Back Back
effluent recycling system
Get Price Quote
effluent recycling system, A ZLD system is a treatment process which is used to remove all the liquid waste from a system. The goal of ZLD water treatment is to reduce wastewater economically and produce potable water that is fit for normal use. Zero liquid discharge system is an advanced treatment method that comprises ultrafiltration, reverse osmosis, evaporation and fractional electro deionization. And we are a well-known supplier of ZLD systems.
Waste Water Treatment Plant
Get Price Quote
1 Piece (MOQ)
Best Deals from Effluent Treatment Plant
Effluent Water Treatment Plant
1,000,000 - 40,000,000 Per Set
1 Set (MOQ)
Zero Discharge System
20,000 Per Piece
5 Piece(s) (MOQ)
We are amidst the dependable Manufacturers, Exporters and Suppliers of the Zero Discharge System. The Zero Discharge System evaporates water from Pretreated Effluent in almost the same way as thermal evaporators, employing the principle of diffusion at normal temperature. To recapitulate the basic aspects of the novel design : Braj Projects Pvt.Ltd. design basically differs from conventional evaporators in the underlying principle; the former uses heat to evaporate water, whereas the later (Braj Projects Pvt.Ltd.'s design) employs the natural phenomenon of diffusion of water which does not require heat. The natural process of diffusion is as such slow, but can be greatly enhanced by, large inter facial area between air and water, turbulence, finer particle size of water and large air to water ratio. It has been proven scientifically in the highly reputed universities and renowned institutions in the West that at sub-micron size of the water particles in the normal atmosphere, the natural process of evaporation, called diffusional evaporation, ensures that it is completely vaporizes before it hits the ground, if released at sufficient height. In order to utilize this well-proven principle for practical and effective evaporation of effluent into water in the atmosphere, the effluent has to be adequately stripped off all its dissolved organic and inorganic contents beforehand, besides removal of turbidity, suspended solids etc. This process of natural evaporation would be dependent on the atmospheric conditions like humidity, wind speed, temperature etc and therefore should be harnessed and designed for the adverse combinations of governing parameters so that at all other time higher evaporation would occur. Braj Projects Pvt.Ltd. does not claim that it has Invented Natural Evaporation By Diffusion, but it does claim that it has harnessed this principle for practical, effective evaporation of effluent into water by perhaps more user-friendly method suitable for the Indian conditions With above background, it becomes clear that the effluent has to be properly pretreated before it is pumped into Braj Projects Pvt.Ltd.'s ZDS involving; equalization, pH control, removal of volatile organics, removal of suspended solids and turbidity, and lastly adequate removal of dissolved impurities. There are basically two types of dissolved impurities in the effluent, organic and inorganic, manifesting themselves as COD, BOD,TOC, etc. and TDS. Firstly, the effluent has to be passed through a packed bed of activated carbon, granular form, with app surface area about 80-100sq meter per gram. It is well known that activated carbon of good quality possesses extremely good adsorptive for most of the organic impurities present in the textile effluents. Therefore, after passage thru carbon bed ,most of the dissolved organics of the effluent would be removed, with optimum contact time and sufficient depth of the bed, say,.5m to 1.0meter and dia of about 0.5 to 0.75m.The carbon bed as usual would have distributors, supporting plate, mild steel shell, inlet and outlet and so on. After removal of organics in the carbon bed of adequate quantity, the effluent is passed through a mixed bed of anionic and cationic resins which are well known to remove inorganic salts from the effluent by the ion exchange process. This would be also made from mild steel shell lined with epoxy to withstand corrosion by the effluent. It would be a packed bed with usual connections like inlet, outlet, distributor etc. The anionic and cationic resins would be in the form of spherical particles packed to sufficient depth and adequate residence time. Both the carbon granules and resins are available in India and have been used in the industry for effluent/water treatment with a high degree of success over the last several decades. Their designs have been standardized in our country. The Overall Picture of Our ZDS Is As Follows Equalization VOC removal by vigorous aeration (optional in the textile effluents) pH control Removal of suspended and turbid particles in a multimedia filter Removal of dissolved organics by the activated granular carbon bed Removal of highly concentrated portion of waste water as recycled stream in effluent storage tank or sludge drying beds Removal of dissolved inorganic(TDS) in a packed bed of ion exchange resins, anionic and cationic both, and then pumping the so pretreated effluent into our ZDS along with compressed air through diffuser modules mounted at 50-60 feet elevation. Typical Characteristics Of The Equalized Textile Effluent pH : 6.5 -8.5 S S : 150-400ppm C O D : 800-3000ppm B O D : 200-450ppm Color : Moderate Oil and Grease : 5-30 ppm Ammoniacal Nitrogen : 50-150 ppm TDS : 5000-15000 ppm Toxicity : Not detected Typical Characteristics of the Pretreated Effluent before Zero Discharge System pH : 6.5 -7.5 S S : 10-500 ppm COD : 70-50,000 ppm BOD : 20-3000 ppm Color : Almost colorless Oil &Grease : 2-100 ppm TDS : 100-2, 00,000 ppm The packed beds of activated carbon and ion exchange resins are cylindrical, vertical columns with valves, pressure gauges, drains, level indicators, opening lids and man holes for cleaning and are self -supporting structures of about 2-3 feet diameter and 4-6 feet cylindrical heights, made from mild steel of about 4-6 mm plate and coated with epoxy paint. The present study on a pilot plant at Braj Projects Pvt.Ltd. over two years and exhaustive study of the commercial plant at a local chemical industry over the last 1.5 years have shown that there are no adverse effects of any kind either on the local climate or human beings or plantations in the vicinity of the ZDS plant as well as in the long ranges by the emissions from the ZDS. This is on the expected line technically also, because what is being discharged from the ZDS is water vapor well mixed with large amount of air and that too at highly elevated level of 50-60 feet from the ground. If we compare this with the discharges of the greenhouse gases from the boilers, driers, thermic fluid heaters and even multiple effect evaporators already approved by the regulatory authorities emitting vapors without mixing with air or the much -touted incinerators' gaseous emissions comprising carbon dioxide, carbon monoxide, heat and toxic substances as byproducts of combustion of the fossil fuels used for generation of heat/steam. This method of zero discharge is superior and much more eco-friendly on equivalent basis. Needless to mention, that like all other novel technologies emerging in the horizon in the global environmental scenario, the ZDS is also not cent per cent perfect, it does have a few limitations, however, if the industry has to opt for a zero discharge system that is very near to the sustainable, practical, cost effective and eco-friendly method of ensuring no liquid discharge. Braj Projects Pvt.Ltd.'s ZDS provides and tries to fill in the vacuum amongst the plethora of pseudo- zero discharge systems available in the Indian market. During the developmental process of the Zero Discharge System Braj Projects Pvt.Ltd. learnt that in one of the highly developed countries, such systems of very large capacities at industrial scale have been operating successfully for over 10-15 years. Now Braj Projects Pvt.Ltd. also has gone up to a full-fledged commercial plant employing this novel concept and it is of the opinion, based on exhaustive trials so far, that the system is techno-economically viable and sustainable remedy to the Zero Discharge compliance problem of the industry has ultimately arrived on the Indian horizon. Outcome of the Zero Discharge system Treated trade effluent disposal problem of a land locked industry will be solved on a sustainable way. Compliance of Zero Discharge norm will be achieved by the industry. Occasional underground pollution of the water strata will be solved. Price Range : Ranging from Rs. 5 Lakhs to 2 Crore
Effluent Treatment Plant
Get Price Quote
Industrial wastewater required various chemical and biological tretment, we design and manufacture various Effluent treatment plants suitable for dairy industry, steel industy, casting industry, chemical and pharmasutical industry as well as textile industy.
0.0
View Profile
MBBR Based Effluent Treatment Plant
150,000 - 700,000 Per piece
MBBR (Moving Bed Biofilm Reactor) is a type of wastewater treatment technology that uses a combination of biological and physical processes to remove organic and inorganic pollutants from wastewater. In an MBBR-based effluent treatment plant, wastewater is passed through a reactor tank containing suspended carriers on which microorganisms grow and form a biofilm.
0.0
View Profile
Zero Liquid Discharge Plant
100,000 - 150,000 Per ton
0.0
View Profile
sludge dewatering machine
Get Price Quote
To fulfill the dream of make in India, and focusing on independent technology innovation. Under the cooperation with Tongji University, TECHASE have successfully developed the new generation of sludge dewatering technology -multi-plate screw press, a screw type sludge dehydrator that is much more advanced in very aspects than belt presses, centrifuges, plate-and-frame filter presses, etc. It features clogging-free, wide range of applications, low energy consumption, simple operation & maintenance.Details The Multi-Plate Screw Press utilizes the dewatering principles of force- water homo direction thin layer dewatering, proper pressure and extension of the sludge dewatering path. More advanced than the traditional dewatering equipment which are easily blocked, unsuitable for low concentrated sludge and Oily sludge, of high consumption and difficult to operate, will eliminate these problems and of higher efficiency and power saving The equipment is controlled by the electric control cabinet, allows automatic continuous operation of sludge flocculation, thickening, dewatering and the filtrate discharge.
Effluent Treatment Plant
Get Price Quote
Effluent Treatment Plant (ETP) is used for treating the industrial waste water that has been contaminated in some way by industrial or commercial activities. Our Effluent Treatment Plant effectively treats the waste water, thus making it harmless and reusable for other processes. There are various types of Effluent Treatment Plant such as sewage treatment plant (STP), membrane, sequencing batch reactor (SBR), conventional effluent treatment plant, bio reactor (MBR), moving bed bio-film reactor (MBBR), rotating biological contractor (RBC), aerated lagoon, anaerobic digester, up flow anaerobic sludge blanket reactors, anaerobic lagoon, etc.
0.0
View Profile
Effluent Treatment Plant
550,000 Per Set
As per your requirement, we are very much pleased to submit our Techno – Commercial proposal for Water Treatment System incorporating Latest based 5 kld ETP PLANT system as per the attached annexure
0.0
View Profile
Effluent Treatment Plants
500,000 - 10,000,000 Per piece
1 Number (MOQ)
etp plant
300,000 - 800,000 Per piece
1 Nos (MOQ)
Effluent Treatment Plant
Get Price Quote
0.0
View Profile
Sewage Water Membrane
Get Price Quote
High Chemical Resistance & High Mechanical Strength PVDF (polyvinylidene fluoride) gives the membrane superior physical strength and chemical resistance Easy Maintenance & High Permeability Flat Sheet “MEMBRAY” Delivers Smart MBR Process High Water Permeability & High-quality Effluent Flat sheet membrane offers superior in fouling resistance compared with hollow fiber membrane Flat sheet membrane does not require a backwash system to operate reliably Simple module design with flat sheet membrane enables easy maintenance and cost savings
0.0
View Profile
Effluent Water Treatment Plant
Get Price Quote
We are known for the supply of high quality Effluent Water Treatment Plants. Effluent Water Treatment Plants are required in different industries to purify Waste Water from chemical and biological waste. The Effluent Water Treatment Plant facilitates production of disposable effluent without causing harm to the environment. Also, Effluent Water Treatment Plant does not cause pollution. We also offer customized Effluent Water Treatment Plants to suit to any different need of our clients. They can avail Effluent Water Treatment Plant from us at very reasonable prices. Features : High performance Durable Non-corrosive
Bag Sludge Dewatering Machine
50,000 - 150,000 Per Piece
1 Piece(s) (MOQ)
0.0
View Profile
etp plant
450,000 - 4,750,000 Per SET
0.0
View Profile
Effluent Treatment Plant
58,000 - 765,000 Per
We are mfg. Twin lobe air blower for etp stp plant ,.our unit located in ahmedabad . Our leading consultants is..chokhavatia asscotes... Murali sesh enviro etx
Waste Water Treatment Plant
1,000,000 - 10,000,000 Per piece
1 P (MOQ)
0.0
View Profile
zero liquid discharge system
Get Price Quote
From the sourcing of raw material till the final dispatch, our quality auditors keep a stern eye on every sage. Our dedicated staff and quality auditors take care of the complete manufacturing of the products, even the raw material sourced at the initial stages are checked on the grounds of quality.
0.0
View Profile
Effluent Treatment Plant
400,000 Per Piece
01 Piece (MOQ)
0.0
View Profile
Effluent Treatment Plant
100,000 Per Piece
1 Piece (MOQ)
0.0
View Profile
Packaged Effluent Treatment Plant
Get Price Quote
Packaged sewage treatment plant offers a packaged, ready-to-use system which is an integration of subsystems such as screening, aeration, equalization of the water flow, sludge digestion, and disinfection of effluent impurities. Since it is a fully-assembled system, they are easy to install and use. Made from high-quality reinforced carbon steel, the package sewage treatment plant is made for long-lasting performance. We make sure that only high-strength material and the interior and exterior surfaces are coated with an industry-class epoxy coating. It makes it ideal for wastewater treatment.
0.0
View Profile
Effluent Treatment Plant & Oil Skimmer
Get Price Quote
Effluent Treatment Plant (ETP) is a highly efficient & compact design plant. The continuous research & development of this product has enabled it to become more powerful and a convenient energy saving unit. The product is made under strict norms as directed by the PCB. On the other hand, Oil Skimmer is based on the multi type skimming process. The oil Grabber's belt attracts oil and other hydrocarbon liquids from the fluid's surface, where the contaminants are then processes for the finishing product. Both the products are available at a reasonable cost.
Effluent Treatment Plants Indian Trade Bird
Get Price Quote
1 Pair (MOQ)
Effluent Treatment Plants Indian Trade Bird Provide Effluent Treatment Plant manufacturers, suppliers, and exporters in India. We offer the best quality Effluent Treatment Plant to meet our customer requirements. Effluent Treatment Plants are fully automatic. These plants are reliable and cost-effective.
0.0
View Profile
etp plant
Get Price Quote
ETP plant of the effluents generated from washing ghats of the members of the association at Bhat for 30 MLD. The present CETP is put up for 30 MLD. The inlet COD to the CETP is 1500 mgI to 1800 mgI.
0.0
View Profile
Zero Liquid Discharge Plants
Get Price Quote
1 Set(s) (MOQ)
All most all process industries use a lot of water and produce liquid wastes containing many different chemicals which may prove harmful to man kind, aquatic life, etc. Earlier this waste water was thrown into rivers, seas etc without treating. Now government has laid stringent rules on the disposing off liquid effluent produced by the industries. shreyans water engg. Provides zero liquid discharge plants to industries. They are combination of evaporators and dryers. Liquid/water gets evaporated and solid product is produced which can be thrown, buried or sold or reused as per product value.
0.0
View Profile
etp plants
100,000 - 325,000 Per Piece
0.0
View Profile
Effluent Treatment Plant
Get Price Quote
01 Piece(s) (MOQ)
We are offering effluent treatment plant. the primary application of these effluent treatment plants is for recycling waste water for reuse quality : a1 grade price : competitive delivery : within 3 working days available in sell as well as on rent bases.
0.0
View Profile
sludge dewatering machine
650,000 Per Piece
1 Piece (MOQ)
0.0
View Profile
Filter by Localities
Post Free Ad