Flow Meter Dealers in Narol, Ahmedabad

mass flow meter is working on the based of carioles’ force principle basically used for all the liquid gas, steam, solid – liquid mixture.  measuring range : 0-150 t/ h  ,  accuracy : k0.20 %. overview:- we can provide wide flow measurement products. For almost all industries, we can offer complete measurement programs and perfect services. process control trade measurement gas , liquid ,steam, high-temperature fluid, high-pressure fluid, micro-flow high flow, clean medium , the medium containing impurities low-viscosity , high viscosity corrosive medium we provide the flow meters as below. mass flow meter, electromagnetic flow meter  vortex flow meter , metal tube rotameter and ultrasonic flow meter.

• Brand Name: Charun
• Place of Origin: Ahmedabad
• Maintenance: The meter is virtually maintenance-free. However, it is important the gears moves freely. Keep the meter clean and free of contaminants
• Highest Pressure: up to 50 bars
• Functions: RESET to reset the subtotal to zero,Cumulative Total,Units Switch
• Product Type: Digital Oil Flow Meter

We are a trusted Manufacturer, Exporter and Supplier of Digital Oil Flow Meter. Digital Oil Flow Meter, offered by us, provides measurement with a precision of ±0.5%. Our Digital Oil Flow Meter can measure highest pressure up to 50 bars. These Digital Oil Flow Meters are precisely engineered, and are available with us at competitive prices. Functions Reset to  : press RESET to reset the subtotal to zero. Cumulative Total : The Cumulative Total is automatically showed below the subtotal. When the cumulative total reaches a maximum reading it will automatically reset to zero. Units Switch : press MOVE and hold for 3 seconds, press RESET for for units shift among Liters(L) / Gallons(GAL) / Pints(PT) / Quarts(QT). Press MOVE again for locking the unit. Maintenance The meter is virtually maintenance-free. However, it is important the gears moves freely. Keep the meter clean and free of contaminants. Note : For the most accurate reason, before using, make sure there is no air in the system and meet the meters minimum flowrate requirements

• Material: Stainless Steel
• Pressure: 10 BAR
• Voltage: 24 VDC
• Weight: 1 KG
• Display: Digital
• Brand Name: Ishan Automation
• Temperature: 400 Degree
• Media: Solid, Powder & Dust
• Connection Type: 1.5inch Standard & 1inch BSP Thread
• Usage/Application: To Measure The Flow Rate Of Very Fine Particles

• NOMINAL PIPE SIZE (NB): 25 nb, 40 nb

Steel frame: ASTM A234 grade WPB, in compliance with ANSI B16.28. Steel sight glass piece : according to SCH 40. Flange: ASTM A105, in compliance with ANSI B16.5Class 150lbs; JIS 10K or DIN is also available on request. Standard: Two fixed anges; one loose and one fixed anges or two loose anges are on request. Lining: Pure FEP I PFA in compliance with ASTM D4894. Glass : Toughened with PTFE gasket Other nominal sizes are available on request.

We source the required raw material from the certified places after complete quality confirmation. As a result of which, the finished products comply with elevated industry standards. Buyers are free to place orders and can expect timely deliveries of the same.   STANDARDS : All Indian Standards, ASTM, DIN, BS Standards and many other equivalent Standards.       APPLICATION : M.F.I Tester is used to measure the flow rate of different Polymers. The generated values helps to distinguish the different grades of Polymers. Because of the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flow ability.     USP : HEXA PLAST provides Melt Flow Indexer with customized controller keeping in mind the process of test. Precise Temperature with accuracy of + 0.1º C. Microprocessor based digital timer with facility to select number of test, cutter time, buzzer indication on completion of test and advance buzzer indication for manual cutting procedure. Fully Automatic MFI is having facility to conduct to test independently by pre-setting the temp. of test, time & applying the required Load and it will directly give the result of MFI for individual test & average of all test. Determination of melt flow index of thermo plastic materials   Definition : Melt flow index is defined as the rate of extrusion of molten resin under specified temperature and pressure through a specified size of die in 10 minutes. It is expressed in g/10 min. MFI Tester capable of maintaining tem. From ambient to 350°C   Principle & Significance: This characteristic is primarily useful for measuring uniformity of flow rate of materials. This is used for grading of Thermoplastic material and their quality control i.e. in determining lot-to-lot consistency of resin. A material having high molecular weight has more resistance flow than the flow molecular weight polymer.

• Material: Ductile Iron,Cast Steel
• Brand: Hi Tech Applicator
• Operating Temperature: -20 C-180 Deg C
• Hydraulic Test Pressure: 15 Kg/Cm2
• Operating Pressure: 3 bar
• Lining Thickness: 3 to 5 mm

• Gasket: P.T.F.E. / CAF

Flosteer offers a wide range of sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick, reliable and economical way to verify the flow of fluids through industrial process lines. Full view type sight flow indicators are suitable for corrosive chemicals, acids and colored liquids. Flosteer Sight Flow Indicators are Bi-Directional and may be placed in any orientation. They can be installed vertically or horizontally in the middle of any kind of non-transparent pipeline and are very convenient to observe the flow from any direction.

• Display: Digital/Analog
• Packaging Type: Box
• Brand Name: Kromschroder
• Power Supply: Dc

• Pressure: 20 kg
• Material: WCB / CF8 / CF8M / CF3M
• Size: 25 mm to 150 mm
• Country of Origin: Made in India
• Features: Dimensional accuracy ,Corrosion-resistance ,Durability .
• Brand Name: Durga
• Usage/Application: Industrial
• Tolerance: Up to 150 mm +/- 1mm; 200mm and above +/-2mm
• Hydro Test Pressure: 15 Kg/cm2
• Material Grade: CF8 / CF8M / CF3M / WCB

• Material: Carbon Steel
• Application Media: Any Liquid
• Application: MILK

• Brand Name: Prism (PMALL)
• Application Media: Water
• Flow range(Max-Min): all
• Operating Temperature (Celsius): 0 to 50C
• Line Size: 20 , 25 , 50 , 75 , 100 , 125 , 150 mm

We are the leading supplier of this products.

"Surya" Melt Flow Index Tester is designed for measuring "Melt Flow Rate' with high accuracy and being used for quality control test on flow ability, grading of thermoplastic materials according to flow. It is designed to calculate accurate rate of extrusion of molten resin through an orifice of specified temperature and pressure. Standard equipment includes all operating tools, piston and dies, Integrated microprocessor based PID temperature controller for a temperature range of 0-350 Deg.C with time facilities,Resolution as 999.9 sec

These BPC flow meters are constructed using latest technical improvements being made so as to ensure precise measurement of the flow. Plastic BPC comes with rotary pin valve control so as to permit adjustment of flow rate to desired level which is between 0 – 15 ltrsmin.

• MODEL: (K-MFI-01)
• Temperature Range: Ambient to 300°C
• Timer Range: Range from 0.1 minute/sec to 999.9 minute/sec.

Kant Plastology feels abundantly pleased to offer a very sleek and compact design of MELT FLOW INDEX TESTER is rugged constructed machine with very precisely machined mechanical parts and accurate control on heating through PID temperature control. Custom made heaters equally distributed in barrel assembly for uniform heating. Kant Plastology procures all related mechanical accessories to conduct the test. Specification

Reference standards- ASTM-1238, ISO-1133, IS-2530 Method- A- A System status- Digital Temperature controller- Micro processor based double display PID controller Temperature range- Ambient to 300°C Temperature resolution- 0.1°C Accuracy- ± 0.1°C Timer range- 0 - 999 second

double window sight glass indicator, ball check valves, Wafer Check Valves

PP Flange Ball Valve

Flow Measurement Orifice Meter, Air Conditioning Refrigeration Equipments

Flow Indicators valve, Plastic Nut Bolt, PP Coupler, FRP Angle And Piece

Abrasive Wheel, Welding Electrodes, Gas Regulator Single Stage Double Gauge

Muffle Furnaces, Opacity Testers, Water Baths

Flow Meter, Pressure Transmitters, Digital Pressure Gauges

Welding Equipment, Environment Audit, instrumentation

divinyl benzene, membrane

turnkey service, two stage watering vacuum pump, Liquid Ring Vacuum Pump

Flow Indicators, Pipe, Pipe Fitting

Universal tensile tester, Notch Cutter, VSP-HDT Tester, Cof Tester

PP Lined Flow Indicators, pfa lined ball valves, Plastic Tent