Floor Hardener Dealers in Ahmedabad

Pioneers in the industry, Ironite® is involved in offering an effective range of Ironite Floor Hardener, which is usually applied over clean concrete surface. These epoxy based 3 component metallic & non-metallic base screed composition. Our range is available in both natural & colored formulations in different packaging as per the client’s requirements. The use of such hardeners makes the flooring durable and decrease recurring expenses in repairs.

Product Description: "MYMIX - NMF (Floor Hardener)" is a ready to use non-metallic floor hardener based on very high quality natural hard non metallic aggregates. These aggregates play an important role in attributing properties of abrasion and wear resistance.It renders tough, wear resistant, dust free, anti—skid, long lasting and maintenance free floors. It bonds monolithically to the base concrete and is suitable for existing as well as new floors. Suitable Substrates: Concrete floors, residential & commercial area All types of cementitious screeds Advantages: Hardwearing and dust proof floor toppings. Anti-skid and anti-slip in case of oil spillages. Good water proofing properties, hence suitable for rooms and exteriors that are constantly wet. Non-rusting and therefore trouble free Resistant to petrol, diesel and vegetable oils. Abrasion resistant is twice as good as normal concrete. Increases strength and impact resistant. Substantial increase in service life and therefore works out economical Has extremely low shrinkage. Extremely high abrasion resistance. How to Apply: NMF Floor Hardener dry mix is usually applied in two stages. The concrete / compensating under screed base should be free from excess water and sufficiently hardened to allow light foot traffic Two‐ third (about 65 ‐ 70% )of the dry mix should be sprinkled evenly by hand or scoop horizontally And once the material becomes evenly dark, it is floated by wooden float The surface should not be over worked Immediately thereafter, the remaining one – third (30 ‐35%) of the dry mix should be evenly sprinkled in the similar manner vertically, and should be spread evenly Final finish can be done by troweling to give the desired finish with power‐float The weight of power – float should not be less than 60 kg. Particular attention should be paid to edges and corners to ensure full compaction Final troweled floor surface should be cured with conventional curing methods   Packing: 25 kg. Project packing of 40 kg size is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

• Packaging Type: Sack
• State: Powder
• Shelf Life: 12 months
• Packing Size: 50 Kg
• Flexural Strength: 14.7 Mpa
• Compressive Strength: 109.3 Mpa
• Purity: 99%

We are the manufacturers and supplier of this products.

Metallic Floor Hardener, Cast Iron Powder, Emery Grain

Non-Metallic Floor Hardener, Shali Seal PU II

Floor Hardeners, repairing products, Epoxy Adhesives

Concrete Floor Hardener, Construction Chemicals