Flosteer Engineers Pvt. Ltd Vatva, Ahmedabad, Gujarat

Flosteer Wafer Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards. They are specially developed for applications where a low-pressure loss is essential. Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc. The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.

Flosteer Swing check valves are ideally suitable for vertical and horizontal application. A range of Check Valves (Non-Return Valves) suitable for oil, gas, water, refining, power and chemical applications where the prevention of flow reversal is mandatory. Flosteer Check Valves are Bolted cover design up to 600# and above pressure seal design. Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. FLOSTEER Swing Check valves are available under any Third party inspection including IBR (Indian Boiler Regulation). Swing Check valves can be supplied with Titling disc design, Counter weight or Dash pot arrangement.

Flosteer bolted cover “Y” Type strainer has low pressure drop due to higher flow area through screen. Flosteer “Y” Strainer mechanically removing solids from flowing liquids, Air, Steam or gases by means of a perforated or wire mesh straining element. The strainer improves the clearance in the medium, and prolongs the life of valves; protect expensive pumps, meters and other equipments. Flosteer “Y” strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the "down side" of the strainer body so the entrapped material can properly collect in it. Flosteer “Y” strainer also available with drain Plug which can be replaced with Ball valve for frequent blow off.

Flosteer Slim-Seal, Center design High Performance Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally mouldedreplaceable elastomers body liner. These butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.

Flosteer offers a wide range of sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick, reliable and economical way to verify the flow of fluids through industrial process lines. Full view type sight flow indicators are suitable for corrosive chemicals, acids and colored liquids. Flosteer Sight Flow Indicators are Bi-Directional and may be placed in any orientation. They can be installed vertically or horizontally in the middle of any kind of non-transparent pipeline and are very convenient to observe the flow from any direction.

Flosteer ‘A’ weir Diaphragm Valve having rugged design to incorporating the best material available is proved by easy, smooth and maintenance free operation for a long time. Extra heavy-duty casting affords high resistance to atmospheric corrosion. Flosteer diaphragm valve reduces diaphragm travel for extended service and fine control.

Flosteer Basket [POT] strainers remove damage causing particulate matter from the process media, protecting system components such as flow meters, pumps, mechanical seals and spray nozzles. The particulate matter is captured in the strainer basket. The line is then temporarily shut down and the basket removed for cleaning or replacement.

All types of valves with P.T.F.E. (PFAFEP) Teflon® Lined valves and it can be equipped with a Manual Handle or with Pneumatic or Electric Actuators operated. Full ranges of accessory items are available including Limit Switch, Solenoid Valves, IP Converter, Positioner and manual override devices.

Knife edge gate valve, Flosteer High Performance Uni-Directional Bi-Directional Knife Edge Gate Valve provide better value and performance with many standard features not found in other, commodity Knife Edge Gate Valve. Flosteer Knife Edge Gate Valves are available in different combination of Body, Seat & Gate material. Machine ground ultra thick gate and lapped integral renewable seat are designed to handle dense mixture of stock, and slurries.

Flosteer gate valves are rising spindle, outside screw & yoke type construction. Flosteer gate valves are provided with smooth machined full bore and full opening of wedge eliminates additional pressure drop across the valve. Solid wedge, flexible wedge, split wedge, and parallel wedge designs offer maximum flexibility and option to clients for their suitable selection. Specially designed seat and gland packing materials are provided for superheated steam and high temperature thermic fluid to trouble free service, easy operation and longer life. Deep stuffing box is providing to assure tightness and maximum packing life. A separate properly machined and lapped back seat facilities are provided for replacement of gland packing when valve is in stream under pressure. Stellited trims are provided for all above 600# as a manufacturing standard of “flosteer” valves and in lower rating also on request. Flosteer also offer extra long, extended bonnet gate valve for low temperature and cryogenic services. Antifriction thrust bearing is provided in yoke sleeve for higher sizes and classes.

Size Range : 1" To 24"

Flosteer Disc Check Valves feature a wafer type, compact and rugged cast steel design and are suitable for any process liquid, air, gas, steam etc. Disc check valves are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow. Advantage of these check valve is they can be mount between pipe flanges in any direction. Body Seat available in Metal-to-Metal and Soft seat also.

Flosteer Boiler Blow Down Valves are Bolted Bonnet Design & Parallel Slide Type. Flosteer Boiler Blow Down Valves are available with Rack & Pinion arrangement for easy and quick operation. Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. Deep stuffing box is providing to assure tightness and maximum packing life. FLOSTEER Boiler Blow Down Valves available under any Third party inspection including IBR (Indian Boiler Regulation) in size range from 25mm to 100mm up 900# pressure rating.

Flosteer Boiler Blow Down Valves are Bolted Bonnet Design & Parallel Slide Type. Flosteer Boiler Blow Down Valves are available with Rack & Pinion arrangement for easy and quick operation. Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. Deep stuffing box is providing to assure tightness and maximum packing life.

Our high performance ball valves advanced features such as anti - static devices ensure electrical continuity between ball, stem & body, leak proof multi seal system, blow out proof stem operate the valve safely even at high differential pressure, and lower operating torques due to high spherocity & surface finish of ball.

Boiler Blow Down Valves are Bolted Bonnet Design & Parallel Slide Type. Flosteer Boiler Blow Down Valves are available with Rack & Pinion arrangement for easy and quick operation.

Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally mouldedreplaceable elastomers body liner.

We are offering check valves like swing check valves,dual plate check valve,wafer type check valve and more.

Flosteer ‘A’ weir Diaphragm Valve having rugged design to incorporating the best material available is proved by easy, smooth and maintenance free operation for a long time. Extra heavy-duty casting affords high resistance to atmospheric corrosion.

Flosteer Valves have been proven in service application for over 35 years. Flosteer Flush bottom valves (Tank valves) are designed to provide drainage and dead space free shutoff for reactors, vessels and storage tanks.

Flosteer Valves have been proven in service application for over 35 years. Flosteer offers a wide range of Forged Steel Globe, Forged Steel Gate and Forged Steel Check Valves.

we offer knife edge gate valves. flosteer engineers pvt. ltd is offering knife edge gate valve. our knife edge gate valves are available in different combination of body, seat & gate material.

Flosteer make globe valves are meticulously designed to ensure 100% smooth flow area to reduce pressure drop across the valve.

We are offering pneumatic control valves, specially designed for use in air, steam, water, gas, vapor, process and other application.