Filling Line Dealers in Gomtipur, Ahmedabad (75 products available)

For Seaming & Hemming of light to heavy weight fabric such as PPPE Woven cloth. Most suitable for making builder Bags.

• Phase: Single Phase
• Machine main frame: Square Pipe, Stainless Steel 304
• Machine Coverings: Complete in Stainless Steel 304
• Product Contact Parts: Stainless Steel 304
• Non-Contact Parts: Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
• Conveyor Slat: Stainless Steel 304 Slat with Nylon Strips on Side
• Conveyor Shafts: Mild Steel with Hard Chrome or Zinc Plating
• Conveyor Sprockets: Mild Steel or Nylon
• Bearings: SKF / Nachi / Timken
• Plating(Wherever Applicable): ENP / Zinc / Hard Chrome / Blackening
• Capping Unit: Stainless Steel .304
• Bowl: Stainless Steel 304
• Vibratory Bowl Feeder: Mild Steel Cladded in Stainless Steel 304
• Vibrator Stand: Mild Steel with ENP Plating
• Cap Elevator frame (If machine is with Elevator): Stainless Steel 304
• Elevator Belt: PVC
• Shute: Stainless Steel 304
• Support Rod on Existing point of indexing Star wheel: Stainless Steel 304
• Star Wheel with Back Guide: 12 mm thick UHMW / Nylon
• Guide Brackets: Spectra make – Plastic
• Guide Size: 100mm / 150mm
• Guide Rod: Stainless Steel 304 (10mm Round Bar)
• Slat Chain Pitch: 3.5” Stainless Steel 304
• Capping Head Pillar: Mild Steel with ENP / Hard Chrome
• Capping Head Motor Make: 1 H.P Bonfiglioli
• Capping Head Gear Box Make: Bonfiglioli Ratio: 20:1
• Cap Elevator Motor Make (If machine is with Elevator): Bonfiglioli
• Cap Elevator Gearbox Make (If machine is with Elevator): Bonfiglioli Ratio: 20:1
• Capping Head VFD Make: 1 H.P Delta
• Sensor Make: Sick / Leuze / Panasonic
• Proxy: Autonix / Pulset
• “No Cap in Shute Elevator Stop” Sensor (If machine is with Elevator): Panasonic
• Electrical Wiring: Ferrule Numbering on all the wires with Proper Markings
• Electrical Components: ABB / Delta /Spectra
• Pneumatics: SMC / Festo / Janatics
• Air Pipes: SMC / Festo / Janatics
• Wires & Cables: Labb
• Control Panel: Relay Card (Push Button Type )
• Power: 1 H.P / 230 V.AC
• Compressed Air Required: 3 H.P Compressor (6 bar pressure 0.5 CFM)

• Electrical Rating: 0.5 HP
• Power Characteristic: 415 Volts, 3 Phase, 4 Wire system, 50 Cycles/Sec
• Finish/Painted: S.S. Finish / body Painted in Nickle-gray Colour
• Overall dimensions: 890mm (L) x 1170mm (W) x 1270 mm (H)

We offer our clients with a range of ampoules and vials Washing Machines that is manufactured using premium quality components. These are equipped with electrical controls that provide protection to the device against single phasing and motor overload. Further, these are appreciated by our clients for the features like long lasting and rust free finish. Our range of ampoules and vials Washing Machines includes multijet ampoules and vials washing machines. Also Automatic Ampoule Loaders are available with automatic loading of ampoules in combi trays of multijet washing machines that save time. Further, these are precision engineered machines that are compatible with multijet washing machines and are offered at reasonable priceshiv.

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year

We are a reputed Manufacturer, Supplier and Exporter of Diesel Filling Machines from Gujarat. The Diesel Filling Machines offered by us are most suitably used for displaying volume, weight and unit price of the dispensed fuel. Our Diesel Filling Machines are available in 12V and 24V Dc Electric Supply. Courtesy, our brilliant logistics network, we are capable of delivering Diesel Filling Machines in bulk at discounted rates.

We are offering solar led street light 6 to 50wsolar led street light 6 to 50w.

We offer Turn Table. 24"30"36"48"

• Brand Name: Revo
• Material: Mild Steel
• Packaging Type: Pouche
• Automatic Grade: Semi-Automatic
• Application: Pouch Sealing
• Model Number: SCS3HV
• Type: VERTICAL
• Weight: 3 KG

Competencies » Total CGMP model » Frame Made from SS-structure, with height adjustment » Sleek sturdy and compact design » All control from panel. » Left to right and right to left options available Features » Indexing mechanism » No Bottle change parts required » Bottle is stopped under funnel » Powder is delivered to funnel using powder wheel. » Vacuum controlled powder delivery » Very high dosing accuracy » Fully fail safe design Accessories » Dust Collector » Vacuum pump » Powder Loader » Production Counter » Pre-post check-weightier » Pre and post Inspection device Utilities » 415V, 3-phase, 50hz electric supply » Electric load:- 2HP » Air:- 2 CFM @ 4 to 6 kg/cm2 » Vacuum 26”HG, 300LPM FEATURES » Synchronization with Nitrogen purging » Mechanised slug breaker » PLC-HMI touch screen » Integration for Check weighers and inspection devices » Rejection of non-accurate bottles » Monoblock machine for Screw capping/ ROPP Capping APPLICATION » To fill Dry syrup/Powder in containers » Container diameter:- 30 to 100 mm » Container height:- 30 to 150 mm » Dose:-upto 150 gms

AUTOMATIC High Speed LIQUID Vial Filling & VACUUM Rubber Stoppering Machine MODEL: AHVF 4, 6 & 8 Description: High Speed Automatic Vial Filling & Rubber Stoppering Machine suitable for the filling & rubber stoppering of glass vials. Our Automatic Vial Filling & Rubber Stoppering Machine is widely uses in SMALL & large volume injectable preparations. Machine consist automatic feeding, filling, bunging & ejection system all complies as per cGMP requirements. Automatic Vial Filling & Rubber Stoppering Machine can be attached to Vial Washing Machine and Vial Cap Sealing Machine in order to complete online Sterile Vial Filling Line. Machine complies as per GMP requirements. Our standard machine equipped with stainless steel piston pump for the liquid filing, further we can also provide peristaltic pump for higher filling accuracy upon specific customer request. Salient Features: • Suitable for the filling Volume of 2ml to 250ml. • Piston pump/Peristaltic pump aseptic filling. • Filling with accuracy of ±0.5-1% • Filling with accuracy of ±0.5-1%. • All Contact Parts Made from S.S 316L & framework by S.S. 304. • ariable A.C. frequency drive for speed adjustment. • Digital Vial Counter for counting production output. • In-feed Turn Table/ Unscrambler for automatic feeding of objects. • On-line Mechanism. • “No Vial - No Filling” system. • “No Vial - Machine Stop” system. • IQ/OQ documentation can be provided Process Operation: The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both, glass as well as S.S. syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for 'No Vial-No Filling' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation.

. This is a versatile filling machine can be used for water, fruit juice, liquid tea, liquid coffee, food coloring, milk and many more products to fill. Our liquid fillers are designed to handle all types of containers such as glass, metal, plastic. We offer filling machines with advance technology and advance features to our worldwide global clients.

• Type: Labeling Machine
• Condition: New
• Power: 220V
• Driven Type: Electric
• Automatic Grade: Automatic
• Brand Name: Shree Bhagwati Machtech (India) Pvt. Ltd.
• Place of Origin: Gujarat, India
• Service: 24/7 Technical Support
• Machine Type: Bottle Labeling machine
• Customization: Yes
• Business Type: Manufacturer
• Packaging Material: Glass, Metal, Plastic, Pet, HDPE, LDPE
• Model Number: SBSL - 120
• Supply Ability: 20 Unit/Units per Week
• Port: Any Indian Port

We offer precision engineered Automatic Four Head Ampoule Filling And Sealing Machine. These ampoule filling machines are manufactured using high quality components and are offered in customized solutions as per the needs of the clients. Further, these are available with A. C. Frequency drive that provides speed control for digital counter. In addition, we offer these with the pre sealing mechanism, which does not require ampoules or filling. The machine built on principle of Slant travel of ampoules while filling and sealing. to take care of wide variation of ampoule neck dimensions, thicknesses and ovality of available in globe ampoules.

• Air Pressure: 0.4-0.6MPa
• Filling Accuracy: <=±1%

We specialize in deliver custom ointment filling machine that can be used to fill various products like bam, hot balm, molten, wax, lip balm, cream etc in molten condition. We provide machines to fill viscous and semi viscous fluids in various types of containers. The machines are auto piston type that is rational in design, compact with pneumatic components. Our machines are popular providing disturbance free heavy duty performance and available at the most affordable rates.

• Direction of Movement: Left to Right
• Output / Minutes: 100 BPM – Depending on the size of the bottle or the label length
• PLC: Programmable Logic Controller Unit  - DELTA Make
• Touch Screen: Delta Make Touch screen
• Servo Motor: Panasonic  / Delta Make
• Microprocessor: Microprocessor controller by Bhagwati make
• Sensors ( Product / Label ): Leuze – USA  or  Sick Germany make
• AC Drive ( Variable Speed): Delta Make
• All Electrical / Electronic cables: Labb – Germany make
• PLC: Programmable Logic Controller Unit  - DELTA Make
• Electrical Motor: 0.25 HP / 1400 RPM For Conveyor Drive b) 0.25 HP / 1400 RPM for Pressing Device Drive. c) Servo Motor.
• Power Characteristics: 230 Volts AC 50 Hz.
• Construction: Top stainless steel matt finish & S. S. Pipe structure is covered with S.S. 304 sheet.
• Compressor  Air: 4 to 6 Bars. (Only for printing device)
• Input Specifications Round Container Dia.           Label: 25 mm to 80 mm 30 mm to 180 mm Length 16 mm to 100 mm width
• Label Roll Diameter: Max. 400 mm.

• Type: Machine
• Driven Type: Pneumatic
• Automation Grade: Manual

• Voltage: 230 Volts
• Power: 1.5KW
• Certification: An ISO 9001 2000 Company
• Driven Type: Electric
• Brand Name: Shree Bhagwati Machtech (India) Pvt. Ltd.
• Condition: New
• Weight: 300kg
• Type: Labeling Machine
• Application: Apparel, Beverage, Chemical, Commodity, Food, Machinery & Hardware, Medical, Textiles
• Packaging Type: Bottles
• After-sales Service Provided: Engineers available to service machinery overseas
• Port: Any Indian Port
• Place of Origin: Gujarat, India
• Dimension(L*W*H): 2120*860*1570mm

Boretech China, year 2011, fully automatic, 1500 kghr capacity, pet bottles recycling washing line. For conversion pet bottles scrap into pet flakes. Plant is in excellent condition having environment friendly process. Plant is having complete line from pre washing, bale feeder conveyor, hot and turbo washing, dryer, scrapper to pet storage and up to fully automatic packing system. PLC operated panels for controlling the system, Utilities are Thermax 10 Lac kcal thermic fluid heater dual bed wood & pet cock, Compressor ELGI make, 320 KVA Diesel Generator, 800 KVA Transformer and 100 KLD capacity ETP

Product Specification :Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles. The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle. Silent Features : Total Compact c GMP model. All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization. "NO BOTTLE, NO FILL" System eliminates wastage of costly powder. Conveyor driving is through High quality imported Gear motor  Machine speed can be adjusted by A.C. Frequency drive, which is time saving. Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor. Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine. Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation. No change parts are required for any change in bottle diameter from 30 to 120 ml. Imported Gear Motor for Conveyor drive. A.C. Frequency drive for Conveyor drive. "No Bottle, No Filling" System. Pneumatic bottle holding system.

Bottle labeler is operated by rotating the bottle and the label is dispensed and applied at rotation speed for labeling of a bottle. It ensures an accurate, wrinkle-free, smooth labeling. ALSO KNOWN AS MANUAL LABELING MACHINE FOR BOTTLE LABELING MACHINE FOR BOTTLE GLASS BOTTLING LABELING MACHINE LABELING MACHING FOR ROUND BOTTLE SEMI AUTOMATIC BOTTLE LABELING MACHINE

Over the years of experience in the industry, we have been able to provide the customers with a high performing range of Semi Jar Washing, Filling & Capping Machine. Manufactured using superior-grade raw material, modern machinery and latest techniques, the range works on the principle of positive displacement. Extensively demanded in diverse filling & packaging applications, the range is available with the following specifications: Tail cutting arrangement Fill accuracy: less than 1% Output: Up to 20-30 jars/minute Can fill from 3 Grams to 500 Grams with change parts

• Material: Stainless Steel
• Driven Type: Mechanical
• Capacity: 0-500 Pouch Per Hour
• Automatic Grade: Semi-Automatic
• Brand Name: DHRUVESH

We are offering bottle filling machine only for pharmaceutical product. Here you can fill the medicine syrupand then after we made capping machine inbuilt with filling and also available sticker labbeling machine. Which is the totally connected with all three function in one machine.

Our storage unit is inclusive of all required amenities essential for a safe storage of the products. The unit is supervised by efficient personnel ensuring zero damage to the stored items. We are a buyer's best bet when it comes to purchasing Tube Filling Machine. Our company is a promising supplier. GMP Model Hand Operated / Motorized Suitable to fill tubes and cones 0.5 HP 440 volts Motor 5 gm 90 gm per stroke

• Driven Type: Electric
• Power: 1/2 HP
• Voltage: 220 V
• Country of Origin: Made in India
• Dimension: 790 L X 660 W X 1730 H
• Phase: SINGLE PHASE
• Model Name/Number: SC01
• I Deal In: New Only
• Material: MS BODY / SS BODY
• Automation Grade: Automatic
• Capacity: 0.5GM-10GM, 10GM-25GM

We are offering edge folding machine. ‘m&b ‘ make roll type edge folding machines for edging the tin plate body blanks to form hooks for side seams prior to body forming or simple flanging with moderately sharp bends complete with an adjustable gauge.

Advantages … Direct introduction of the melt into the cooling circuit. Closed water cycle. Ideal melt distribution. Variable pellet size from 1 mm to 5 mm. Safe pelletizing process. Moisture content would be as low as 0.05 PPM or less. Automatic tool readjustment. Low downtime & low scrap due to automation. Uniform pellets, Smooth pellet surface. No product oxidization. Dust Free clean environment. Application… Anti Fab Master Batch | Master Batch | Rigid PVC Pipe | Woven Sacks Engineering Compounding | R & D Application | Recycling of PP / PE Polymer to be Processed… Polyolefin ( LLDPE, LDPE, HDPE, PP, HM ) Styrene Polymer (PS, SAN, ABS) Polycarbonates (PC, PET, PBT, PEN) Polyamide (PA 6, PA 66, PA 11, PA 12) No. Model Connected Load Output Capacity 1 MUWP – 250 22 kW Upto 250 Kg/hour 2 MUWP – 500 30 kW Upto 500 Kg/hour

• Voltage: 220V
• Brand Name: Nikita
• Body Material: MS
• Machine Weight: 300-400kg
• Frequency: 50-60Hz