;stainless steel;duplex steel;bronze;inconel medium:oil;gas;water design&manufacture to api594 face to face to ansi b16.10 ends to ansi b16.5

• Material: Cast Iron
• Brand: Honeywell
• Nominal pressure: PN16
• Size: DN50-DN300
• Seal Test pressure: 17 bar
• Shell Test pressure: 24 bar
• Features: Dimensional accuracy, Rust proof, Durable finish standard

• End Connection: FITTED BETWEEN TWO FLANGES
• BODY & DISC MATERIAL: CAST IRON, CARBON STEEL
• SEAT MATERIAL: METAL SEATED, SOFT SEATED.
• DESIGN: DISC TYPE - DUAL PLATE CHECK VALVE.
• PRESSURE RATING CLASS: ASA 125, 150, 300
• SIZE RANGE: 50mm TO 1000mm

• End Connection: Wafer, Lugged, Flanged
• Body: ASTM A216 Gr.WCB, ASTM A217 Gr.CA15,ASTM A351 Gr.CF8,ASTM A351 Gr.CF8M,CF3M
• Disc: ASTM A216 Gr.WCB, ASTM A217 Gr.CA15,ASTM A351 Gr.CF8,ASTM A351 Gr.CF8M,CF3M
• Size: 25 mm to 500 mm
• Seat: Metal to Metal

FFV Dual Plate Check Valves should be installed in horizontal flow with pins Vertical for best performance with Wafer Design, Intigral soft seated with spring action.   Features Up to 75% lighter and significantly smaller than a comparable ANSI or API flanges Close piping and hook-up arrangements with typically 25% smaller Clamp diameter Easier fabrication and installation with no bolt holes to align Typically 40% shorter connection lengths Only 4 bolts to tighten rather than up to 24 on a conventional flange The clamp can be rotated completely round the hub for easy bolt Orientation and tightening Quicker and easier assembly and disassembly,minimizing Maintenance downtime   Applications Petrochemical,Industrial Piping,Power Generation,Onshore,Offshore & subsea pipeline application,Oil and Gas Production.

SALIENT FEATURES Heat and corrosion resistant high chrome alloy trim. Self-aligning flat faced valve, disc and seat remain pressure tight. Carefully lapped flat faces of valve and seat to optical precision, guarantee pressure tightness. Top guided to ensure high discharge capacities. Thus, ensuring the use of a valve of the minimum size for the given duties. As improvements are made from time to time, this specification is subject to alteration without notice. NOTES: CAST IRON BODY. Pressure Upto 13 kg/Cm2 temp. 4280F CAST STEEL BODY. Pressure Upto 40kg/Cm2 temp. 4000C BRONZE BODY. Pressure Upto 17.5 kg/Cm2 temp. 4280F

Now purchase Double Window Sight Glass at highly affordable prices from us. We are its well-known supplier in the country.We follow pre-defined quality rules to make sure that the offered array of products is as per the exact customers’ demand and need.We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements.Features Easy to install Minimum maintenance Rigid design Flawless finish

• Material: MS/ CI
• End Connection: Double Flange, Butt Weld
• Power: Manual
• Type: Double Flange
• Features: Ruggedly constructed, Longer functional life, Precise dimensions
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)/Other
• Nominal Pressure: 1.0-1.6 MPa
• Range: 50 mm-1200 mm

Double hydrant valve Flange Inlet are available in GMSSALUC.I. Double Controlled Hydrant Valves are manufactured in Light DutyMedium Duty & As per IS Heavy Duty.The Best Fire Hydrant Valve

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.   Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.   Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.   This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage a Rotary Feeder   Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.   Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.

• Design Standard: API 594
• Size Range: 2" to 8"
• Rating: ANSI # 125
• End Conncection: Wafer Type
• Sheet: Nitrile / EPDM / Vition
• M.O.C.: Cast Iron to IS 210 GR. FG 200 / Cast Carbon Steel ASTM A 216 GR. WCB

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications. Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure. Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve. This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage aRotary Feeder Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system. Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.  

We are offering dual check valve. Technical specifications : design : disc type – dual plate check valve.seat material : metal seated, soft seated.body material : cast iron, carbon steel (astm a 216 gr. Wcb, forged carbon steel (astm a 105), cf8 (ss 304), cf8m (ss 316), cf3m (ss 316l), ss 202, alloy steel & others.end connection : fitted between two flanges.pressure rating class : asa 125, 150, 300size range : 50mm to 1000mm.

• Part Name: : Material
• Body: : GG 25/ GGG 40/ A 126 WCB/ A 351 CF 8/ CF 8M
• Closure: : A 217 CA 15/ A 351 CF 8/ CF 8M/ B 62 (85/5/5/5)
• Stop Pin: : AISI 304/ AISI 316
• Hing Pin: : AISI 304/ AISI 316
• Spring: : Stainless Steel 316
• Retainer: : Stainless Steel 316
• Seat: : EPDM
• Plate Lug Bearing: : SS 304/ Brass
• Spring Bearing: : SS 304
• Sleeve: : Nitrile Rubber / EPDM

• Brand Name: METALLIC
• Pressure: Low Pressure
• Material: CAST IRON
• Country of Origin: Made in India
• End Connection Type: Flanged
• Media: Air, Water, Gas
• Temperature Of Media: Medium Temperature
• Is It ISO Certified: ISO Certified
• I Deal In: New Only

• Material: WCB
• Brand Name: ELITE
• Valve Size: 2
• Usage/Application: Industrial

• SIZE: 2" TO 20"
• CLASS: 150# / 300# / 400# / 600#
• END: WAFER TYPE / FLANGED
• STANDARD: API 6D / API 594
• FIRE SAFE: API 6FD
• MOC: WCB / CF 8 / CF 8M / CF3 / CF 3M / CN 7M
• OPERATION: NON RETURN VALVE

• Construction :: Investment casted, slim seal, wafer type, double offset disc
• MOC :: WCB / CF8 / CF8M / CF3 / CF3M
• Size Ranges :: 40 NB TO 300 NB
• Design and Mfg Std :: API 609
• Inspection And Testing Std :: API 598
• Face To Face :: API 609 ‘B’
• End Connection :: Wafer type – suitable to fit between two flanges
• Pressure Rating :: ASA 150 #

Double Offset Disc Butterfly Valves are giving extremely high performance at very lower operating torque with some significant features like lower weight, compact design, replaceable seat and easy maintenance. PTFE seat ensures smooth working life under temperature up to 210° centigrade. For higher size, these valves are strongly recommended.

Dual Plate Check Valve, Y Strainer, Triple Duty Valves, suction diffusers

PULP VALVE-DOUBLE GLAND, Double Gland Pulp Valve, GLOBE VALVE, FLANGED END

double flap valve, Rotary Air Lock Valve, rotary air lock feeder

Double Window Sight Glass Valve, Investment Casting Strainer

Double Flanged Butterfly Valves, Lined Butterfly Valve, Lug Butterfly Valve

Dual Plate Check Valve, Dual Plate Check Valve, Dual Plate Check Valve

Dual Plate Check Valve, Ball Valves, Gate Valve, nrv valves