Fertilizer Machine Dealers in Ahmedabad

APPLICATION : MIXING BOWL AND COVER: in three section • The mixing bowl is fabricated with S.S. 316. The bowl is specially design in three sections. The flat bottom, mid portion is cylindrical and the top portion is conical. This design helps the machine to move efficiently. The machine is provided with the counter balanced lid. The lid is provided with the vents, charging openings and view ports. THE MAIN IMPELLER AND DRIVE: The main impeller is consisting of dual speed 750/1500 synchronous dual HP TEFC motor, coupled through a belt drive to a worm reduction gearbox with chain coupling. The machine is consisting of specially designed bearing housing to drive the impellers. The impeller does the mixing at the bottom and at the centre of the bowl. The inside wash facility is been very helpful for quick change over. The bearing housing prevents the leakage of the powder from the bottom entry. This design leads to longer life of the gear box. CHOPPER: The dual HP dual speed (1440/2800 synchronous) TEFC MOTOR is given for the chopper. The motor shaft is made up of S.S. The chopper is consists of 4 blade S.S. impeller. The assembly mounted in the bowl horizontally in which the shaft is integral with the motor. DISCHARGE PORT: The discharge port has vertical downward opening and is mounted horizontally. The pneumatic cylinder is used to operate the opening. MOUNTING: At the bottom, the drive assembly is mounted by the channel frame. The sturdy channel frame is made of M.S. On the top, the bowl is mounted. The platform is provided by the S.S. staircase and railings. The S.S. dimpled plates cover the half of the platform. The area under the bowl is covered with S.S., for the easy and safe movement of the operator. The entire body of the machine is covered with the S.S. covers. CONTROL PANEL: The control panel is situated on the platform. The control panel is provided with for the slow, fast, on, off functions the actuator manual and auto controls timer. Ammeter/ voltmeter for the motors Pressure gauge and indicator light Air regulator and air filter The PLC based control panel can be provided if required. MAIN PANEL: The main panel consists of MCCB, and the wires are given the numbers for the easy operation. SPECIAL FEATURES: The shaft is covered by the air purged shaft seal. In built cleaning system for the shaft seals. To reduce the vibration and for the better transmission, the fanner taper lock pulley is given. The oil seals and sleeves are provided to main bearing housing to prevent the leakages and cross contamination. To prevent the entry of the powder into the impellers and jamming the pressure switch control is provided.   The chopper can not operate directly or independently due to the circuits, with interlock contactors. To regulate the discharge plunger the 3 position solenoid valves are given which helps to open and close at desired levels. The non return valve and water inlet/outlet connections are given with the pneumatic circuit for the washing of the main impeller assembly without dismantling. SAFETY FEATURES: Motor is provided with the locking system to eliminate the accidents. The moving parts are enclosed for the safety. PNEUMATIC SYSTEM:The pneumatic systems require the air pressure of 3 to 5 kgs/sq cm. To operate the discharge valve. The air filter pressure gauge 2 way solenoid valve. The pipes ferules and pneumatic fittings.

• Screen area: 388 mm (W) x 762 mm (L)
• Output *: 30 to 90 Kgs./Hr.

If you are looking for high performance Pharmaceutical granulator machine than Ganesh technology is the right destination for all your quaries. We are supplier and exporter of all equipment related to solid dosage form department. Our line includes granulators, fluid bed dryers, powder mixing equipment, blenders, tumblers, Pharmaceutical siever machine and many more.

Silicone Based Spreader, Remand - Bio Pesticides, Soil Conditioner

  KAUSHIK chips spreader comes as a mechanical attachment for laying of pre-coated chipping surface treatments that provides long-time conservation and maintenance of the roads. The roads once constructed needs constant repair as it is prone to wear and tear due to weather influence and rolling traffics. A chip spreader through chip sealing gives special protective wearing surface to an existing pavement. For maintaining the quality and giving the roads a long-lasting effect, stone chipping is one of the most effective method and this is done by a chip spreader, a superior product in our Ancillary Products line.

• Country of Origin: India
• Material: Gi Hopper and SS Set
• Brand Name: Oasis
• Suitability of Seed: Multi Crop
• Usage/application: Can Use Sawing Multi Crop
• Available Tyne: 5 Tyne , 7 Tyne, 9 Tyne Too.
• Voltage: 220V

Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.

Capious Chip Spreader is constructed with 12mm and 8mm Steel Plates & Square Pipes. It can be mount on standard tipper and Tractor Trolley. 2500mm spreading width The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off System

Tablet Coating Machine, Rotary Tablet Machine

• Automatic Grade: Automatic
• Size: As Per Requirement
• Material Grade: SS
• Design Type: Standard
•  :  

• size: 1 mm to 10 mm

Power as per suitable, Motor crompton, Gear box aliconElectric part L&T , M.O.C. contact part S.S Other part M.S., Auto electric panel with timer, Granules size 1 mm to 10 mm round shape , Auto feeder auto discharging valve.

We have come up with a wide assortment of Automatic Seed Cum Fertilizer Drill in Ahmedabad, Gujarat. We source Automatic Seed Cum Fertilizer Drill from reliable vendors in the market to make sure that only flawless range reach at vendors’ end. This Seed Cum Fertilizer Drill is precisely designed using quality assured material and ultra-advanced technology. Our Automatic Seed Cum Fertilizer Drill is widely used for delivering seed and fertilizer into the land simultaneously.   Specifications : Tractor driven seed cum fertilizer drill available in wide range of 5 tines to 21 tines Row to row spacing can be adjusted according to requirements Available in single & double hopper variants All kind of seeds sawing can be done by changing suitable rotor provided with the product

• Hopper capacity: Liters
• Screen area: 388 mm (W) x 762 mm (L)
• Oscillation: 110 Per Minute.
• Output: 30 to 75 Kgs./Hr.

Salient Features: Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

• Hopper Capacity: 33 Litres
• Dimensions: 28" (L) x 16.5" (W) x 48" (H)
• Net Weight: 210 Kgs

Oscillating Granulator plays an important part in the process of granulation in tablet making as quality of tablet is determined by the virtue of the granules used for its compression. Oscillating granulator can be used for wet and dry aspect of the granulation process. Oscillating Granulator is extensively used wherever tablets or pellets are produced. Qualities of granules are better compared to other processing machineries like multi mill, comminuting mill etc. Unique oscillatory rotor action ensures high outputs and a predictable product with minimum of fines.

• Driven Type: Electric
• Condition: New
• Material: SS316
• Automation Grade: Semi-Automatic
• Machine Dimension: 710 (L)x 420(B)x 1220 (H)
• Frequency (Hz): 50 Hz
• Voltage (V): 440 V
• Phase: 3 Phase

• Type: Fertilizer Injector
• Application: Agriculture
• Packaging Type: Box

Range 1",1.5" and 2" inlet outlet size with suction capacity of 2100 LPH Standards IS 14483 Part-1 Application To inject fertilizers & chemicals in Micro Irrigation Systems

• Material: CRC
• USE: To Transplant Seeds
• Length: 32 Inch
• Weight: 1.5 Kg
• Diameter: 1.5 Inch
• Opening: 1 Inch

S.p. Enterprise chip spreader attachment suitable to be fitted mounted on the standard truck tipper chassis.

• Brand Name: KENA
• Product Name: Silk
• Dose: 3 to 5 Ml per 15 Ltrs of Water
• Version: Pure Silicon Based

Silk - the Silicon Based Spreader Cum Activator and Deep Penetrator Which Enhace Plant Quality.

• Weight: 30 Kg
• Lifting Capacity: 3.5 Tons
• Minimum pressure required:  80 psi
• Diameter: 6 inch
• Connections: ¼ inch
• Dimension: 40” x 18” x 10”

Benefits   Effective utilisation of manpower – No need of specialised labourNo Maintenance – No oil, no electricity, works totally on air compressorMovablePneumaticFull Puncture unit at one placeEasy access to damage area of tyreNeat and clean systematic workProfitable business in less investment

• Feature: Corrosion Resistance, Easy To Operate, Power Consumption
• Country of Origin: AHMEDABAD
• Application: Construction
• Type: MECHANICAL
• Model Number: SSI-LS
• Condition: FRESH
• Dimension: AS PER REQUIREMENT
• Machine Weight: AS PER SPECIFICATION

We are a leading manufacturer of lime spreader machine operated with tractor make ford. All specifications are are per customer requirement.

We feel immense pleasure to inform you our new launched product i.e. Chip Spreader. It is constructed using the high graded stainless steel plates & square pipes with 12mm and 8mm   It is mounted on standard tipper Spreading width is of 2500mm The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off system.