Filter Assembly Dealers in Navrangpura, Ahmedabad

The spun qn filtration cartridge is constructed of thermally bonded polypropylene micro fibers to ensure high efficiency. this thermal bonded micro-fiber construction has minimal fiber release, consistent flow rate and superior filtration performance. It also is not brittle or prone to breakage problems like resin-bonded cartridges. the poly depth cartridge will not impart taste, odor or color to the liquid being filtered, which makes it ideal for food and beverage applications. The recommended temperature limit of 4.4° c to 70° c allows it to be used in many hot water applications. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack. spun qn cartridges are available in various micron ratings including 0.5, 1, 5, 10, 25, and 50 microns.

• Country of Origin: India
• Material: Polypropylene
• Shape: Round
• Application: Filter Use
• Moc: Polypropylene
• Size: 10
• Micron: 0.2,0.45,1,5,10
• Item: Pp Pleated Filter Cartridge

• Type: Reverse Osmosis
• Material: Plastic
• Size: Standard
• Brand Name: Unitech
• Cartridge Size: 20"x4.5"
• Range (Microns): 5
• Features: Anti-corrosive, User friendly, Compact design and convenient to install

• Country of Origin: Made in India
• Color: Available In White & Yellow
• Feature: Low Maintenance Cost, Practical Efficiency Very High, Possibility of Heat Recovery Very Good
• Application: Dust Filter

The initial operation of a membrane filter press is identical to that of its recessed chamber counterpart. However once the filtration cycle is complete and final filtration pressure is achieved the feed into the filter press is stopped. At this point the plates within the Filter Press can be inflated using either air or hydraulic pressure to exert a mechanical force on the filter cake retained in the chamber. The effect of the squeeze is to physically compress the filter cake and force out additional moisture held within the cake giving a drier end result.

Our firm offers a complete range of Pleated Dust Collection Bag that is commonly used in the field of dust collection system. These bags are made from 100 per cent Spun Bonded polyester media with various coatings on it. Then this spun bonded media are pleated in different pleated depths & heights to accommodate filtration area according to the demand. It offers surface filtration which makes pleated bags to offer high throughput & lower pressure drop across the filter compared to any conventional tube type filter bags. Pleated configuration offers almost 3 to 4 times higher filtration area in comparison to conventional bags.   Construction: Pleated spun bonded polyester filter media is basically placed in a cylindrical configuration with support cage of Galvanized / stainless steel / Polypropylene & encapsulated with EPDM / Natural rubber / Polyurethane or metal end caps to form a pleated dust collection bag Longitudinal joints of pleated bags are ultrasonically fused for leak proof & very stable design The end caps are configured to mount as clean side or dirt side fitments In case of metal caps these bags are supported with soft sponge rubber or snap band cuff sealing to ensure positive sealing of filter while fitments

We bring all kinds of ptfe filter cartridge. We are a famous ptfe pleated filter cartridge supplier. We have up-to-date quality of all type of filter cartrige. make of construction ptfe cartridge filtration media : teflon media support : polypropylene end caps : polypropylene core : polypropylene outer cage : polypropylene pes cartridge filtration media : polyethersulfone media support : polypropylene structure components : polypropylene sealing technology : thermal bonded available different size length : 10", 20", 30", 40" diameter : 2.7" micron size : 0.2, 0.45 end conn. : doe , code - 7 type typical application pharmaceuticals & biological parenterals, ophthalmic, oral and topical medicines, water, serum, tissue culture media, vaccines, make - up water, fermentation additives. food and beverages alcohols, juices and other potable, mineral water, di & ro water, dry compressed gases.

Bag Filter Housings are used in a variety of applications where the filter is to be designed for high flow rate and high dirt holding capacity. They are particularly useful for applications where there is high suspended solid load in the fluid and high flow rate. Various parts of Bag Filter Housings are Filter Bag, Internal Cage to support cage, sealing arrangement and end connection. Bag Filters are used as Pre filter to Cartridge Filters to remove the coarser suspended particles which increases the life of cartridge filter.   TECHNICAL SPECIFICATIONS   FEATURES Housings are available of various MOCs like SS 304, SS 304 L, SS 316, SS 316 L, which are mirror polished and also of Carbon steel which are sand blasted and epoxy coated. High dirt holding capacity of filter bags Easy to handle Low pressure Drop High Filtration Area High temperature and high pressure customized designs are also available. Flow rate up to 2000 m3/Hr Easy to open and replace bags   TECHNICAL SPECIFICATIONS Sizes:- SingleBag Filter system suitable for Ø 4” x 10” Long Filter Bag Ø 4” x 17” Long Filter Bag Ø 7” x 7” Long Filter Bag Ø 7” x 32” Long Filter Bag Multiple Bag Filter system suitable for 02 Nos. of Ø 7” x32” Long Filter Bag 03 Nos. of Ø 7” x32” Long Filter Bag 04 Nos. of Ø 7” x32” Long Filter Bag 05 Nos. of Ø 7” x32” Long Filter Bag 06 Nos. of Ø 7” x32” Long Filter Bag 07 Nos. of Ø 7” x32” Long Filter Bag 08 Nos. of Ø 7” x32” Long Filter Bag   Material of construction:- SS 304, SS 304 L, SS 316, SS 316 L Carbon Steel, Mild Steel Duplex SS, Super Duplex Stainless steel End Connections:- Flanged NPT/BSP threaded DIN Standard TC Connection SMS/Dairy Connection APPLICATIONS Water applicationsPaintsInksEdible OilsSugar SyrupPolymersVarnishesPharmaceuticals

• Material: SS
• Country of Origin: Made in India
• Usage/Application: Filter
• Capacity: 10L/min
• Temperature: 45 Degree C
• Flow Rate: 1000 m3/hr
• Material Grade: SS304
• Internal Diameter: 30mm
• Outer Diameter: 70mm

• Brand Name: Filter Concept
• Supply Ability: As Per Requirement
• Place of Origin: Gujarat, India
• Port: Any Port In India

Filter Concept Pvt. Ltd. is one of the leading Spun bonded filter cartridges exporters. Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants.

Filter concept pvc filter housings combine design simplicity with high filtering quality. Pvc filter housings offers wide range of flow capacities & contaminant holding capacities.

Filter strainers Hydraulic & Lube Oil Filtration Segment with removal of suspended particles from oil. It deals with high pressure filtration requirement.

10” to 40” cartridge length Micron ratings from 0.5 to 25 SS304 / SS316 / SS316L materials 2.5” outer diameter Double Open End (DOE) / 222 and 226 Single Open  End (SOE) Special sizes can be offered

Filter Strainers, Filter Housings, Filter Cartridges, Filter Bags

membrane filter plate, Fully Automatic Filter Press, Filter Plate

CE, IP67/IP68 STANDARD  Entirely made of AISI 316 stainless steel* Cylindrical body enclosed by two 9mm-thick circular flanges* 2 PG13, 5 cable glands nickel-plated brass for external connections* IP68, submersible up to -50m (-130ft), equal to 5 BAR max pressure* Accessories available: sun shield, heater kit and double power heater (for temperature down to -40°C (-40°F), camera power* Usable area (WxHxL): 88×86×334mm (3.5×3.4×13.1in) * supply, air barrier + filtering group, wiper and washer General * Made of stainless steel (Austenitic alloy stainless steel, corrosion and heat resistant according to the following standards):- UNI 6900-71: X 2 Cr Ni Mo 17 12- AISI: 316L DIN 17006: X 2 Cr Ni Mo 18 10- N° WERKSTOFF: 1.4404 AFNOR: Z2 CND 17-12- BSI: 316 S 12* The screws utilized are in austenitic alloy stainless steel, corrosion and heat resistant according to the following standards:- UNI 6900: X 5 Cr Ni Mo 1712- AISI: 316- ISO quality: A4- Resistance class ISO: 80* Supplied with instruction manual, desiccants bag, accessories for camera and lens mounting* UNI: Ente Nazionale Italiano di Unificazione, AISI: American Iron and Standard Institute, DIN: Deutsche Industrie Normen, AFNOR: Association Française de Normalization, BSI: British Standard Institution, ISO: International Organization for StandardizationMechanical * 2xPG13.5 cable glands in nickel-plated brass for external connections* External body polishing* 9mm (0.35in) thick front and back flanges* O-ring gaskets Tempered window glass: 4mm (0.15in) thick, Ø 97mm (3.8in)* External dimensions: Ø 154mm (6in) length 370mm (14.5in)* Internal usable area (BxH): 88x86mm (3.4x3.4in)* Internal usable area with double heater (BxH): 55x100mm (2.2x3.9in)* Internal usable length* NXM 334mm (13.1in)* Internal usable length with heater and/or power supply* NXM 245mm (9.6in)* Wiper* Wiper blade and enclosure made of AISI 316 stainless steel* Dimensions (ØxL): 100x169mm (3.9x6.6in), not comprehensive of blade* Connector 3+1 pins* IN 230V AC, consumption 7W max* IN 24V AC, consumption 7W maxCompliance To * NXM* CE according to EN 61000-6-3, EN 60065, EN 50130-4* IP68 according to EN 60529 IP66/IPx8 (5 Bar for 48 hours)* VIPNX* CE according to EN 61000-6-3, EN 60065, EN 50130-4* IP67  

fiber glass filter cartridge, Coolant Filter, Compact Band Filter

filtration unit, reverse osmosis frp vessel, reverse osmosis dosing pump