Fire Systems Thaltej, Ahmedabad, Gujarat

As the name suggests, the extinguisher is filled with a liquid and a chemical that when released creates a foam discharge. The foam smothers the fire and starves the fire of oxygen. Not only can a foam extinguisher be used on combustible A Class fires, which are wood, paper, cloth etc. However, it can also be used on flammable liquid type fires.

FM200 Fire Suppression is a suitable agent for normally occupied spaces. FM200 fire suppression systems are commonly used in:   DATA Centres Comms Rooms Telecommunication facilities UPS Rooms Medical facilities   FM200 works by removing heat from a fire so that combustion cannot be sustained, its unique characteristics also prevent re-ignition. FM200 does not remove the oxygen level to a point where it is unsafe for occupants to remain in the room. Following a fire, the gas may be dispersed through natural ventilation, which is made possible as FM200 does not have any toxic side effects and because it contains neither bromine nor chlorine, it has no detrimental effect on the earth’s ozone layer. The gas is discharged through a piping network into the protected area, where it is applied to extinguish the fire. FM200 extinguishing agent is electronically non-conductive and non-corrosive, It leaves no oily residue or deposits to damage software, data files or communications equipment, therefore the clean-up time and costs after discharge are minimal. FM200 fire extinguishing agent is stored in cylinders as a liquid, pressurised with nitrogen it requires only a small storage space. FM200 is also known as HFC227ea. HFC227ea (FM200) fire suppression is also a widely accepted replacement for Halon 1301.   FM200 Benefits   Colourless, odourless, non-contaminating gaseous fire protection Designed to protect critical assets and processes without damaging them Safe to use in occupied areas Proven in thousands of successful installations around the world Hygood quality & technical/service support   Fire Systems can Supply and Install FM200 Systems of UTC Kidde, UTC Chemtron, FIKE or Siemens. Fire Systems also provide AMC of Fire Suppression System.     

The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings. All in all, a compact, high performance, feature rich, economical fire alarm control panel designed to help both the installer and the end user.The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality. The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. Simply fix the control panel to the wall, connect the field wiring, power up and in as few as five button presses you can have a compliant, working fire alarm system. The panel’s large graphical display provides a clear menu structure making the whole initial set-up process quick, clear and intuitive. DXc range Morley-IAS addressable fire alarm control panels are available with large blue LCD display and support user to create 40 to 80 zone alarm with option to upload company logo.  DXc1 (1 Loop fire alarm control panel) , DXc2 (2 Loop fire alarm control panel) and DXc4 (4 Loop fire alarm control panel) addressable fire alarm control panel supports Apollo (Xplore, XP95 and Discovery), Hochiki (ESP) & System Sensor protocol devices. Additionally, programming the control panel couldn’t be easier. Complex configuration can be achieved by using either the panel’s mobile phone style key pad or by using the Windows PC programming tool supplied with the panel. The flexible PC programming tool also allows text messages for devices or zones to be imported from an Excel spread sheet, saving further time. + User Interface:   • Display: 6x40 character (240x64 pixels) blue liquid crystal display with backlight illumination • Control Keys: Evacuate, Silence/Resound, Mute Buzzer, Extend Delay, System Reset, Show Alarm Zones • Programmable Keys : 2 independent programmable function keys and LED indicators • Programming Keys : 12 button alpha numeric key pad inccluding cancel and return keys plus 4 navigation keys and an OK key • Indicators: Fire, Fault, Disablement, Test, Buzzer Muted, Delayed Mode, Sounders Silenced, sounders Disabled and Power. Also dedicated fault LEDs for System Fault, Supply Fault and Earth Fault. 40 or 80 LED fi re zone indicators optional.   + Networking Features:   • Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops) • True peer-to-peer and fault tolerant network for high system reliability  • BS5839 part 1 compliant network   + Panel Features:   • Optional 40 or 80 zone alarm LEDs • Easy 5 key-press set-up • Large blue LCD display • Supports USB upload/download • Mobile phone style keypad and navigation keys • Option to upload a company logo   + Software Features:   • PC confi guration software (supplied with panel) • 80 fi re zones (can be used with or without LEDs) • 7 day timers • Event logging • Onboard diagnostics • Class change function • Coincidence and verifi cation detection for false alarm management • Sensitivity adjustment e.g. between day and night • Input/output logic   + Hardware Features:   • Battery backed real-time clock (2 & 4 loop) • 2 independent sounder circuits • 500mA multi-protocol loop driver • 2 x onboard monitored inputs • Optional programmable keyswitch for selected functions • Plug-in connectors

ABC Dry Powder extinguisher that can be used on different types of fire. This type of extinguisher is described as multipurpose for this reason. This type of extinguisher extinguishes the fire by covering the affected area with a dry powder and acts in a similar way to a fire blanket or sand. The fire is extinguished, due to the lack of oxygen. This method also has the ability to keep a fire from restarting. However, you have to be careful where you use this type of extinguisher, remember a powerful jet of powder will be expelled from the unit, therefore, if used in a small area or an escape route, it could impair visibility and affect the eyes. 

The correct type of extinguisher to use on an electrical fire would be a CO2 type extinguisher. This type of extinguisher works by displacing the oxygen near the fire and this, in effect, smothers the fire. You will usually find a CO2 extinguisher 2kg or 4.5kg, not too far away from electrical equipment. CO2 extinguishers jet out the CO2 at high velocity and you may see particles of dry ice as the mist jets out. The big advantage of using this type of extinguisher on electrical equipment is that it does not leave any residue and therefore, does not usually damage sensitive electrical equipment such as computers.

Clean Agent portable fire extinguishers are used to protect the contents of the structure, high-value assets, and business continuity. These clean agent portable fire extinguishers are safe for people, safe for assets, and environmentally preferred.   Clean Agent portable fire extinguishers are safe for use on Class A, B, and C fires. The clean agent portable fire extinguishers contain FE36 agents that are electrically non-conductive and non-corrosive. There is no residue left behind. It’s business as usual with no collateral damage.