Exercise Equipment Dealers in Ghodasar, Ahmedabad

• Technical Specification: Web width
• :: 400 to 5000 mm
• Maximum Diameter Of Stock Roll: :
• 600 – 1000 mm (1200 mm – 1400 mm Optional for Heavy Duty Model): Minimum Slit Width
• :: 15 mm
• Maximum Diameter Of Finished Roll: :
• 400 to 600 / 1000 mm / 1200 mm – 1400 mm (Optional for Heavy Duty): Operating Speed
• :: 3-15 HP at 415 V, 3 Phase , 50 cycles A.C. Supply

Our machine is an ultimate LLDPE Stretch Film Slitting Rewinding Machine for its accurate slitting and rewinding qualities. It ensures perfect slitting of rolls with consistent, flawless results and constant line speed. It is available in adaptable model to suit your requirement. Our LLDPE Stretch Film Slitting Rewinding Machine is available in Rewinder, Duplex surface slitter and Rewinder and Canti lever differential slitter and Rewinder. KEW LLDPE Stretch Film Slitting Rewinding Machine ensures perfect slitting of rolls with consistent flawless quality and constant line speed.

• Power: AC380V/50Hz
• Phase: 3Phase
• I Deal In: New Only
• Turntable motor power: 0.4Kw
• Film frame motor power: 0.37Kw
• Film frame rate: 2.9m/Min

• Material: SS
• Phase: 2
• Country of Origin: Made in India
• Usage/Application: Industrial

• Material: Mild steel
• Reel size: 250-500mm
• Automation Grade: Automatic

• Production Rate (Bottle-Jar/Hour): 800-850
• Heating Load: 28
• Total Load: 26 KW

Pet stretch blowing machine, Production Rate High production rate of 1200 Containers Hour for Wide Mouth jars. Mould Clamping Hydraulic Toggle mould clamp system enhanced with Mould compensation system. Tie bar less Mould plates for faster movement and easy access to mould. Linear motion guides for faster and precise mould movement. Heating Close Loop Heating System and Auto Chamber Temperature Control (to compensate variation in preform heating due to ambient temperature). Air Ventilation system with controllable venting in heating chamber (for better heat penetration control). Start stop indexing type oven to minimize variation in temperature of both preforms coming out of chamber at a time.

• Air Pressure: 5 Bar5 Bar
• Speed: Variable
• M/c. Weight: 450 kg Approx
• Box Size: 31” X 35” X 35”
• Weight Capacity: 150 kg.
• Stretch: 250-300%

Power 230 V. with plc A C motor -3 nos With speed variable With plc operated

• Automation Grade: Automatic
• Power: 600 W
• Phase: Single
• Turn Table Diameter: 700 mm
• Turntable Speed: Upto 300%

Our Stretch Wrapping Machines are highly power efficient and high reliable operations. Obtaining the product from us is lucrative, as we can provide it in bulk all year round and make delivery within the postulated time. We own a well-constructed storage space that helps in keeping the batch under secured conditions and away from various spoiling factors such as sunlight, water, moisture, dust, rain and others.

• Frequency: 50
• Usage: Industrial
• Condition: New
• Working Height: 30 (750) mm
• Working Width: 20 (600) mm
• Voltage (V): 220

Description : Reel Stretch Wrapping Machine is a machine designed for packing Non-woven, coil, paper roils, rubber product and similar materials manufactured in small reels. This packing method can form a cocoon type packing. It is completely Moisture water & Dust proof packing and products the products.   Application : Reel Stretch Wrapping Machine is a machine designed for packing Non-woven, coil, paper roils, rubber product and similar materials manufactured in small reels.

• Cartoon Size: 24"X24" (max)
• Cartoon Weight: 50 kg.(max)
• Wrapping rate: 30 to 80 cartoons/hr.
• Power req.: 220V single phase, 1 HP

Our clients can avail from us with a wide range of Stretch Wrapping Machines. These machines are widely used fabricated different types of cartons and reels for various industries like Food, Pharmaceuticals, Garments, Chemicals and many more. In order to maintain quality of our product, our quality controllers check each part of the product and manufacturing process strictly.Features:- Protection from dust, moisture and foreign particles & pilferage.- Sturdy construction- Gives stability to Carton / Reel- Saves cost and time- Adjustable wrapping cycle time- Variable turntable speed- Less power consumption- User friendly- Less maintenance

Stretch Wrapping Machine were basically designed to protect varisous product or materials against moisture, dust, wear and tare. These machines will help to save packing cost, material wastage, labour and time. Base on the shapes of products we have desiggned various machine like ROLL WRAPPING MACHINE, WATER TANK WRAPPING MACHINE, BOX WRAPPING MACHINE, PALLET BOX WRAPPING MACHINE AND PALLET WRAPPING MACHINE.

• Type: Stretch Wrapping
• Voltage: 110V
• Condition: New
• Operating Type: Automatic
• Power: 1-3 Kw
• Machine Structure: Horizontal
• Corrosion Resistance: Yes

We are offering stretch roll wrapping machine :- protection against moisture and dust, prevent telescoping of rolls save packaging cost, labour and time better identifications of wrapped products give suitability to product economical way of packaging available in require size 500mm -600mm-800mm.

• Phase: Single
• Height: 350 mm
• I Deal In: New Only
• Installed power: 1.5 kW
• Structure Material: MS
• Speed: 50 meters/minute
• Power supply: 220V, Single phase, 50Hz
• Maximum stretch: 300%

• Power Supply: 220V/50Hz Single Phase
• Net Weight: 530kg
• Model: S - 71 /  S-71 N
• Machine Dimension L*W*H: 1510 X 2500 X 2300 / 2700mm 
• Turntable Diameter: 1500 mm
• Turn Table & Up-down Speed: variable
• Motor Gear Box & Drive: Turn Table Motor : 0.75KW 
• Wrapping Options: Easy setting by touch panel.Bottom wrapping count & Top wrapping count, setable from panel. 
• Max.Packing Weight: 2000kg
• Film Rack Lift Motor: 0.18KW

We have gained complete customers satisfaction as we make maintain proper schedules for the delivery of the consignments We procure the inputs only from the trustworthy vendors present in the market. We know the importance of the raw materials and thus make sure that their quality will never be compromised.

Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibrating of lesser amplitude to the mould while casting This is achieved in a vibrating machine. Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements. A specially designed Vibration Machine is used for vibrating the mix in moulds according to strictly controlled programmer at a frequency of 12,000 ± 400 cycles per minute. The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The center of gravity of the vibrator, including the cube and mould, is either at the center of the eccentric shaft or within 25 mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. The machine is suitable for operation on 230 V, 50 Hz, and single-phase, AC supply. Each machine is supplied with one cube mould.

• CODE NO: SF – 114
• MACHINE CATEGORY: BENCH
• PIPE: 12GAUGE
• SEAT: LEATHER
• MANUFACTURING: SHINE FITNESS EQUIPMENT

GK Rototech is the highly respectable name in the market for being the top rated manufacturer of stretch film rewinder machine. We have great experience in providing the clients with the suitable rewinding machine as per the needs of their industry. To meet the changing requirements and technology, we have a special team of designers to effectively change the specifications and model of machine. They accurately design the models as per the standards defined by the industry that are accepted in the companies all over the world. We even offer a fully automatic model of stretch film rewinder machine to make sure that the process is carried out swiftly without much human interaction or constant attention paid on the process. We develop each model under expert supervision to assure that the machine performs the slitting and rewinding process accurately. We are notably celebrated name in international market for the manufacturing presenting the best in class stretch film rewinding machine. The machine has various sections like unwinding, slitting, inspection, rewinder and control panel that results in the effective execution of the process. The stretch film is a highly stretchable plastic prepared from LLDPE used to hold materials during transporting and storing the objects. They are highly preferred in the industries like furniture, tire manufacturing, electronic industry, pharmaceutical, beverages packing, etc. We offer the best quality stretch film rewinder machine which offer an unmatching quality of cutting and rewinding of the final split plastic film. The machine is embedded with parts like clutch, break, control panel that enables effective handling and operating of the machine. We present the machines in high definition and supply and export them all the corners of the world.   FEATURES: Compact design Simple working Variable speed Control panel operated Stable dimension Low power consumption

We are offering technical data for rol cum box wrapping machine • 700mmwidth • 600mm max. roll dia • 1no reduction gear box • 1 hp motor • turn table plate with driven roll assembly • counter meter • starter • unwind shaft to place stretch roll with cone • fabricated platform • mechanical brake • heavy pipe for break support • 2 no rubber fillet covring rol m.s roller • box warping plat assembly

Our offered machine is used for packing and sealing products in corrugated box, pallets and other types of packaging material. We offer this machine to our clients in different technical specifications as per their necessities.

• Type: Automatic
• Speed: 20 km/hr
• Country of Origin: Made in India
• Motor Power: 3 HP
• Maximum User Weight: 130 kg
• Motor Type: AC
• Use: Commercial

We provide horizontal l Coil Wrapping Machine. This machine is designed for continuous operation and is rigid & sturdy. The machine is designed with an emphasis of functionality, reliability and ease of operation. Coil wrapper wraps the coil shaped products in a spiral manner through eye of the product. This is a means of applying stretch film to a load consisting of stretch rollers supported on a vertical ring.

The Stair Stepper  provides two exercise positions which deliver the cardiovascular benefits of steeping or stair climbing motion and the waist, back, and hip stretching benefits of a rotator . The exercise completely avoids impact stress on feet, hips and lower back. The Stair Stepper  improves both cardiovascular fitness and flexibility.

Being a customer-focused organization, we are engaged in offering a wide assortment of Roll Stretch Wrapping Machines. The offered stretch wrapping machines help in protecting packed items and makes them convenient to be stored or transported. These machines saves packaging cost and labor. Moreover, these machines can be availed by the clients in various specifications and grades in order to meet the customers' requirements. 1.Max roll 32 inch (800 MM) weidth and dai meter 20 inch (500 MM) 2.Min roll 3 inch (75 MM) weidth dai meter 20 inch(500 MM) 3.Control pannel ( auto stop and counter meter )    

• Weight: 100-500kg
• Voltage: 110V
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric
• Power Source: Diesel
• Warrenty: 1year