Electric Actuators Dealers in Narol, Ahmedabad

• Type: Electric Actuators
• Material: Carbon Steel
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Yellow
• Pattern: Plain
• Power: Electronic
• Pressure: High Pressure, Low Pressure, Medium Pressure

We make available the Single Phase Quarter Turn Electrical Actuator used for the fabrication of Valves. The Electrical Actuator we offer is widely used in the Chemical Industry, Petroleum Industry, Paper Industry, Power Plant, Metallurgy, Pharmacy, Water Treatment System, Textile Industry, Food Processing, Building Automation etc. We are a reputed Single Phase Quarter Turn Electrical Actuator Manufacturer and Exporter based in India. Features : Torque : 15 Nm to 4000 Nm Made of Aluminum Alloy Resistant to heat, acid and alkali It is water proof and dust proof High efficiency, low power consumption and outstanding weatherproof heavy duty motor Steady start tempo for efficiently avoiding water hammering to extend the service of life tubes All the joint are armed with waterproofing seal (IP 67) Continuous mechanism position indication Low noise level Built  in thermal protection which checks the motor from burning out Auto declutch wheel type manual override Sophisticated design manual override without any clutch to protect the user from injury (Model: MOD 3-1 to MOD 12) Various Options : On Off Type Integral Starter Unit On  Off Type Potentiometer Feedback Modulating / Regulating Type Additional Limit Switches (2 Units) Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC Standard Voltage : 24V DC 220V AC 110V AC

• Size Range: 2" to 16"
• Temprature: up to 160°C Depending on MOC
• Pressure rating: PN 10 (PN 16 On Request)

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations, Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes, Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

• Color: SMOKE GREY
• Usage: BUTTERFLY VALVE, BALL VALVE, PLUG VALVE, DAMPER
• Name: MOD

single phase /110vac/dc / 24vac/dc electric actuator suitable for quarter turn application industrial valves torque 50nm to 5000nm

• Material: Aluminum, Carbon Steel, Stainless Steel
• Power: Pneumatic
• Pressure: High Pressure
• Type: Pneumatic Actuator
• Country of Origin: India

We are offering pneumatic rotary actuator single acting. Specifications method of transmission rack and pinion type actuation double acting body extruded aluminium hard anodized caps and rack aluminium pressure die cast pinion en 8 seals buna – n viton air pressure normal air supply pressure: 4kgcm² max, air supply pressure: 8kgcm²

• Pressure: Low Pressure

• Type: Electric Actuators
• Material: Aluminum
• Color: Blue
• Voltage: 110V, 220V, 380V, 440V, 24V
• Certificate: CE Certified

Pneutork series electric actuator is used for controlling 0°-270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valve, plug valve, louver valve and so on. It widely applies to petroleum, chemical, water treatment, shipping, paper making, power plant, heating, light industry and other industries. It can be driven by 380V/220V/110V AC power or 24V/110V DC power, inputs 4-20mA current signal or 0-10V DC voltage signal as control signal. It moves the valve to the right position, and achieves automatic control, its maximum output torque is 2000N·M. (CE certificate approved). Performance Feature 1. Actuator body —The body is made of hard aluminum alloy with anodize treatment and polyester powder coating. It is highly corrosion-resistant and waterproof level is IP67. IP68 is optional. 2. Motor —Fully enclosed squirrel-cage motor with small size, large torque, small inertia force and F class insulation rating. Internal hot protection switch avoids damaging of the motor. 3. Manual Structure —The design of spanner is safe, reliable, labor-saving and small. When the actuator is not energized, it can be operated by handle. When you don t need manual operation, put the spanner in the slot on back side of the actuator. 4. Position Indicator - Installed in the center axis for observing position of valve. To avoid ponding and observe conveniently, it is designed by convex lens. 5. Seal — It has good seal performance. And its protection class is IP67, also IP68 is optional. 6. Limit Switch—Mechanical and electronic double limit. Mechanical limit screw is adjustable, safe and reliable. Electronic limit switch is controlled by the cam. Position of limit switch can be set accurately and conveniently by simple adjustment. 7. Self-lock— Precise worm and worm gear transfer large torque efficiently with low noise(max. 50 dB) and long life. The self-lock function prevents inversion and insure stability and reliability. High-effective lubricant oil has been added ex-factory, it doesn t need to add any more. 8. Anti-off bolt — The bolt will attach to the cover when removing the cover. All external bolts are made of stainless steel. 9. Installation — Installation size at the bottom of Electric Actuator meets international standard ISO5211 and DIN3337. The output hole is ditetragon that it is easy to install by linear or 45°. The actuator can be installed vertically or horizontally. 10. Circuit — Controlling circuit meets single-phase or three-phase power supply standard with reasonable and compact layout. Terminals meet various of additional functional requirements effectively.

• Structure: PARKER
• Brand Name: PARKER
• Valve Motion: Built-in meter out flow control valves with reverse flow check valves provide a neat package
• Model Name/Number: HTR Series - Hydraulic Rotary Actuators
• Rated Load: 000 psi (207 bar) non-shock (Except HTR22/45: 2000 psi (138 bar) non-shock)
• Maximum operating pressure: 3000 psi (207 bar) non-shock (Except HTR22/45: 2000 psi (138 bar) non-shock)
• Operating temperature range: Nitrile seals: -40 Degree to 180 DegreeF or -40 Degree to 82 DegreeC. Fluorocarbon seals: -20 Degree to 250 DegreeF or -29 Degree to 121 DegreeC
• Standard rotations: 90 Degree,180 Degree,360 Degree,450 Degree
• Maximum breakaway pressure: 70 psig or 4.8 bar

ball valve actuators, Steam Valve, Butterfly Valves

Electric Valve Actuators

Motorized Actuator, cnc pcb drilling machine, Linear Positioning Stages