Expansion Valves Dealers in Ahmedabad

We are offering expansion valves. Needle valves are available in flanged as well as in screwed type. It’s function is to meter the proper amount of refrigerant and reduce the pressure of liquid gas entering the coil. Size available :½”, ¾”, 1”,1¼”, 1½”, 2”, 2½”, 3”, 4”, 5” and 6"

• Brand Name: Janatics
• Port Size: G1/4
• Flow Rate Litre Per Min: 1200
• Operating Medium: Compressed air - dry, filtered, lubricated
• Part Number Text: DS245SS61-A
• Product Information: Ensure to have a minimum air supply of 1200 lpm to the valve through a tube of minimum 8 outer diameter - with minimum 5.5 internal diameter to prevent malfunctioning of the valve
• Protection: IP65
• Series: DS2
• Specific Uses Of The Product: Suitable for manifold mounting
• Temperature Range Celsius: 5 to 60
• Tsin: TC006261224
• Valve Type: 3/2 valve
• Working Pressure : 42410 Bar

• Brand Name: Danfoss
• Material: Brass
• Model Number: 068Z3403
• Usage/Application: Refrigeration
• Connection Type: Flare
• Temperature Range: -40/+10 C,-40/+50 F

• Material: Brass
• Color: Golden
• Valve Size: 5 inch
• Pressure: High Pressure

Thermostatic Expansion Valves available for various refrigerants and temperatures. You can order them with internal & external equalizers. We will guide you for the application

• Material: Mild Steel
• Valve Size: 5/8*7/8 
• Item Code: HVE-MVE-VVE
• Brand: carel

• Size: 3/4 to 2 Inch
• Material: Brass
• Features: Durability, Finely finished,Rust proof
• Temperature: -10 to +260 deg C

Thermostatic Expansion Valves available for various refrigerants and temperatures. You can order them with internal & external equalizers. We will guide you for the application 

• Installation orientation: As required
• Hot water inlet temperature: Maximum 90 °C
• Connection sizes: G 3/4"
• Setting range: 30 °C to 60 °C
• Flow rate at 1.0 bar pressure differential across valve: 25 litres / min
• Control accuracy: < ± 4 K

TM 50 thermostatic mixing valves provide control of the water temperature and are used: For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB 191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets. Special Features! Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates! Simple setting of the required water temperature! Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixedwater setting! The cold water inlet is automatically cut off if the hot supply fails! Inner components are of scale-resistant materials! Complies with KTW requirements Range of ApplicationFlow medium: WaterOperating pressure Maximum: 10 barMaximum pressure difference between hot and cold inlet supplies: 2.5 bar

We are offering it is an extension . It helps in the easy checking of the pressure of the inner tyres. Very difficult to check the pressure of the inner tyres as we cannot reach to the valve.

expansion valves, Refrigeration Compressors Parts, air compressors parts

thermostatic mixing valves, Ball Valves, fire fighting valve

thermostatic expansion valves

Thermostatic Safety Valves, Sheet Metal Structural Fabrication