Finned Tubes Dealers in Ahmedabad

Backed by our eminent workforce, we are able to manufacture, supply and export finest grade Helical Tension Wound Finned Tubes. These Helical Tension Wound Finned Tubes are appreciated by our clients for their durability, dimensional accuracy and excellent finish. The offered range of Helical Tension Wound Finned Tubes is manufactured by our dedicated workforce following set manufacturing procedures. Moreover, these Helical Tension Wound Finned Tubes are tested on certain well-define parameters set by the industry to make sure zero manufacturing defects.   Features : Dimensionally accurate Robust construction Durable Corrosion resistant

• Material: Copper, Aluminium
• Thickness: 0-5mm, 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Length: 1-5Mtr, 5-10Mtr
• Application: Industrial
• Color: Brown, Golden
• Condition: New, Used
• Outer Diameter: 10-20mm, 20-30mm, 30-40mm
• Feature: Durable, Eco Friendly, Heat Resistance, High Strength, Purity
• Single Piece Length: 6 meter

• temperatures: 300 Deg C.

Extruded Fin Tubes are heat exchanger tubes mainly required to transfer heat from a flowing fluid and cooling it down by passing air on the fins of the tubes. In extruded fin tubes the surface area of heat transfer is increased because of the increased height of the fins thereby causing it to become more exposed to the flowing air. Moreover in this process the thickness of the fin is also very low causing the heat transfer to become more efficient. The extruded fin tubes are used mainly where the atmosphere is corrosive and the heat transfer required is higher. Extruded fin tubes are mainly manufactured by extruding fins from the base material itself. It is generally manufactured using bimetallic combinations where the base tube can be made of Carbon Steel, Alloy Steel, Stainless Steel, etc and the fin material is Aluminum or Copper etc.

DhanLaxmi Tubes has excelled in providing high quality integral low copper fin tubes suitable for the situations which require extended surface but the space availability and type of heat exchanger dictate otherwise because of their enhanced surface fin tubes provide better heat transfer performance which allows our customers to either reduce the size of the heat exchanger or increase its performance. Fin tubes are available in tube diameters upto 19.05 mm OD, with wall thickness of 1.00 mm and above. The fin density ranges from 19 fins per inch to 26 fins per inch. The copper fin tube we manufacture are designed to meet the most efficient and durable thermal performance for the most challenging situations and long lasting service life. Depending upon the specific requirement tube ends as well as a portion on its middle may be left unfinned for fixing the tube on the tube plate.

• Material: Stainless Steel, Mild Steel, Carbon Steel, Galvanized Iron, Aluminium
• Size: 1/4 inch-1 inch, 1 inch-2 inch, 2 inch-3 inch, 3 inch-10 inch
• Type: External Finned Tubes, Spiral type crimped finned tubes.
• Unit Length: 3m

• Application: Refrigeration Parts
• Type: Heat Exchanger Tube
• Place of Origin: Gujarat, India
• Supply Ability: 15000 Kilogram/Kilograms per Month
• Port: Nhava Sheva

These finned tubes are used where air is corrosive or having more moisture. This gives longer life of Finns. After making complete finned tubes it is cleaned to remove oil, rust & any other impurities & then dipped into molten bath of zinc. This process is costly.

Extruded Aluminium Fin Tubes(bimetallic Fin Tube), Helically Wound High Fin Tubes 'G' Fin (also called "Embedded Fin" or "Edge Grooved Fin") 'L' Fin(Also called "shoulder Tension Fins","Wrap on Fins"), 'KL' Fin (also called knurled 'L' Fins) Integral Low Fin Tubes

Continuous type spiral fin tubes with crimped fins gives 80 % high efficiency than bare tube . More over it is wound with tension which gives rigid grip. This is the most commonly used fin tubes for industrial purpose. Having low cost & high efficiency. Material of base tube is M.S. S.S.CopperAluminum brass etc. Commonly used fin material is M.S.S.S.CopperAluminum etc. Common bare tube size is 38” to 4” size. Fins per inch will be from 6 to 9.

• Power Source: Steam
• Material: MS
• Color: Silver
• Length: 2 ft
• Part Type: Exchanger Tube
• Usage/Application: Induction Heater
• Shape: Round

• Material: Copper
• Usage/Application: Industrial use
• Diameter: 1/2 inch, 1 inch
• Unit Length: 1/2-1 mtr

Ss fin tube, stainless tubes, Stainless Steel Capillary Tubes

Helical Tension Wound Fin Tubes, Corn and Paddy Dryer 40 Ton, heat radiator

Finned Tubes, tubes, Tube Fittings

Copper Fin Tubes, Copper Tubes, Copper Tapes, Copper Strips, sections

Low Fin Tube, Heat Exchanger Tubes, Mechanical Tubes, Hydraulic Tubes

Finned Tubes, Radiators, Heating Radiators, Car Radiators

Fin Tubes, Air Blower, Heat Exchanger, oil heat exchanger, idfd fans

Spiral Fin Tube, Printed Shrink Sleeves, pvc heat shrink preform caps