Electric Pumps Dealers in Hathijan, Ahmedabad

• Maximum Head: 110 m
• Minimum Head: 5 m
• Installation Position: Vertical/Horrizontal
• Shaft Seal Type: Mechanical seal
• Maximum Drive Rating: 186 kW / 250 HP
• Type of Installation: Stationary
• Maximum Flow Rate: 1500 m³/h
• Minimum Flow Rate: 20 m³/h
• Speed of Rotation: 2900/ 1400 / 950 revolutions/min
• Free Passage (solid Handeling): 20 mm
• Type of Bearing: Bush Bearings
• Drive Frequency: 50 Hz / 60 Hz

• Brand: VGT INDIA
• Tank Capacity: 16/20 Liters
• Pump: Single Pump
• Power Sources: Manual
• Net Weight: 2.6KGS / Gross
• Weight: 3.KGS
• Packing Size: 36X18.5X51cm

Single Double - Chamber Vacuum spary thanks are used for calibrating and cooling of RPVC and HDPE pipes in vacuum sizing.   Standard Features : Tank with Mild Steel construction Mechanical seal spray pump with high head and high flow rate Mechanical seal vacuum pump Manual longitudinal adjustment on rail Precise Water level control system with visual manometer Water temperature control with thermostat and solenoid valve Dual transparent chilled water inlet filter system for cleaning during operation Height and side manual adjustment Appropriate working platform with aluminium chequred plate Common drain header with 4” x 2nos. Connection 1.5” inlet connedtion Easily cleanable spray nozzles Optional Features : Tank with Stainless Steel contruction Adjustable spray nozzles pipes (above HVT-250 model) Motorized Longitudinal adjustment on rail All piping including spray pipe with stainless steel Insulation on outer side of the tank Special imported spray nozzles Pipe support with central height adjustment Dual disc type water filter in spray pumps with 200m mesh (manual back flushing) Glycerin filled pressure gauge on disc type water filter to see blockage of filter

Our CAPIUS brand Bitumen sprayers, gives unbroken and specify quantity of bitumen or emulsion. These units can be supplied as a module to suit mounting on customer's truck chassis or can be supplied completely along with standard truck chassis. The unit has a built in heating system with a high capacity imported burner to heat the bitumen to the required temperature. Various fuel options as well as burner options are offered on specific requests. The Insulated Storage tank clad with Industrial gauge steel sheets built strictly to Industrial codes for storing, handling and transportation of Bitumen. The cladding is optionally available in a wide range of options ranging from Galvanized, Aluminium or Stainless steel sheets. A unique pressure cleaning system is a standard, which cleans the system after use and avoids blockages at the end of days work. Each unit comes loaded with a speed detection & driver control system, air compressor, diesel engine, High capacity positive displacement internal gear type asphalt pump, remote control station, hand spraying attachment. The horizontally folding spray bar is supplied with a basic width of 2.4 Meter extendable up to 4.2 Meter. The Fully circulating spray bar can deliver bitumen at pressures ranging from 0- 6 kg/sq m. All units are supplied with an inbuilt bitumen charging / loading system. The bar is pneumatically operated and easily adjustable. Complete range of Truck Mounted Bitumen Sprayer models with rated Capacities of 3000 to 12000 Litres. Complete range of Trolley Mounted Bitumen / Emulsion Sprayer models with rated Capacities of 500 to 3000 Litres. .Salient Features Fully - Insulated tank Bitumen tank cladded with S.S. / G.I. sheet with Cera / Galss Wool. Efficient air cooled diesel engine and positive displacement gear pump with lower fuel comsumption. Designed as to suit standard truck chassis. High efficiency heating system. Safe and ease of operation. Foldable Spraybar Hand spray bar. Unique pressure cleaning system. Suitable for bitumen emulsion. The Bitumen Sprayer consists of Fully Insulated (Galvenised / S.S. Sheet) bitumen tank fitted with automatic burner for eating the bitumen at required temperature. Bitumen Pumping system comprising of positive displacement gear type bitumen pump, bitumen lines and valves. 25 H.P. Air cooled two cylinder Engine. Air Compressor. Foldable spray bar with basic width 2.5 mtrs. and extendable upto 4.2 mtrs. is fitted with pneumatically operated and easily adjustable nozzles placed at standard pitch of 225 mm. Spray bar delivers bitumen at pressure ranging from 0 - 6 kg/sqm Manual hand spraying attachment. Controls: The spraying system incorporates some of the best controls in terms of automation and operation as well as maintenance making the quipment very rugged, easy to use & maintain. Theautomation provided is based on the parameters of asphalt required per unit area for a given job and the required flow of asphalt is controlled automatically based on the speed of the truck.

Rotational Moulds India's No. 1 Manufacturer Jaljog Rotomould is one of the leading experts in manufacturing quality molds for rotational molding.  We have sound industry knowledge and expertise in creating different kinds and sizes of molds.  

• Application: Industrial
• Pressure: 3 Bar
• Material: PVC
• Thread Size: 1/8" BSPT
• Brand Name: Vallabh
• Country of Origin: Made in India

Perfect Engineers is engaged in manufacturing & supplying a best quality bitumen sprayer. The word itself suggests spraying the bitumen. The machine has unique functionality & able to spray the bitumen in a uniform way, No part of the road sprayed is over or under. The features of the machine are as under   We are providing fully insulated tank in attachment with bitumen sprayer which are capable of high performing oil heating   Along with product we are also supplying air cooled diesel engine and positive displacement gear pump. The spray bar is such that it is having the free & full flow of circulation To ease the spraying operation we are providing platform with hood for operator To make the system easy & clean we have made this product with simple pressure along with the cleaning system To know the desired result & status we supply digital speed indicator along with machine To make the moisture separate we are providing separator for clean & dry air.

With the aid of modern storage facility and diligent professionals, we are capable to fulfill quick and voluminous requirements of the clients. Also, we ensure complete safety of the stored products. Being a client-centric firm, we are dedicatedly involved in making available quality Spray Nozzles.

• Condition: New
• Charge: to Charge 6 Vdc Battery
• Voltage: Input Voltage 230 A.c. 50 Cycle Out Put Voltage 6 V Dc
• Weight: 430gm
• Size: 5’x3. 75’’x2.75’
• Colour: Multi Colour

• Application: Constructional,Bitumen Spraying
• Feature: Hassle free performance, Heat resistance , Durability
• Model Name/Number: QBS 25
• Capacity: 2500 L
• Air Pressure: 10 bar
• Automation Grade: Semi-Automatic
• Tank Material: MS Plate
• Fuel Type: Diesel

Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Submersible Pump Motor. Our payment procedure is not only easy but also safe ensuring your long-term reliance upon us. Whether it is online payment procedure, cash, bank deposits or others, we are here to guide you throughout the process.   Feature : 0.5 hp Copar rotor

• Color: black
• Product Name: Sprayer
• Usage: Road Construction

Bitumen Sprayer

• Voltage: 230 VAC
• Usage/Application: Industrial
• Frequency: 50 Hz
• Max Flow Rate: 100 LPH
• Brand: EMEC/ XEED/ EXAT
• Power Source: Electric

• Material: SS
• Usage/Application: Hydro Testing of Jobs,Vessels,Pipe Line,Etc
• Automation Grade: Semi-Automatic
• Features: Robust Design

• Brand Name: SAHARA
• Material: Steel
• Finishing: Polished
• Color: Black
• Application: Cutting Use
• Length: 10-15inch
• Feature: Corrosion Proof
• Type: Hand Sickle
• Country of Origin: India

Khurpa sickle use for weeding purpose also for cutting branches.

• Disinfection Tank: Storage Capacity 30 to 40 Liters having Low Level Indicator
• Overall Size (L x W x H): 6.0 Ft x 4.0’ Ft x 7.9 Ft
• Working Voltage: 1 Ph. 230 V AC ± 10 %
• Material for Chamber: Mild Steel Sheet of 14 to 18 SWG Tks with Powder Coating
• Working Environment: Ambient
• Rain Protective: Tunnel Chamber. Suitable for Indoor Operation (open Access Entry are Not Rain Protected)
• Compartment Lengths: Hand Sanitizing – 3.5 Ft x 2.9 Ft & Body Sanitizing – 4.0 Ft x 3.3 Ft
• Spraying Method: By 60 Deg 4 to 6 Ss Nozzles with Adjustable Delay as Required
• Nozzles Spray Isolated: PVC Curtain at Entry & Exit of Disinfecting Chamber
• Disinfection Type: Any Water Based Diluted Solution. (Not in our scope of Supply)
• Hand Disinfection Type: Automatic Non-Contact Disposable Disinfectant
• Sensor at Entry Point: 16” to 24” As person enters the tunnel it will activate operations
• Digital Counter: 12” to 15” to count no. of person entering in Disinfecting Tunnel
• Tunnel Lights: LED based, 220V AC Light with for Spray Area. LED based
• Movability: 04 Nos Nylon Rubber Coated Wheel for ease Transportation
• Stairs Case: Folding Aluminum Chequerd Plate Step at Entry & Exit.

  We are one of the top most company of the principal Trolley Mounted Sprayermanufacturers in India. Our Trolley Mounted Bitumen Sprayer is highly appreciated due to their unmatched quality and performance on a high scale. Clients not only from national but international markets are giving orders for trolley mounted sprayer. The raw materials that we use for the manufacturing of trolley mounted sprayer are of the best quality and acquired from genuine dealer. They ensure high durability and resistance in various unfavorable conditions. We provide our trolley mounted sprayer on a large scale to domestic markets.  

Specification Power range 2.2kW – 11 kW (3HP – 15HP) Speed 2880 RPM Version 380 – 415V, Three Phase, 50 Hz, A.C. Supply Maximum total head 256 meter (25.6 bar) Maximum flow rate 43200 LPH (43.2 M3 / Hr) Nominal outlet size in inches 2, 2 ½, 3 Maximum outer diameter in mm 145 Direction of Rotation Clockwise from driving end. Type of duty S1 (Continuous) Method of starting Three Phase, DOL up to 5.5 kW, SD up to 26 kW. Maximum starts per hour 12 times Features • SS 410 grade stainless steel stage casings and impellers in radial flow pumps. • 30 Feet head per stage in all models. • Silver brazed rotor. • Dynamically balanced rotating parts. • Designed for extensive voltage fluctuations • Carbon and s.s-410 thrust bearing Application • Submersible Pump For water supply. • Water Pump For irrigation. • Submersible Pump For civil and industrial applications. • Water Pump For firefighting application. MATERIAL OF CONSTRUCITON OF MOTOR Part Name Material Upper and Lower Housing Cast Iron Stator Shell Stainless Steel 410 Shaft Stainless Steel 410 & EN 9 with 410 Stainless Steel bushes. Journal Bushes Leaded Bronze Thrust Assembly Stainless Steel 410 and Graphite Carbon MATERIAL OF CONSTRUCTION OF PUMP Part Name Material Check Valve housing CI Check Valve Seat Nitrile Butyls Rubber Diffuser Chamber Cast Iron Impeller Stainless Steel & CI Diffuser Modified in Cast Iron Suction Inter Connector CI Pump Shaft SS 410 Cable Guard SS 410 Coupling SS 410

• Application: Perfumery, Mist Spray, Cologne, Glass Cleaner. Formally known as, Mist Spray Pump also.
• Features: 100% Virgin Plastics, 100% Leakproof, Easy to Use, Highly Durable, Impeccable Finish, Elegant Design .
• Colors: All attractive colors

Non-clogging type Poly-carbonate nozzles having stainless still orifice dome and fitted by using S.S clamps. (clamp on type arrangement)

In India, where agriculture is the base of the economy, though till date many of the area where land is very fertile, but due to the unavailability of the Electric supply Irrigation is almost impossible or very costly. To overcome this problem of the farmer we are introducing our solar water pumping system at very affordable cost with high reliability. Solar water pumps are specially designed to lift water for irrigation, horticulture farms, gardens, domestic use, drinking and other similar applications.Inbuilt MPPT tracking facility to get maximum power output from the solar Array. Higher Efficiency Higher life cycle Dry Running Protection Higher Temperature Protection Over voltage protection Under voltage protection Over Load Protection High Durable and Reliable

FLOWCHEM ENGINEERING PVT. LTD., the pioneer and leading manufacturer company of wide range of industrial barrel pumps specially designed and engineered to meet the need of today’s fast paced industry, is certified for Quality Management System ISO 9001. The important feature of the pump starts with its unique PUMP TUBE and AXIAL VANE IMPELLER. Conveniently located on the top is on-off switch for easy control. The Rugged Motor is designed with large handle grip to ensure suitable bulky rubber gloves. Pump tubes are interchangeable and easily connected or disconnected to the motor by means of Grip Collar Nut. Accessories like Band Flow Regulator and Braided Vinyl Hose are also available. The high Volume Barrel Transfer Pump is suitable for transfer of SOLVENTS, ACIDS, ALKALIS, PETROLEUM PRODUCTS, etc from Barrels, Carboys and Tanks. Available in Chemical Resistant Anticorrosive parts like PP, SS316, and PTFE etc. with High power motor for Viscous Fluid and High Heads, Air Booster Pumps are available for the highly viscous liquids and very high heads.

CD(X)- 2CDX(L) Motor-Driven centrifugal pumps in AISI 304 and AISI 316   Single and twin impeller motor driven centrifugal pumps with AISI 304 stainless steel hydraulic parts particularly suitable for domestic water boosting, small-scale garden watering, washing, water treatment, cooling tower and handling clean water in general.   Technical Specifications ·         Maximum working pressure : 8 bar ·         Maximum liquid temperature  :   60oC for CD(X) 70/05 – 70/07 – 90/10 – 2CDX 60oC for the rest of the range CD(X) 110oC in H-HS-HW-HSW version ·         Capacity up to 15 m3/hr                     ·         Total Head up to 71.5 m

we have marked a distinct position in the domain by manufacturing and supplying the finest quality bitumen Sprayer in Ahmedabad, India. The Bitumen Sprayer provided by us is manufactured at our well-equipped production unit with finest quality materials. Vinayak road equipment design for uniform spraying of Bitumen before the laying for hot mix asphalt, batch mix plant, drum mix plant etc. The offered Sprayer is operating and maintenance is easy and does not require skilled labor.  Bitumen sprayer is also known as Bitumen pressure Distributors. The offered product is also an one of the important construction equipment for road construction. Apart from this offered Bitumen Sprayer is made available in various technical specifications at reasonable rates. Features High efficiency sprayer Easy to operate Chassis and linkage holder are entirely made of steel Heavy duty chassis and structure Digital speed indicator Hand spray system Low operating cost Low maintenance

Electronically-Mechanically Acutated Diaphrgm,M.O.C - PP, PVC, PVDF, SS 316,Maximum Flow: 12 LPH,Maximum Pressure: 10 kgcm2,Low Power Consumption,For higher capacity, multiplexing can be done