Filters Dealers in Shahpur, Ahmedabad

• Application: Automobiles, Industries
• Weight: 100-200gm, 200-300gm, 300-400gm
• Feature: Durable, Light Weight, Perfect Filtration
• Features: Precisely designed , Easy to install, High filtration efficiency

The initial operation of a membrane filter press is identical to that of its recessed chamber counterpart.   However once the filtration cycle is complete and final filtration pressure is achieved the feed into the filter press is stopped.   At this point the plates within the Filter Press can be inflated using either air or hydraulic pressure to exert a mechanical force on the filter cake retained in the chamber.   The effect of the squeeze is to physically compress the filter cake and force out additional moisture held within the cake giving a drier end result.   Membrane filter plates are used to   Reduce filter cake moisture content Reduce filtration cycle time Improve cake washing   This style of filter plate can be installed as   A full plate pack Alternately in conjunction with recessed companion plates as a more economical option.   Because of its simplicity and flexibility, the chamber Filter Press has been widely applied in clarification and dewatering applications. Membrane Filter Press technology is gaining increased acceptance because it reduces subsequent processing or disposal costs for filter cake. In many applications the membrane Filter Press significantly reduces residual moisture content, making this technology attractive for new plants and for upgrading existing facilities. In both cases the careful selection of plate and membrane materials is essential to the successful performance of the process.   Membrane Filter Press Plates have a chamber below the drainage surface that can be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Membrane Plates are used to reduce the cake moisture content & shorten the filtration cycle time.   Mix Pack Membrane are the most common configuration (one recessed plate then one membrane plate alternate in the press plate pack). Membrane Plates usually operate at a feed pressure of up to 7 bar and squeeze pressure up to 15 bar. Special plates can be designed for higher feed & squeeze pressure.   Replaceable membranes can easily changeable. EPDM thermoplastic and other compounds are used for specific conditions. Plate filling problems are minimized and use of a rubber Membrane enables “empty-chamber” operation without damaging the plate, resulting a considerable reduction in incidents of plate failure. Even if the chamber is not completely filled, the filter cake is squeezed by the inflating filter lever and therefore perfectly dewatered.   During the initial phase of the filtration cycle, so-called “fill and filtration” the process is similar to the chamber Filter Press. After reaching a predefined pressure, usually around 3 - 7 bar, depending on the sludge characteristics, sludge feeding is stopped & the rubber membranes inflated, using either water or air as squeeze medium. The cake is hereby compressed and dewatered further. Then the squeeze medium is relieved & the cake discharged.

• Material: Metal
• Color: Silver
• Application: Automotive Industry
• Feature: Easy To Install, Gud Quality, Rustproof
• Type: Ac Filter
• Max Flow: 0-50cfm
• Country of Origin: India

Ceramic foam filters are increasingly being used in aluminum industry these days. These are special filters made using materials like silica carbide and aluminum oxide to give them structural stability and to ensure resistance to thermal shocks. Ceramic foam filter is able to remove oxides from the surface of aluminum and thus increase casting quality. More and more aluminum sheets and foil manufacturers are today using these filters. Galaxy Enterprise is one of the biggest foundries as manufacturers of ceramic foam filters products in India as well as global industrial market. The company supplies these high quality filters to its clients involved with the production of aluminum sheets and foils.

• Brand Name: Elcom
• Voltage: 120-250 V AC
• Frequency: 50/60 Hz
• Operating Temperature: -25 to +85 deg C
• Features: Double stage, Chassis mounting, High reliable, High performance ,Connections input & output with bus bar terminals.
• Model: C08 Package
• Current: 10-40 A
• Insulation Resistance: 300 Mohm
• Dimension: 113 x 56 x 44.5 mm

Water treatment plants are essential because the several types of impurities present in water are extremely harmful to the health of human and animals. Also, they cause damage to the environment as well. Organic matter, turbidity, and several other types of impurities can be removed by dual media filters. They may or may not remove the dissolved solids completely, but there is a sure reduction in the concentration of solids because water softens after filtration.

• Pipe sizes: 20 – 150 mm (¾" – 6")
• Max. pressure: 50 bar (725 psi)
• Max. temp: 200 °C (392 °F)
• Materials: cast iron, cast steel,

TopFilter TFOV Single filter Connections Threaded: BSP, NPT Flange: BS10, BS4504, ANSI, DINgunmetal, stainless steel

• Material: SS
• Diameter: 4 Inch
• Flow: 500 m
• Length: 10 Inch
• Usage: Oil Filter
• Usage/Application: Oil Filter

• Chemical Composition (Nominal) :: Cu - 89 % Sn - 11
• Density :: 5 - 6.5 gm/cc
• Porosity By Volume :: 30 - 45 %

We produce very high quality Sintered Bronze Porous Filter element. For the Filtration purpose of Liquids & Gases. It is made by Powder Metallurgical method. It is produce from spherical Bronze Metal Powders of closely controlled particle size to give a rigid porous bronze structure of uniform pore dimension.

Disc type self-cleaning filter is constructed of filter housings, filter elements, and drain valve. It also has a pneumatic cylinder and timer-based drain valve.

• Shape: Conical
• Country of Origin: Made in India
• Usage/Application: Industrial
• End Connections: TC END / SMS END
• Gasket: Silicon

Filter Concept Pvt. Ltd. is one of the leading Gas Filters exporters. We offer a range of gas filtration systems for removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. Filtered gas results low down time & reduces the production loss. These filtration systems are designed depending on their flow requirement, line size, working pressure, working temperature & level of filtration rating. Filter housings can be made of SS 316, SS 304, carbon Steel or aluminum. Filter elements are made of varieties of selective fiber media to achieve desired filtration level. We offer replacement of existing vessels and new design vessels. These are made as per the process requirement to offer high filtration area, lower pressure drop & extended service life of filter element. These filters are available in customized design & capacity to meet particular process parameters. Filter housings for these filters are available in standard design codes like ASME SEC VIII DIV I & other pressure vessel design code stamped upon special request. TThese filters are further classified in three different categories » Particle removal filter (For removal of dirt, dust, rust & other metal particles up to 1 micron) » High efficiency filter (For removal of oil & moisture contents and fine particles up to 0.01 micron) » Carbon filter (For removal of oil vapour, test & odour)   We have wide expertise and knowledge in the manufacture and export of world-class gas filters Specialized in application analysis.Our endeavours in this field is backed by a strong R & D support and our own vast experience in dealing with the OEM & End Customer in the various industries like Oil & Gas, Petrochemicals, Power, Steel, Chemicals, Pharmaceuticals, Fertilizers, Dyes & Intermediates, Paint & Ink, Water Treatment etc. » Gas Filters For Natural gas filtration » Gas Filters For CNG & LPG Gas filtration » Gas Filters ForOxygen Gas » Gas Filters For Nitrogen Gas » Gas Filters For H2S Gas

We are recognized as one of the prominent companies of a wide range of Candle Filter that is normally called as candle filter elements offer advantage of being able to be cleaned and re-used. Offered filter is assembled in proper lapping to remove operator error. Provided filter is widely used in lamination & multilayer film plants and obtainable as per mesh combination / diameter / length. Our organization has gained a wide recognition as a prominent organization to offer our clients the superior quality range of Candle Filter. Owing to its long life, sturdy nature, and fine quality, this product is globally admired amongst our esteemed customers. Moreover, to uphold its quality we stringently test this product prior to its final dispatch. Features  Strong nature Water resistance Highly durable Fixed candles with replaceable filter Static equipment

We are offering self cleaning filter. Filter concept inc. Offering a wide range of self cleaning filter in india.

We are a unique name in the industry to our precious clients an exclusive range of Water Filter System. The offered machine is extensively used to treat surface water and ensures good flow, fresh and pure water. The machine provided is manufactured by our skilled experts using premium grade components. Furthermore, it can be availed by our client at reasonable price from us.Features:Easy to installUser friendlySuperior functionality  

Compact filter with screw mountable IEC inlet connector. Voltage : 250VAC Application : Electronic test and measuring instruments and medical instruments. Phase : Single Current : 1A - 15A

• Material: Polyurethane
• Efficiency: 95.00%
• Usage In: Three Wheeler
• Features: High Durability
• Filter Type: Air Filter
• Working Temperature: 10 to 50 degree C

• Brand Name: Filter Concept
• Place of Origin: Gujarat, India
• Supply Ability: As Per Requirement
• Packaging Details: Standard Export Packing

• Material: Metal
• Size: 8 to 16 inch
• Type: Thermal Fluid Filtration
• Mode: Manual , Semi - Automatic
• Minimum Order Quantity: 1 Unit