Fertilizer Machine Dealers in Ctm, Ahmedabad

• Hopper capacity: 33 Liters
• Screen area: 388 mm (W) x 762 mm (L)
• Stirrer size: Ø 138 mm x 368 mm Length
• Oscillation: 110 Per Minute.
• Output: 30 to 90 Kgs./Hr.
• Charging height: 1135 + 5 mm
• Discharging height: 655 + 5 mm
• Main Electric Motor: 2 HP / 1440 RPM / 3 Ph.

Key Features : Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

Tablet Coating Machine, Rotary Tablet Machine

Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.

• Model: FALCON MM – 200
• Output: 50 to 200 Kgs./Hr.
• Rotor Assembly Diameter: 250 mm. Approx.
• Rotor Speed: 750 / 1500 / 2300 / 3000 RPM
• Screen dimension Inner Diameter: 265 mm./ Height 140 m
• Motor: 3 HP. / 1440 RPM / 3 Ph.
• Material charging height: 1460 + 5 mm.
• Material discharging height: 760 + 5 mm.

Falcon Machineries has developed a range of equipments which are used in the granulation process. These include the vibro sifter machine, multi mill machine, paste castle, the double cone blender machine, the high shear mixer granulator and the intermediate pharmacy container. All equipments have been manufactured with high quality material that guarantees durability and smooth operation. One distinguishing feature of these machines is the ease of maintenance and cleaning, which eliminates any contamination between different products as well as durability.

• Material: CRC
• USE: To Transplant Seeds
• Length: 32 Inch
• Weight: 1.5 Kg
• Diameter: 1.5 Inch
• Opening: 1 Inch

• Automatic Grade: Automatic
• Size: As Per Requirement
• Material Grade: SS
• Design Type: Standard
•  :  

We specialize in the manufacture of high quality Granulator Machine that is used for drying and granulating pharmaceutical materials. The stirring diameter of our Pet Granulator Machine is spread up to the diameter of 300mm with oscillating type stirrer motion. Besides, we are one of the foremost Plastic Recycling Granulator Machine Manufacturers in India.

Capious Chip Spreader is constructed with 12mm and 8mm Steel Plates & Square Pipes. It can be mount on standard tipper and Tractor Trolley. 2500mm spreading width The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off System

We feel immense pleasure to inform you our new launched product i.e. Chip Spreader. It is constructed using the high graded stainless steel plates & square pipes with 12mm and 8mm   It is mounted on standard tipper Spreading width is of 2500mm The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off system.

• Size: 8" (200 mm)
• Dimensions: 66 x 92 x 165 H
• Net weight: 250 kgs.

Granulator equipment is generally used to render powders to a specific form that facilitates their flow ability and handling. We offer typical granulator machine for cosmetic, spices and pharmaceutical industries to formulate several ingredients like powdered incipient, small amounts of active ingredients and the liquid binder that locks the powder as granules to prevent segregation. In general pharmaceutical industries require separate equipments to pre-disperse, blend and to granulate various powders, but all these problems can be solved with our multi step granulator machine. Hopper, the granulating blades both for dry and wet, sieves and all other parts which come in contact with the material to be granulated are made from stainless steel. Separate stirrers for dry and wet granulations are provided and they are so designed that the efficiency of granulation process is optimized in each case. The stirrers can also be replaced quickly and easily. A simple and positive arrangement of holding and tensioning of the screen is provided. The arrangement is such that the screen remains stretched throughout the operation and very close and uniform gap is maintained. Thus, it produces better excessive wear on both stirrer and the mesh.

• Hopper Size: 33 Liter
• Screen Area: 388 mm (W) X 762 mm (L)
• Stirrer Size: 138 mm x 368 mm Length

In compliance with cGMP guidelines., Important machine in the process of in granulation in tablet making as quality of tablet is determined by the desirable quality of the granules used for its compression., Can be used for dry aspect of the granulation process Quality & percentage of granules can be achieve better compared to other processing machineries like Multi Mill, Comminuting Mill etc, Special oscillatory rotor action ensures minimum fines, Contact parts are made of SS 316., Easy to operate clean maintain., Simple screen holding and tensioning device., Castors provided for mobility.

• Machine Type: Bhagwati ACRA-GRA-8
• Hopper Size: 8' (200 mm)
• Electric Motor: 1.H.P., 1440 R.P.M.,440 V., 3 Phase,50 Cycles, A.C.
• Output: 200 Kgs/ hr.(Output depends upon size of granules and type of material)
• Overall Dimensions(cm): 46 W x 770 D x 123 H
• Case Dimensions (sm): 66 x 92 x 165 H

Oscillating Granulator equipment is generally used to render powders to a specific form that facilitates their flow ability and handling. We offer typical oscillating granulator machine for cosmetic, spices and pharmaceutical industries to formulate several ingredients like powdered incipient, small amounts of active ingredients and the liquid binder that locks the powder as granules to prevent segregation. In general pharmaceutical industries require separate equipments to pre-disperse, blend and to granulate various powders, but all these problems can be solved with our multi step granulator machine.Bhagwati Machines Pvt. Ltd. in India offer efficient reciprocating type new mixing granulator, which is suitable for granulating both the dry and wet materials.

• Stirrer Dia.: 8" (200 mm)

Sturdy and durable.Easy to operate clean maintain.Noise level minimum.Large output. Continuous oscillating stirrers drive.Simple screen holding and tensioning device.

The fertilizer drying drum machine is used to dry compound fertilizers with required humidity and size of the particles. It not only dries the compound fertilizers but also dries other granular material. The moisture content will be reduced from 5% to 30% of the compound fertilizers whereas while drying bio-organic fertilizer, the moisture levels will be reduced from 40% to 10%.  Features High utilization rate of heat energy due to efficient design. Strong adaptability of fertilizers and other materials. Low energy consumption due to small resistance for hot air. Huge capacity of the drying drum. Benefits Reliable operation with high yielding. Ideal for mass fertilizers production. Simple and easy drying process. Low maintenance and repair cost. Lengthy service life. Automation operation with better drying effect.

The fertilizer drying drum machine is used to dry compound fertilizers with required humidity and size of the particles. It not only dries the compound fertilizers but also dries other granular material. The moisture content will be reduced from 5% to 30% of the compound fertilizers whereas while drying bio-organic fertilizer, the moisture levels will be reduced from 40% to 10%. Features High utilization rate of heat energy due to efficient design. Strong adaptability of fertilizers and other materials. Low energy consumption due to small resistance for hot air. Huge capacity of the drying drum. Benefits Reliable operation with high yielding. Ideal for mass fertilizers production. Simple and easy drying process. Low maintenance and repair cost. Lengthy service life. Automation operation with better drying effect.

• Power supply: 1 HP / 1440 RPM / 3 Phase
• Charging height: 1135 + 5 mm

In compliance with cGMP guidelines. Important machine in the process of in granulation in tablet making as quality of tablet is determined by the desirable quality of the granules used for its compression. Can be used for wet and dry aspect of the granulation process. Quality & percentage of granules can be achieve better compared to other processing machineries like Multi Mill, Comminuting Mill etc. Special oscillatory rotor action ensures minimum fines. Contact parts are made of SS 316. Sturdy and durable. Easy to operate clean maintain. Noise level minimum. Continuous oscillating stirrers drive. Simple screen holding and tensioning device. Screen – Available in different size durable cost effective. AC Variable Frequency Drive – OPTIONAL at extra cost. Castors provided for mobility

Cylindrical mid portion and conical top portion for efficient mixing operation & provided with counter balanced lid. Lid provided with vents, view ports & charging openings. The impeller is designed to provide mixing at the bottom and at the centre of the bowl and is driven through a specially designed bearing housing that facilities inside wash facility for quick change over and also prevents leakage of powder from bottom entry and leads to longer life of gear box. The discharge port is mounted horizontally into the bowl with vertical downward opening. The opening is operated by pneumatic cylinder and discharged can be regulated for required opening.

• Output: 1 Kg to 50 Kg / hour

The Laboratory Oscillating granulator is for wet and dry granulation widely used in research laboratories of pharmaceutical, food and chemical industries. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening

• Voltage: 220-240 V
• Country of Origin: Made in India
• Capacity: 500Kg/hr
• Automation Grade: Automatic
• Brand Name: Envicare
• Material: MS
• Frequency: 50-60 Hz
• Power Source: Electric
• Phase: Three Phase

• Type: Fertilizer Dibbler
• Application: Agricultural Use
• Weight: 100-200kg
• Color: Available in Many Colors
• Driven Type: Hydraulic
• Feature: Long Life
• Warranty: 1year

As per research if fertilizer puting inside the soil upto 2-3 inches near the plants than growth of plants is too good and wastage of fertilizer is reduced and 100 % fertilizer can be use by this device.

English Agro is engaged in manufacturing and supplying of excellent quality Venturi Injector. Fertilizer Injector is manufactured from superior quality raw materials. Based on the requirements of the clients Venturi Injector available in different sizes. Fertilizer Injector can be using existing water pressure and is perfectly adaptable for all Drip & Sprinkler Irrigation Systems. The Process of Installation of Venturi Injector is very easy. Fertilizer Injector is available in Plain Socket End & Screw End. SIZE AVAILABLE ¾”, 1” , 2” FEATURES and SPECIFICATION Venturi Design Innovative Venturi Design for more injection Rate. Addition Valve Provided Additional Valve provided for suction side to prevent reverse flow of water. Additional Suction Filter To avoid entry of solid particles in system, additional suction filter is provided. Protective from corrosive chemicals and chemical resistance. Excellent ultraviolet resistivity due to presence of carbon black. Highly efficient and compact differential pressure injection device. Economical and low cost option. Venturi Injector is mostly used for Fertilizer and chemical injection through drip and sprinkler irrigation systems.

• Material: Plastic
• Color: Black,Green
• Brand Name: Nirmit
• Flow Range: 228-552l/h
• Pressure: Low Pressure

Our clients can avail optimum range of Stone Chip Spreader from us at pocket friendly prices. We manufacture, export and supply Stone Chip Spreader from Ahmedabad in Gujarat to fulfill the requirements of the construction industry. Our team of professionals uses the most reliable raw material for its fabrication. Our offered range of Stone Chip Spreader is construction machinery that is easy to use, durable, robust and less time consuming.

• name: glue spreader machine
• quality: High
• result: max.
• features: Can be made as specified requirement ,law ope. cost , latest technolo

We are leading Manufacturer, Exporter & Supplier of Glue Spreader.  

Glue Spreader

Single Super Phosphate Fertilizer Plant, Lime Calcination Plant

Fertilizer Injector, CPVC Ball Valves, drip irrigation ball valves

Biomass Plant, Crushing Plant, Steam turbine power plants

NPK Fertilizer Packing Machine, Industrial Packing Conveyor, Slat Conveyor

granulation machine, Sifting Machines, Comminuting Mill Machine