Flanged END Valve Dealers in Naroda, Ahmedabad

We manufacture two way ball valves from 12" to 16" classes : 150# to 2500# material : cast iron, wcb, cf8, cf8m, non-ferrous, duplex, etc.

• Brand Name: Fireflow
• Material: Cast iron
• Color: Sky Blue, Dark grey
• Application: Oil Fitting, Water Fitting, Other
• Size: 25mm-200mm
• Feature: Good Quality
• Weight: 10-20kg
• Country of Origin: India
• Condition: New
• Pressure: High, Medium
• Type: Three Piece Ball Valve

We are main supplier of this product.

Delson India Is The Best 3 Piece Flanged Ball Valve Manufacturer, Exporter AndSupplier In India.

• Brand Name: SYSCHEM
• Pressure: Up to 600
• Size: Up to 2 Inch
• FEATURES: Intergral or Welded Flanges,Two piece self aligning packing gland,Captured Graphite Spiral wound gasket
• Material Grade : A 105/ LF2/ F 304/ F316/ F11/ F22/ F55
• Usage/Application: Chemical, Oil & Gas
• Valve Size: Up to 2 Inch
• Media: Chemical, Oil & Gas
• End Connection: Flanged
• Design Type: Piston Type
• I Deal In: New Only

• Country of Origin: India
• Size: 1inch, 2inch
• Type: Flanged End Valve
• Material: Cast Iron
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Red
• Feature: Blow-Out-Proof
• Structure: Double Half Shaft

general features & highlights : - seat less and glandless valves- field replicable elastomer sleeve- elastomer sleeve having four reinforced lugs- flanged ends & drilled to din, ansi, bs-10, is etc.- this valve incorporates all- the design modifications based- on our exeperence & is of study- construction to handle abrasive corrosive media

We are offering butterfly valve flanged end. Jupiter controls offer offset disc butterfly valves size from 14”(350nb) to 64”(1600nb) with various choice of body, disc & seat materials. Double flanged eccentric disc butterfly valve also known by the name of high performance eccentric disc butterfly valves, have the shaft mounted slightly offset from the pipe centerline, and the shaft is mounted behind the sealing band of the seat. the seat is a narrow resilient band is clamped in the body and must be resilient. Elastomer (rubber) is resilient enough to seal, and the disc only wipes the seat for a few degrees of travel at seating. As the disc is offset from the shaft, there is a lot of metal in the flow stream in the wide-open position, and double-offset valves have somewhat less maximum capacity than flat-disc, non-offset valves. butterfly valve can be used in bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. Wafer bondedrenewable seat butterfly valve no requirement of any gasket to mount between two flanges. Jupiter controls valves are available with wider range of elastomer rubber seat to suit various industrial applications with various operations. Jupiter controls valve design is as per bs 5155 api 609 awwa c 504 and test standard bs en iso 12266-i (bs 6755-i) & api 598 cast iron butterfly valve manufacturer, cast carbon steel butterfly valve manufacturers, cast stainless steel butterfly valve exporter, slim-seal design butterfly valve supplier, rubber lined butterfly valve stockiest, p.t.f.e. Lined butterfly valve manufacturer, wafer type butterfly valve manufacturers, damper type butterfly valve exporter, high performance butterfly valve manufacturer, center disc butterfly valve manufacturers, off-set disc butterfly valve exporter, gear operated butterfly valve supplier, pneumatic operated butterfly valve stockiest, electrical operated butterfly valve manufacturer, zero leakage butterfly valve manufacturers,

• Material: PVC
• Application: Water Fitting
• Finishing: Coated
• Mounting Type: Vertical
• Warranty: 1 Year
• Specialities: Non Breakable, Investment Casting
• Packaging Type: Carton

• Material: CI,CS,SS
• Type: DIAPHRAGM
• Brand Name: K-TECH
• Connection Type: Flanges
• Media Type: Water, OIL, CHEMICALS
• Port Size: 1" TO 12"inch

FLOEC are very lighter and offer a reliable sealing under different ranges of pressure. They are bi-directional are mainly used in isolating or regulating of flow of fluids. They are precisely engineered to offer an excellent performance for long durations. Our valves are high in quality as they are manufactured maintaining the quality at every stage of production and also the finished goods are tested under different parameters. Thus their flawlessness is guaranteed.

• Color: Black
• Size: 1/2\
• Application: Water & Chemical
• Material: HDPE
• Valve Size: 8 inch
• Connector Type: Flanged End

Wholesaler of Ball Valve, HDPE Flange End Ball Valves, Flange End Ball Valve in Ahmedabad, Gujarat.

Why product name is “DOUBLE FLANGED END BUTTERFLY VALVE”, because a butterfly valve casted body have integral flanges (not fabricated/welded on body as photograph) as like standard flange type gate, globe, check or ball valve. Advantage of flange type butterfly valve is easy to mount without using long bolt – stud as wafer type (flangeless) butterfly valve, also can use and easy to mount at dead end of pipe line.   Fabricated body double flange type butterfly valve manufacture by in size above 600NB/600mm/24” with Double Off-Set Disc Design (Eccentric Disc) Butterfly Valve. Flange type, concentric disc, rubber seated, slim seal design butterfly valve gives best performance in low pressure and medium temperature application. These types of valves gives class one performance in application of Water, ETP – Effluent Treatment Plant, Sea Water, Salt Water, DM Plant, Fire Fighting Line, Raw Water Line, Filter Press, Air Silo, Process Chemical Service, Corrosive Chemical, Fire Water Pump Line, and Cooling Water Media. All types of Tight Shut off, Centric Disc,  Rubber Seated Butterfly Valves are cheapest, light weight, easy available, no flange gaskets, easy to install, high performance, ready stock product, major all operation available and easy to manufacture. One more question sometimes arise why we have to use double flanged end type butterfly valve in place of Rising Stem Gate Valve, Bolted Bonnet Globe Valve , Full Bore Ball Valve or Plug Valves. The answer is main low cost, second light in weight, third low torque which saves cost of actuators and fourth tight shutoff - zero leakage in soft rubber seated valve. If pressure and temperature limit cover in range of butterfly valves then it is best selection forever.   Why Butterfly Valves are low cost, have cheap rate compare other types of metal valves? The reason is butterfly valve body materials not come in direct contact with flow media, so no need to use any high quality steel materials, cast iron or ductile iron also good for any service. Only the disc material we have required to use high grade of steel to best suitable process media application. Mostly in all valve main body parts always heavy and that cost also much high, here due to saving of body material cost total butterfly valve cost goes down. Selection of elastomer rubber seat is base on process media application and its temperature. Nitrile, Neoprene, EPDM, NBR, Buna-N, Hypalon, Ebonite, Silicon, Viton are seat options as a rubber elastomer for Double Flanged End Butterfly Valves. Sometimes we think how to assemble a butterfly valve, it may be very difficult but it is wrong thinking. Design construction and assembly of Butterfly Valve is very simple. By the help only major four parts total assembly complete of butterfly valve. Main parts of Double Flanged End Butterfly Valve are Body, Seat, Disc and Spindle/Stem. First duly machined body renewable seat or bonded seat fixed on body, second insert a disc on centre of valve body, third enter a spindle from top side centre of body (if spindle is in two part then one from top and another from bottom) now last fourth bolting or pinning joint of disc and spindle to rotate disc along with stem. At present bare stem double flanged end butterfly valve is ready; we can mount flow control hand lever, gear or any actuator to suit our process application. Nivz Valve & Automation also manufacture and exporter of slim seal body double flange type butterfly valves in various body material like CF8/CF3/CF8M/CF3M/CN7M/SS304L, SS 316L, SS317L, NAB2, Alloy20, Nickel Aluminium Bronze, Hastelloy C22/276, Monel, Duplex Steel & Super Duplex Steel for Sea Water, Salt Water, Sulphuric Acid & Corrosive Chemical application. We have broad experience of valve in a corrosive application. Nivz supplying butterfly valves with Stainless Steel Hand Lever, Stainless Steel Gear Actuator and Stainless Pneumatic Actuator body for very corrosive application on customer order basis. Nivz Valves - Double Flanged End Butterfly Valve Manufacturer - Exporter, Supplier, Stockist, Importer. Butterfly Valve Various Operation Options: A Nivz standard double flange end butterfly valve supply with eight bare stem or flow control lever operated. Size range up to DN 200 (8”) supply with flow control lever, above with quarter turn worm gear actuator operation.   Some more options in valve automations as list below: Quarter Turn Worm Gear Actuator Operated Double Flanged End Butterfly Valve Remote Operated Double Flanged End Butterfly Valve Motorized Actuated Double Flanged End Butterfly Valve Electrical Actuator Operated Double Flanged End Butterfly Valve(Single Phase / Three Phase / 220 V / 440 V./Flameproof/Weaterproof/Explosionproof) Pneumatic Actuator Operated Double Flanged End Butterfly Valve Spring Return Quarter Turn Actuated Double Flanged End Butterfly Valve High Performance Butterfly Control Valve with Double Flanged End Proportional Modulating Type Butterfly Control Valve with Double Flanged End Our technical team have more than 18 years of experience industrial process valve automation & system. We are one of the leading Butterfly Valve Manufacturers, Exporters, Supplier and Stockiest. A complete necessary accessories also available for automatic flange type butterfly valves like Manual Override Gear Box, Solenoid Valve (5 x 2 Way / 4 Way x 5 Port OR 3 X 2 Way), Air Filter Regulator, Silencer,  Elector Pneumatic Valve Petitioners, Air Receive Tank, Air Compressor, Relay, Pneumatic Tubing & Connector Fittings etc. Butterfly Valve Tightness Check EN 12266 (Leakage Rate A) ISO 5208, Category 3 API 598 Table 5 ANSI B 16-104, Class VI Salient Features of Double Flange Center Disc Butterfly Valve Concentric Disc Slim Seal Body Greater Sealing Capacity Elastomer Soft Rubber Seat Low Torque Permanently tight closure Bi-Directional Valve (Inlet can be from anyside) Suitable for On-off as well as Throttling Service Suitable for almost all media Short Compact Face To Face Dimension Flanges Integral in Casted Body Long Service Life Smooth, Easy Operation Maintenance Free Version Less Weight, Easy To Install Leakage Class VI (Zero Leakage)     Application of Double Flange End Butterfly Valve Water Treatment Plant DM Plant Effluent Treatment Plant Sea Water Applcation Paper Industry Sugar Industry Breweries Chemical Industry Waste Effluent Treatment Plant Rayon Plant Drilling Rigs Textile Industries Gas Plant Cooling Water Circulation Heating & Air Conditioning Pneumatic Conveyors Compressed Air Cement Plant Air Silo

• Grade: As per manufacturer
• Construction: 3 piece design, 1 piece stem (spindle), full bore, Teflon seated
• Connection End: Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

We are the main supplier of this product.

flanged butterfly valve Valve comply with BS 5155, API 609, MSS SP 67 and ISO 5752 valves designed to fit without gaskets between flanges drilled to ANSI 125, DIN. ND 10,16, BS 10 tables D E and F of BS4505 PN 1016 tables 6,7 and 8 of IS: 6418 and tables 11,15 of IS:6392.

For many industrial applications use of Polypropylene Flanged Valve is done for delivering high work output. These types of valves are high in demand because of its outstanding features which includes resistance against pressure as well as high durability. These valves are made available in different sizes starting from 2", 2½", 3" , 4" to match up multipurpose needs of different industries. One of the trusted manufacturers of this valve in the industry is Raj Group. The body of the valve is made out of Poly propylene. The product is easy to handle and comes with a High Pressure Bearing capacity ranging Up to 10 Kg/cm². The product is made available at an affordable price. The Polypropylene Flanged Valve is manufactured based on the prevailing industrial standards. In case there is any customized need from the client end then in most of the cases the leading companies like Raj Group accept such orders. Size Available 2", 2½", 3" , 4"

flanged butterfly valves, Gear Operated Butterfly Valve