Filter Housings Dealers in Navrangpura, Ahmedabad

We are offering atlas filtri filter housing dp for cartridges sx and bx. Dp is a full range of housings for cartridge height at 5'', 7'', 10'' and 20'', especially designed to fit to both standard sx (doe) cartridges and to bx cartridges with 45 mm double o-ring collar. Exclusive mono, duo and trio patented and registered models are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. Dp housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), gost (russia). With female inout configurations from 14'' up to 1''12, with bsp or npt threads, with or without brass inserts, and with male inout configurations at 12'', 34'' and 1'' with bsp threads dp housings are suitable for every point-of-use (pou) and point-of-entry (poe) application, as single- or multi-stage on-line filters, under-sink filters, reverse osmosis pre-filtration units. A wide range of combinations with clear and opaque bowls and colored heads make it possible to respond to every custom requirement upon minimum quantity. Every housing is provided with filterfit, the centering device which holds cartridges perfectly standing into the housing. Dp 10 mono housings for cartridges 10'' and 20'' are available also as s models with discharge valve and self-cleaning performance. S models can be used with kit auto for automatic flushing and self-cleaning. Dp mono housings are available also as m models with 2 manometers. A full set of accessories is available on demand to complete the housings kit: wall brackets for mono, duo and trio models, opening spanner, standing bases and brass or plastic nipples with o-ring.

We are one of the leading FRP | GRP Filter housing manufacturer & exporters. Filter Concept Offers Corrosion resistant Fiber Reinforced Plastic (FRP) Filter housing to meet the demanding needs of industry to Filter corrosive and non-corrosive fluids for various applications including Chemicals, Oil and Gas, Petrochemical, Power Generation, Desalination, Potable Water, Municipal and many more Industries. Operation : Contaminated fluid enters the housing and is distributed evenly around the filter cartridges/Filter Bags. Filtration takes place from outside to inside or Inside to outside depending upon flow patterns. Solids are collected on the outside of filter cartridges or Inside of the Filter Bags & clear filtrate is collected at outlet.     Special Options Customized design available Positive sealing arrangement to avoid bypassing ASME Designs available Sizes (FRP/GRP filter housings suitable for Cartridge Filter) 1 No. To 250 Nos. Of Cartridges in Single Housing 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge 10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge Sizes (FRP/GRP filter housings suitable for Bag Filter) FRP/GRP Bag filter system suitable for Ø 4" x 10" Long Filter Bag Ø 4" x 17" Long Filter Bag Ø 7" x 17" Long Filter Bag Ø 7" x 32" Long Filter Bag Multiple bag filter system suitable for 2 Nos. Of Ø 7” x 32” Long Filter Bag 3 Nos. Of Ø 7” x 32” Long Filter Bag 4 Nos. Of Ø 7” x 32” Long Filter Bag 5 Nos. Of Ø 7” x 32” Long Filter Bag 6 Nos. Of Ø 7” x 32” Long Filter Bag 7 Nos. Of Ø 7” x 32” Long Filter Bag 8 Nos. Of Ø 7” x 32” Long Filter Bag 9 Nos. Of Ø 7” x 32” Long Filter Bag Flow Rate Capacity: Up to 1000 m3 /hr & more Material Of Cunstruction {M O C} Fiber Reinforced Plastic ( FRP) Glass fiber Reinforced Plastic ( GRP ) POLYPROPYLENE Cartridge filter housing suitable for filter cartridges of Double Open End (DOE) Type Code 7 (226 O' Ring) Design Code 3 (222 O' Ring) Design NPT Threaded Connection Type Gasket / O Ring Material Neoprene Nitrile Silicone Viton Buna N EPDM PTFE Spiral Wound CAF End connections available NPT / BSP Threaded Flanged Table E / Table F ANSI B 16.5 Flanged DIN Standard

CE, IP67/IP68 STANDARD  Entirely made of AISI 316 stainless steel* Cylindrical body enclosed by two 9mm-thick circular flanges* 2 PG13, 5 cable glands nickel-plated brass for external connections* IP68, submersible up to -50m (-130ft), equal to 5 BAR max pressure* Accessories available: sun shield, heater kit and double power heater (for temperature down to -40°C (-40°F), camera power* Usable area (WxHxL): 88×86×334mm (3.5×3.4×13.1in) * supply, air barrier + filtering group, wiper and washer General * Made of stainless steel (Austenitic alloy stainless steel, corrosion and heat resistant according to the following standards):- UNI 6900-71: X 2 Cr Ni Mo 17 12- AISI: 316L DIN 17006: X 2 Cr Ni Mo 18 10- N° WERKSTOFF: 1.4404 AFNOR: Z2 CND 17-12- BSI: 316 S 12* The screws utilized are in austenitic alloy stainless steel, corrosion and heat resistant according to the following standards:- UNI 6900: X 5 Cr Ni Mo 1712- AISI: 316- ISO quality: A4- Resistance class ISO: 80* Supplied with instruction manual, desiccants bag, accessories for camera and lens mounting* UNI: Ente Nazionale Italiano di Unificazione, AISI: American Iron and Standard Institute, DIN: Deutsche Industrie Normen, AFNOR: Association Française de Normalization, BSI: British Standard Institution, ISO: International Organization for StandardizationMechanical * 2xPG13.5 cable glands in nickel-plated brass for external connections* External body polishing* 9mm (0.35in) thick front and back flanges* O-ring gaskets Tempered window glass: 4mm (0.15in) thick, Ø 97mm (3.8in)* External dimensions: Ø 154mm (6in) length 370mm (14.5in)* Internal usable area (BxH): 88x86mm (3.4x3.4in)* Internal usable area with double heater (BxH): 55x100mm (2.2x3.9in)* Internal usable length* NXM 334mm (13.1in)* Internal usable length with heater and/or power supply* NXM 245mm (9.6in)* Wiper* Wiper blade and enclosure made of AISI 316 stainless steel* Dimensions (ØxL): 100x169mm (3.9x6.6in), not comprehensive of blade* Connector 3+1 pins* IN 230V AC, consumption 7W max* IN 24V AC, consumption 7W maxCompliance To * NXM* CE according to EN 61000-6-3, EN 60065, EN 50130-4* IP68 according to EN 60529 IP66/IPx8 (5 Bar for 48 hours)* VIPNX* CE according to EN 61000-6-3, EN 60065, EN 50130-4* IP67  

Ami enterprises is one of the foremost polypropylene housings manufacturers, presenting polypropylene filter housings. We are one-stop-shop from where you can browse wide range of pp filter housings which are widely used in many construction purposes. Reliability and durability are some of the salient features of our products. We aim to provide superior quality products at the most reasonable price. technical data wide chemical compatibility working pressure : 3 to 4 kg working temperature : 60° to 70°c available in big diameter of 5” (big blue type). available different size length : 10” , 20”. end connection : ½” , ¾” , 1” , 1 ½” housing type : slime type , big blue type. make of construction polypropylene polycarbonate san available in opaque & transparent application chemical industry cooling water pre – ro beverage facility recycling ice rock supply system

Polypropylene filter Housings are generally used in corrosive/saline liquid processing.Most of the water and waste water treatment plants and continues process industries. It is highly economical in price, light weight, durable and compact design.Considering the varied needs and applications of the end users, our products are customized to fulfill the application criteria. Polypropylene Filter Housings at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders of Polypropylene Filter Housings from Ahmedabad, Gujarat, India.   FEATURES AND BENEFITS Compact Construction Filtration Rating upto 200 micron Easy to handle and maintain Can accommodate Cartridges and Bags

Filter concept offers corrosion resistant fiber reinforced plastic (frp) filter housing to meet the demanding needs of industry.

• Packaging Details: Standard Export packing
• Model Number: FCPL
• Place of Origin: Gujarat, India
• Supply Ability: As Per Requirement

• Material: SS
• Country of Origin: Made in India
• Usage/Application: Filter
• Capacity: 10L/min
• Temperature: 45 Degree C
• Flow Rate: 1000 m3/hr
• Material Grade: SS304
• Internal Diameter: 30mm
• Outer Diameter: 70mm

metallic filter housings, nonmetalic filter housings

Filter Housings, Filter Cartridges, Filter Bags, Filter Strainers

Cartridge Filter Housing, HEPA Filters, Air Intake Filters, strainer filter

Big Blue Filter Housing, RAW WATER PUMP, ro vessel