Flap Valves Dealers in Odhav, Ahmedabad

• Size: 1” NB to 12” NB (ANSI B 16.5, 125# FF)
• Design Standard: BS – EN - 12334 / ANSI B 16.34
• Hydro Testing: Body : 10 Kg/Cm² & Seat: 06 Kg/Cm²
• Rubber Lining Thk: Min. 3mm up to 6” NB & above 6” NB Min. 4mm

Salient Features :- Flap Type Rubber Lined Check Valves are devised to prevent the reverse flow in a piping system, controlled by the rotation of its internal flap. These are Flanged, Split body design and suitable for vertical installation. Advantages :- Zero leakage at 0.3 Kg/Cm² back pressure. Negligible head loss in straight flow pattern. Flap Check Valves are soft seated valves. The controlling element is Moulded steel reinforced flap without a hinge (No jamming of Hinge pin Since there is none).  Options :-Ebonite (HRL), EPDM, Hypalone, Viton, Bromo Butyle, Iso Butyle Rubber Lining available.

Product Details: We are the best manufacturer and supplier of superior quality Nipple Spring & Flap Foot Valve to our precious customers. Our offered array of products is accurately manufactured utilizing the finest quality basic material & contemporary technology in whole compliance with the set industry norms. Offered array of product is well known among the clients for their longer service life & other salient features. Features: Easy installation Unmatched quality Low maintenance

Foot valve is meant to stop water draining out of suction lines in pump applications. Whether you draw water from a lake, canal, pond or tank the foot valves act as a dual purpose by filtering of the water and also holding in the priming pump head. Though foot valves are for general application there are specially designed foot valves for specific applications like common wells, ponds, deep bore wells etc

• Material: PP
• Color: Red
• Size: 15mm to 100mm
• Brand: Sheetal
• Connection Type: Thread
• Packaging Type: Box
• I deal in: New Only
• Color available: Red, Orange, White
• Temperature: -5 to 30 Degree C

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.   Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.   Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.   This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage a Rotary Feeder   Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.   Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications. Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure. Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve. This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage aRotary Feeder Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system. Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.  

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.   Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.   Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.   This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage aRotary Feeder   Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.   Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.  

These flap type of foot valves are used to fit with flanged end products and are available with rubberleather flap as per the client requirements. C. I. 4 & 6 bolts foot valve heavy duty flanged sizes range: 2” to 12”

Flap valves It is available with standard as well as customized configuration. The size ranges from 50 NB to 900 NB. Range also includes pressure rating,

double flap valve, Dual Tunnel Diverter Valve, rotary sifter

PP FLAP TYPE FOOT VALVE, Pipe Elbows, PVC Air Valve, pvc float valve