Flow Meter Dealers in Vatva, Ahmedabad

• NOMINAL PIPE SIZE (NB): 25 nb, 40 nb

Steel frame: ASTM A234 grade WPB, in compliance with ANSI B16.28. Steel sight glass piece : according to SCH 40. Flange: ASTM A105, in compliance with ANSI B16.5Class 150lbs; JIS 10K or DIN is also available on request. Standard: Two fixed anges; one loose and one fixed anges or two loose anges are on request. Lining: Pure FEP I PFA in compliance with ASTM D4894. Glass : Toughened with PTFE gasket Other nominal sizes are available on request.

• Power: 230VAC, Single Phase with Neutral.
• MOC: Powder Coated MS.

The Melt Flow Index (MFI) is a amount of the effortless flow of the melt of a given thermoplastic polymer. It is defined as the weight of polymer in grams flowing in 10 min through a die of specific diameter and length by a pressure applied through a known weight at a controlled temperature.  

We source the required raw material from the certified places after complete quality confirmation. As a result of which, the finished products comply with elevated industry standards. Buyers are free to place orders and can expect timely deliveries of the same.   STANDARDS : All Indian Standards, ASTM, DIN, BS Standards and many other equivalent Standards.       APPLICATION : M.F.I Tester is used to measure the flow rate of different Polymers. The generated values helps to distinguish the different grades of Polymers. Because of the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flow ability.     USP : HEXA PLAST provides Melt Flow Indexer with customized controller keeping in mind the process of test. Precise Temperature with accuracy of + 0.1º C. Microprocessor based digital timer with facility to select number of test, cutter time, buzzer indication on completion of test and advance buzzer indication for manual cutting procedure. Fully Automatic MFI is having facility to conduct to test independently by pre-setting the temp. of test, time & applying the required Load and it will directly give the result of MFI for individual test & average of all test. Determination of melt flow index of thermo plastic materials   Definition : Melt flow index is defined as the rate of extrusion of molten resin under specified temperature and pressure through a specified size of die in 10 minutes. It is expressed in g/10 min. MFI Tester capable of maintaining tem. From ambient to 350°C   Principle & Significance: This characteristic is primarily useful for measuring uniformity of flow rate of materials. This is used for grading of Thermoplastic material and their quality control i.e. in determining lot-to-lot consistency of resin. A material having high molecular weight has more resistance flow than the flow molecular weight polymer.

• Display: Digital/Analog
• Packaging Type: Box
• Brand Name: Kromschroder
• Power Supply: Dc

• MODEL: (K-MFI-01)
• Temperature Range: Ambient to 300°C
• Timer Range: Range from 0.1 minute/sec to 999.9 minute/sec.

Kant Plastology feels abundantly pleased to offer a very sleek and compact design of MELT FLOW INDEX TESTER is rugged constructed machine with very precisely machined mechanical parts and accurate control on heating through PID temperature control. Custom made heaters equally distributed in barrel assembly for uniform heating. Kant Plastology procures all related mechanical accessories to conduct the test. Specification

These BPC flow meters are constructed using latest technical improvements being made so as to ensure precise measurement of the flow. Plastic BPC comes with rotary pin valve control so as to permit adjustment of flow rate to desired level which is between 0 – 15 ltrsmin.

• Pressure: 20 kg
• Material: WCB / CF8 / CF8M / CF3M
• Size: 25 mm to 150 mm
• Country of Origin: Made in India
• Features: Dimensional accuracy ,Corrosion-resistance ,Durability .
• Brand Name: Durga
• Usage/Application: Industrial
• Tolerance: Up to 150 mm +/- 1mm; 200mm and above +/-2mm
• Hydro Test Pressure: 15 Kg/cm2
• Material Grade: CF8 / CF8M / CF3M / WCB

• Material: Ductile Iron,Cast Steel
• Brand: Hi Tech Applicator
• Operating Temperature: -20 C-180 Deg C
• Hydraulic Test Pressure: 15 Kg/Cm2
• Operating Pressure: 3 bar
• Lining Thickness: 3 to 5 mm

• Gasket: P.T.F.E. / CAF

Flosteer offers a wide range of sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick, reliable and economical way to verify the flow of fluids through industrial process lines. Full view type sight flow indicators are suitable for corrosive chemicals, acids and colored liquids. Flosteer Sight Flow Indicators are Bi-Directional and may be placed in any orientation. They can be installed vertically or horizontally in the middle of any kind of non-transparent pipeline and are very convenient to observe the flow from any direction.

"Surya" Melt Flow Index Tester is designed for measuring "Melt Flow Rate' with high accuracy and being used for quality control test on flow ability, grading of thermoplastic materials according to flow. It is designed to calculate accurate rate of extrusion of molten resin through an orifice of specified temperature and pressure. Standard equipment includes all operating tools, piston and dies, Integrated microprocessor based PID temperature controller for a temperature range of 0-350 Deg.C with time facilities,Resolution as 999.9 sec

Reference standards- ASTM-1238, ISO-1133, IS-2530 Method- A- A System status- Digital Temperature controller- Micro processor based double display PID controller Temperature range- Ambient to 300°C Temperature resolution- 0.1°C Accuracy- ± 0.1°C Timer range- 0 - 999 second

• Type: Digital Fuel Flow Meters i
• Brand Name: Charun
• Accuracy: High as ± 0.3%
• Country of Origin: Ahmedabad
• Units: Liters (L) /Gallons (GAL)/ Pints (PT)/ Quarts (QT)
• Flow Meter Time: 9000 hours of operation approximately

We are offering a quality range of Digital Fuel Flow Meters in the market. Our Digital Fuel Flow Meter comes with 4 unit options Liters (L) /Gallons (GAL)/ Pints (PT)/ Quarts (QT). The battery inside this Digital Fuel Flow Meter offer 9000 hours of operation approximately. By fine adjusting, the accuracy of this Digital Fuel Flow Meter can be as high as ± 0.3%.

• Size: Multisizes
• Material: Aluminum, Cast Iron, Stainless Steel
• Color: Brown, Grey, Red
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Application: Industrial
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Warrenty: 1 Year, 2 Years

Diesel Fuel Flow Measurement from our side is a remarkable and ace product. The low-pressure drop through the meter makes the meter ideally suited for use in gravity applications. This product from our side is a masterpiece and has proven to be a highly reliable and highly accurate method of measuring flow, providing exceptional repeatability and high accuracy. On-time delivery is something that we always follow. Available in Digital Diesel Flow Meter and Mechanical Diesel Flow Meter. We offer superior quality Diesel Fuel Meter for our customers. These meters are most suitable for diesel, kerosene, petrol MTO. Based on latest technologies, these are in conformance with various national quality standards. It has incorporated the oval rotor principal into its design. This has proven to be a highly reliable and highly accurate method of measuring flow, providing exceptional repeatability and high accuracy. Also Known as Print Flow Meter With Ticket Printer, High Accuracy Diesel Flow Meter, Flange Type Diesel Flow Meter, Biodiesel Flow Meter Application: Diesel Flowmeter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. it is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

• Material: SS
• Usage: Automotive
• Output: 4-20 MA / RS485

• Material: Stainless Steel
• Pressure: 10 BAR
• Voltage: 24 VDC
• Weight: 1 KG
• Display: Digital
• Brand Name: Ishan Automation
• Temperature: 400 Degree
• Media: Solid, Powder & Dust
• Connection Type: 1.5inch Standard & 1inch BSP Thread
• Usage/Application: To Measure The Flow Rate Of Very Fine Particles

Flow Measurement Orifice Meter, Air Conditioning Refrigeration Equipments

In Double Window type Sight Flow Indicator (Sight Glass) Contains Two Toughened Glasses Mounted opposite to each other. Dharmi Double Window Type Sight Glass (Sight Flow Indicator) available with various thickness and diameter of glass to suit various applications respects to fluid pressure and temperature. Double Window Type Sight Glass (Sight Flow Indicator) is very easy to replace glass without dismantling the whole Sight Glass assembly from process line. Double window type Sight Glass gives better performance in application of Higher Pressure & Temperature.