Electronic Test Instruments Dealers in Ellisbridge, Ahmedabad

• Power Source: Battery
• Weight: 34 G
• Operating Temperature: -20 to +70 DegreeC
• Dimension: 60 x 38 x 18.5 mm

• Brand Name: Kyoritsu
• Application: Industrial
• Operating Temperature: 2000
• Power: R6 (AA) (1.5V) x 6
• Applicable standards: IEC 60529 IP54
• Dimensions: 105(L) × 158(W) × 70(D)mm
• Weight: 550g approx.
• Overload protection: Earth Resistance: 280V AC for 10 seconds across 2 of the 3 terminal, Earth Voltage: 300V AC for 1 mi

Dust and drip proof.(designed to IEC 60529 IP54) In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories. (unit can be hung from the neck for simplified measurement) Designed to meet IEC 61010-1 safety standard. Capable of measuring earth voltage. Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. Small and lightweight. Shock resistant new case material. 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. Measurement ranges Earth Resistance: 0 - 20Ω/0 - 200Ω/0 - 2000ΩEarth Voltage [50,60Hz]: 0 - 200V AC Accuracy Earth Resistance: ±2%rdg±0.1Ω (20Ωrange)±2%rdg±3dgt (200Ω/2000Ωrange)Earth Voltage: ±1%rdg±4dgt Overload protection Earth Resistance: 280V AC for 10 secondsacross 2 of the 3 terminalsEarth Voltage: 300V AC for 1 minute Applicable standards IEC 60529 IP54 Safety Standard IEC 61010-1 CAT III 300V Pollution Degree 2, IEC 61557 Power source R6 (AA) (1.5V) × 6 Dimensions 105(L) × 158(W) × 70(D)mm Weight 550g approx. Included Accessories 7095A (Earth resistance test leads) × 1set(red-20m, yellow-10m, green-5m)8032 (Auxiliary earth spikes) × 1set7127A (Simplified measurement probe) × 1setR6 (AA) × 69121 (Shoulder strap)Instruction ManualCarrying case : 9084(Carrying case[Soft]:4105A only): 9165(Carrying case[Hard]:4105A-H only) Optional Accessories 7100A (Precision measurement cord set)

Pro_tek range of Advanced Power conditioner Series introduces Pro_tek CVT. These CVT are specially designed for their best performance to Indian power conditions. General specifications Power supply : 210 – 250 Volts 50 hz. Power consumption : 15 Va ( max.) Size : 190 mm L X 95 mm W X 210 mm D Weight : @ 2.0 Kg Operating temperature : 20 – 50 degree centigrade   Measurement function PARAMETER : Voltage / Current / Power factor ( star model) SYSTEM : digital sampling , Typical r.m.s measuremetnt and averaging samples. VOLTAGE : 0-500 volts accuracy : .5 % to 1 % of reading CURRENT : 5 Amp through CT can be defined multification factor during initial setup TIME : True Real Time Clock DATA LOG.INTERVAL : Can be set from 1 min to 60 Min. INTERFACE : Through RS-232 , dedicated software to analyze values , can be transfer to Microsoft excel Report : data , graphical

FEATURES   => State of Art Microcontroller Based Design.=> 7 Digit Stepper motor counter=> CT Ratio Site Programmable trough DIP switch=> True RMS measurement.=> Reverse indication for wrong wiring polarity=> Direct Reading No multiplication factor

• Type: Electromagnetic Sieve Shaker
• Color: Brown, Grey, Light White, Silver
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year, 2years
• Application: Industrial

We are the main supplier of this product.

analog panel meters, Digital Panel Meters, process transducers

  L and T-Powerman offers sophisticated system for Monitoring & Managing Energy Consumptions by Electricity, Water & Gas. It can be integrated with ACBs, MCCBs, Meters & PLCs. Remote real-time monitoring & data acquisition. Intuitive Windows based Graphical User Interface (GUI).

• Conductivity Range: 0 TO 20.00,200.0,2000 μS/CM / TO 2.00,200.0 M S
• Temp Cof
  cent: 0.10 % PER DEG

MICRO CONTROLLER BASED CONDUCTIVITY METER designed to measure the specic conductivityof a solution using a conductivity cell. It enables to measure the conductivity directly on display. This instrument incorporates an integrated circuitry and thus the power consumption is very low.

Introduction :- Paddle type turbine flowmeters for various Liquids. Accuracy - +2% on full scale valve. Max operating Pressure - 10 kg/cm’ 4-20 mA output Mounting - Panel / Wall / Field mounted Versions Display - LED / LCD in one line / Two line Reading in LPS / LPM / M3 / hr Measure Flow Instantly(Velocity must be more than 0.5 m/sec.) Material - pp/ms/ss pipe and turbine is in pp/ss(Teflonon request) Programmable Relay outputs Sizes - 12mm to 1200mm Max. operating temp - 70* C(For higher temp. sp.material acailable) Microprocessor based signal processing Also available with totallizer Routine tost of pump become very easy. Power Supply - 230 AC / 12V DC / 24V DC Measurement tank or “V” notch is not required. Very reasonable price & fast delivery.

• Voltage: 600V
• Brand Name: Fluke
• Current: 40A
• Usage: Industrial, Laboratory

• Type: Hand-Held
• Brand Name: Eutech
• Model No.: PCD 650
• Waterproof: Yes
• features : Optimum performance, Enduring service life, High efficiency

Intelligent Panel Meter, Crompton Greaves Electric Motors

• Brand Name: EIE

We are offering This heat flow meter is a commercial apparatus for thermal conductivity (or thermal resistance) of insulation materials by guarded hot-plate. Specification GUARDED HOT PLATE :- Size : Metering area :- 150 x 150 mm Guard : 75 mm all around with a gap of 3mm between guard and central. Overall size : 310 mm Plate thickness : 4 mm (approx). Material : brass Max. Working temperature: 150°C No. of thermocouples : 2 each in central & Guard plate. (One for control & 3 for monitoring) Central plate: 4 thermocouples are mounted on Central Plate (two at upper and lower side at the center) i.e. total 4 thermocouples. Guard plate: 4 thermocouples are mounted on Central Plate (two at upper and lower side at the center) i.e. total 4 thermocouples. COLD PLATES :- Overall Size : 310 x 310 mm Thickness : 1 mm (approx) Material : copper. No. of thermocouples : 4 in plate.(One for control & another for monitoring) Maximum working temperature : -20°C. Specimen dimensions A single specimen is required. Thickness: 30 mm to 75 mm(The thickness is within 2% of its mean thickness over its whole area) Note: Thinner specimens can be measured, if it is the thickness that they will be supplied to the end user Length and breadth: 310*310 mm (Within range 305 mm to 311 mm) Flatness: The 310 mm square faces are flat to better than 0.2 mm (Flatness criteria do not apply to compressible or fibrous insulations) Thermal conductivity range: up to 0.5 Wm·K Mean specimen temperature range: -20 to 150 c Confirms as per IS:3346

There are two basic types of resin cation-exchange and anion-exchange resins. Cation exchange resins will release Hydrogen (H+) ions or other positively charged ions in exchange for impurity cations present in the water. Anion exchange resins will release hydroxyl (OH-) ions or other negatively charged ions in exchange for impurity anions present in the water.

Digital Capacitance Meter, Toxicity Tester, HTC LCR-4070 Digital LCR Meter

Energy Monitoring System, industrial control panel, Plc System

Energy Meters

conductivity sensors, Planer Machine, Festo Rodless Cylinders