Dutron Products Vatva, Ahmedabad, Gujarat

Specification for MOR Testing Machine. Digital MOR Testing machine having 4 Line LCD Display which shows Actual Load & Time or Extension. Maximum Load & Time of Breaking or Extension. Over Load & ver Travell  safety. Auto reverse or auto stop Facility after complition of test. Software Programme to operate the machine through computer & for the recording of the graph Machine size will be vary as per the requirement.

  Specifications of the Basic Digital Tensile Testing Machine are as below:-1)   Tensile testing machine(Table Top Model) capacity upto      05 kgf to 0-250 kgf.2)   Imported guide rods for vibrationless travell3)   Linear Motion Bearing for friction less travell at high       speed.4)   Over Load safety5)   Over Travell Safety6)   Auto reverse function after complition of test7)   Auto stop function8)   PMDC Gear Motor & Drive for varible speed9)   Unit selection KG, N & KN10) Encoader for High accuracy in Elongation/ Extension11) 4 Line LCD Display Unit12) Last 5 samples readings will be saved in controller13) Single load cell & Double load cell both the facility  are available as per party’s requirement.

1)    Computerized Tensile Testing Machine having LCD Display unit which shows Load , Elongation,  Last samples Maximum Load, Elongation at the time of auto reverse. Controller can save  last 5 samples readings  .2)    Tensile, Comprassive, Flexural, Shear, Bend, Bond, peel ,etc test can be carried out without making any change in the panel.3)    Speed variation through AC/DC Variable Drive , Stepper & Servo Control  4)    The accuracy of the machine is within its tolerance limit of + or – 1%.5)    Force Measurement will be available  in Kg ,Newton, KN & MPA.6)    Elongation through Encoader  for high accuracy .7)    Auto Reverse  & Auto Break facility.8)    Over load & over travel facility  are provided in controller.9)    Computer Connection Through 9 pin serial Port( RS 232)10)    Over load  & Over Travel safety also provided.11)    Speed Control through software programme.12)    Software can calculate the results as per below:-  •    Maximum Load•    Elongation at maximum load•    Elongation percentage at maximum Load•    Tensile Strength at maximum Load•    Break load•    Elongation at Break Load•    Elongation percentage at break load•    Tensile strength at break load•    Yield Load•    Elongation at Yield Load•    Elongation percentage at Yield load•    Tensile strength at Yield load•    Modulus of Elasticity1.    You can see results in  any  unit  KG/cm2, KG/mm2, N/cm2, N/mm2, KN/cm2, KN/mm2 & MPA. Software will calculate all the data as per the unit selection.

Specification for above Computerized  flexural & Compression testingmachine.:-1) Computerized  compression & flexural testing machine having 4line LCD display unit which shows Actual Load, ActualTravell Distance, Maximum Load & Travell at MaximumLoad2) Auto stop & Auto reverse facility3) Over Load & Over travell Facility4) Digital display unit can save last 5 samples readings5) you can do compression & flexural tests in the same   machine6) Single & Double Load cell available for multiple testing    capacities7) Imported guide rods & Linear Motion Bearings for    friction less and vibration less travell.8) Distance calculation through Encoader for high accuracy.9) Unit selection KG, N & KN10) AC/DC Vareable drive for speed variation11) Software programme which show  the graph for Load V/S      Elongation.12) Speed control through Software Programme.  

Specifications of the Basic Digital Tensile Testing machine are as below:- Tensile testing machine(Table Top Model) capacity upto 2500 kgf to 0-5000 kgf. Imported guide rods for vibrationless travell Linear Motion Bearing for friction less travell at high speed. Over Load safety Over Travell Safety Auto reverse function after complition of test Auto stop function Unit selection KG, N & KN 4 Line LCD Display Unit Last 5 samples readings will be saved in controller Single load cell & Double load cell both the facility are available as per party’s requirement.