Electronic Display Board Dealers in Kuber Nagar, Ahmedabad

Our Graphic LCD Display is well-known for its excellent picture quality. The Graphic LCD Display is fabricated by using qualitative raw material and is appreciated in the worldwide market. Graphic LCD Display that we offer provides easy interface and widely appreciated for its visual clarity. The Graphic LCD Display, we offer, displays information in the form of text or dot matrix pattern.

• Feature: Easy to Use,Long Life,High Brightness,Low power consumption
• Brand Name: Imagic solution
• Language Supported: English
• Minimum Order Quantity: 1 Piece

• Type: Out Dor Display
• Brand Name: Dev
• Mounting Type: Wall Mounted
• Lighting Color: Red
• Dimension: 6Feet To 1Feet

Single Face LED Airport Guidance Sign Boards Item Code : SE–AGS–LED–1F Features   Designed and developed as per ICAO Annex 14 and FAA Standards. Virtually eliminates runway shutdowns due to LED light source. Direct replacement for existing sign. Creates a highly uniform distribution of light, eliminating hot spots and shadows. Operates on ferroresonant or thyristor CCRs that are designed in compliance with FAA  / ICAO-ANNEX-14 requirements. Operates on 3-step, 5-step and 6.6A series circuits. Eliminates re-lamping expenses and reduces on-going maintenance costs. Improved safety — low, regulated DC voltage inside sign. Sign lumen maintenance of 70% (L70) minimum for greater than 5 years (assuming sign operates an average of 12 hours per day) Type of Sign Illumination                     : Trans illuminated signage with retro reflective sheets / regular sheets. Lamp Type                                                  : LED. Sign Power Input                                     : Style-3 signs designed for operation from an airport series lighting circuit with a current range of 2.8 to 6.6 amperes or a current range of 8.5 to 20 amperes using Isolation Transformer In-between. (As per FAA - AC No: 150/5345-44F - Clause 4.1.4 – Sign Power.) Wind Load and Frangibility                 : Legs provided with breakable coupling for frangibility; As per FAA - AC No: 150/5345-44F - Clause 4.8.3.2 Wind Load and Frangibility Test can withstand wind speed of and jet blast of 90 m/s. As per ICAO Annex 14 Ch. 11 Clause: 11.7.6. Water Ingress Protection                     : As per FAA - AC No: 150/5345-44F - Clause - 4.8.4.5 Rain Test. Low Temperature Tolerance              : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.3 Low Temperature Test. High Temperature Tolerance             : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.4 High Temperature Test. Luminance Ratio                                      : Between red and white elements:  1:5 to 1:10 (For Mandatory Signs) (As per ICAO Annex 14 – Appendix-4 Clause: 5). Between adjacent grid points: not more than 1.5:1 (for grid spacing 7.5 cm) (As per ICAO Annex 14 – Appendix-4 Clause: 8). Between adjacent grid points: not more than 1.25:1 (for grid spacing 15 cm) (As per ICAO Annex 14 – Appendix-4 Clause: 8). Maximum and Minimum Luminance over whole sign face: not more than 5:1(As per ICAO Annex 14 – Appendix-4 Clause: 8). Arithmetic Average Value of Sign Luminance of  ( As per ICAO Annex 14- Appendix-4 Clause:4 (a) ) Red Background               :   30 cd/m2 Yellow Background         : 150 cd/m2 White Background          : 300 cd/m2  Sign Board Frame Work                       : Signage frame work contains thick anodized 2 mm thick aluminium profile work with stiffening support.  Sign Board Back Cover                          : 2 mm thick Aluminium sheet Back cover.  Sign Board Face                                       : The signage face is made of 4mm thick poly carbonate glass with computerized cutting and pasting of regular vinyl or Retro-reflective vinyl of make 3M or equivalent.   Emergency Change Over                    : Signage Board with Built in Change over Circuit for Main and Stand-by C.C.R for automatic change over operation in case of Line / C.C.R Fault.  Operating Temperature                      : Temperature: -40°F to +131°F (-40°C to +55°C)

EAGLE is launching its ERD Series of easy to read LED remote displays. Available with a choice of 5, 11 or 17 cm digits the high intensity, red LED characters can be seen from up to 325 feet and with a filtered lens are clearly visible both indoors and outside. These easy to read displays mean that operators do not need to walk around a site checking readouts. When integrated to a weighbridge, for example, there is no reason for a driver to leave the safety of his or her cab. The remote displays use auto-learn technology to make installation quick and easy. This can interpret the communication format and data stream of almost any instrument automatically to reduce set up time. There is usually no need to press buttons or set switches to configure the ERD series with its plug and play capability. It can be integrated to virtually any weighing equipment and can be used for a huge range of applications. The remote displays have a wide range of preinstalled programmes for different weighing applications and can display data in either tones or kilograms with the gross and net weight.

Indoor LED display may widely be use at waiting room of railway station, live TV programs, exhibition facilities, artistic centres, entertainment locations, large scale artistic ceremonies, live concerts etc. Some salient features are as follows: Can be used to make any event, conference, meeting, etc live through camera. High contrast ratio and good evenness, high uniformity, Display maintenance Long using life & MTBF Low power consumption Better viewing effect for both text and graphic or video Big viewing angle, horizontal can reach 160 degree and vertical can reach120 degree. In this range of the viewing angle, the picture will not be out of shape and appear colour cast situation.

• Shape: Rectangle
• Usage/Application: Outdoor

As one of the knows Printed Circuit Board ( PCB) manufacturer, Bhatt Electronics has been offering Quality PCB Prototypes to Bulk Quantities in given Specified time. We provide PCB fabrication in Single Layers PCB, Double Layers PCB, PTH PCB, Flexible PCB and Aluminium Clade PCB in different materials like FR1, CEM1, FR4, etc.

• Type: Led Lights
• Shape: Bar
• Body Material: Aluminum, Ceramic, Chrome
• Voltage: 110V, 220V
• Warranty: 1 Year, 2 Years
• Lighting Color: Coolday Light, Warm White
• Light Source: LED

Numbers can be changed by flipping.Numbers from 1-99 can be created.Neon Yellow on one side & orange on the other. Code S2449

Led Lights, led bulb, Cfl Lights, Honey Brand 0.5 Watt Decorative Lamp

Smd Led Module, LED Power Module, Cob Module

LED Glass Advertising Display, Video LED Wall

Led Lights, Dining table, Sofa Set

indoor led display, led curtain, Video LED Wall

Corrugated Sheet

Led Panels, 9w led bulb, LED Bulbs, Led Wall Lights

LED T5 PCB, Single Layer MC PCB with LED Mounted, Street Light PCB With LED

P10 LED Module, Cap Embroidery Machine, Colored Socks

Led Lights

Laptop, Air conditioner, barcode label printers, Computer Printers

Printed Circuit Board, brushe, Brushes Nylon Bristle

led display panel