Eie Instruments Pvt Ltd Ellisbridge, Ahmedabad, Gujarat

Power : Electronic

Brand Name : EIE

Power : Electronic

Brand Name : EIE

Application : Cement Testing Machine

Features: Hassle free functioning Corrosion resistance Accurate outcome Easy to use  Compliance with following International Standards IP 124, ASTM D665, ASTM D3603   Brief construction details Rectangular reservoir (Inner chamber) constructed of 16 SWG, stainless steel with drain cock. Outer body made of 20 SWG, CRCA sheet duly powder coated. Thermal insulation provided in between the walls to prevent loss of temperature. Constant temperature oil bath is fitted with motorized stirrer  to maintain temperature at 60 °C ± 0.5 °C Oil immersion heaters are fitted to dissipate uniform heating. Temperature, speed and time are digitally indicated. Microprocessor based PID temperature controller with two  displays for set and process value. PT-100 sensor with 0.1 °C resolution on digital display. The bath can accommodate at least four test samples at a time with combined motor for each position Motor is mounted on ball bearing, driven by belts and pulleys. Supplied complete with 4 Nos test Beaker (400 ml) of Borosilicate glass with dimension as per ASTM standard. The test beakers are securely held in the bath by spring clips and are fitted with acrylic covers, dimension as per ASTM standard.   Details about Timer & Stirrer The unit is having motorized stirrer with digital RPM meter with proximity sensor to monitor the stirring speed. Stirrer rotates on its longitudinal axis at 1000 ± 50 rpm. Stirrer will be made of stainless steel as pr standard dimension given in the method. Test rod is also made of steel conforming to grade 10180 of specs A 108 BS 970 Part 1:1983-070M20 with dimension as per standard. In-built timer is provided in apparatus which stops the stirrer at pre-set time.   Technical Specifications Temperature range    : Ambient to 100 °C  ± 0.5 °C Stirrer Speed            : Up to 1000 rpm, ± 50 revolution/minute Power supply           : 230 Volt + 10 %, 1 phase, 50 Hz   Following accessories are supplied along with the equipment 1)    Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each)  :  3 numbers 2)    Steel Test Specimen                                  : 4 numbers 3)    Test Beakers (400ml) with covers           :4 numbers 4)    Beaker cover (PTFE) for ASTM D665      : 4 Numbers 5)    Teflon holder (PTFE) for D665                 :4Numbers 6)    Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 Number

Power : Electronic, 230 V, 50 Hz, Single Phase, AC Supply

Brand Name : EIE

Application : Bitumen Marshall stability test

This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after preset number of blows has been completed. The Compactor gives Uniformly and accurately compacted marshal moulds for reliable testing. General Descripation & SpecificationIt is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds. It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. with a free fall of 457 mm. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase. Optional AccesoriesDigital Display electronic counter

Power : Electronic

Power : Electronic

Brand Name : EIE

Used for determination of Kinematic and intrinsic viscosity of fuels, lubricants & petrochem raw materials at constant temperatures in accordance with ASTM D 445 and other equivalent methods. Available in two versions, to work at above ambient temperature and below ambient temperature. General Descripation & Specifications :Double walled, outer chamber made of G.I. - powder coated, with removable toughened Glass window panel, inner chamber made of S. S, FHP motorised stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor. Temperature range from 5° C above ambient to 100° C., Control accuracy ± 0.1°C. Below ambient Viscosity Baths are fitted with Refrigeration system (Temperature Range : 10°C to 100°C). The Baths can accommodate 2 / 4 / 8 Viscometers with varying tank volumes. Stainless steel bath Temperature controller (Thermostatic/Digital) Immersion electric heater Constant speed Pump cum stirrer Carriage holding up to three standard briquette moulds Electric motor with gear mechanism Stainless steel scale and pointer Control Panel Reverse Flow ViscometerThe viscometer is made of clear borosilicate glass free from visible defects. All glass tubing used in the construction of a single viscometer is of the same composition and the finished instrument is thoroughly annealed. The design and details of the viscometer are given at side. The size, approximate constant and Kinematic Viscosity is as per table.

Brand Name : EIE

Power : Electronic

Shaping Mode : Other

Brand Name : EIE

Type : Other

Door Type : Other

Defrost Type : Other

Model Number : Horizontal Deep Freezer

Condition : New

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime   This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

Usage : Cement Testing Machine

Power : Electronic

Consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The balance supplied may also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the laboratory 

Brand Name : EIE

Power : 230 Volts

Power Source : Electric

Voltage : 220-240v

Frequency : 50-60 Hz

Usage : Aggregate Testing Equipment

Power : Hydraulic

Brand Name : EIE