Flow Tester Dealers in Ahmedabad

With our modern transportation facility, timely and safe deliveries are guaranteed with us. With the assistance of our safe and automatic warehousing system, we are able to store the entire lot of products in a secured manner. The entire lot is cross checked at regular basis for ensuring complete safety of the products.

• Feature: Comprehensive statistical capability,Simple push-button RT D calibration

The most precise instrument for the measurement of Melt Flow Rate (MFR) or melt volume rate (MVR) in quality control and research applications. The LMFI 5000 is the first melt flow indexer to utilize a powerful 32-bit microprocessor to provide test parameter control, self-diagnostics and digital calibration. The onboard computer controls and displays temperature to ±0.1°C using a unique PID control algorithm. Four melt indexer models are offered in the advanced Dynisco LMI 4000 series, each with features designed to meet specific application requirements.

We source the required raw material from the certified places after complete quality confirmation. As a result of which, the finished products comply with elevated industry standards. Buyers are free to place orders and can expect timely deliveries of the same.   STANDARDS : All Indian Standards, ASTM, DIN, BS Standards and many other equivalent Standards.       APPLICATION : M.F.I Tester is used to measure the flow rate of different Polymers. The generated values helps to distinguish the different grades of Polymers. Because of the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flow ability.     USP : HEXA PLAST provides Melt Flow Indexer with customized controller keeping in mind the process of test. Precise Temperature with accuracy of + 0.1º C. Microprocessor based digital timer with facility to select number of test, cutter time, buzzer indication on completion of test and advance buzzer indication for manual cutting procedure. Fully Automatic MFI is having facility to conduct to test independently by pre-setting the temp. of test, time & applying the required Load and it will directly give the result of MFI for individual test & average of all test. Determination of melt flow index of thermo plastic materials   Definition : Melt flow index is defined as the rate of extrusion of molten resin under specified temperature and pressure through a specified size of die in 10 minutes. It is expressed in g/10 min. MFI Tester capable of maintaining tem. From ambient to 350°C   Principle & Significance: This characteristic is primarily useful for measuring uniformity of flow rate of materials. This is used for grading of Thermoplastic material and their quality control i.e. in determining lot-to-lot consistency of resin. A material having high molecular weight has more resistance flow than the flow molecular weight polymer.

• Power: 230VAC, Single Phase with Neutral.
• MOC: Powder Coated MS.

The Melt Flow Index (MFI) is a amount of the effortless flow of the melt of a given thermoplastic polymer. It is defined as the weight of polymer in grams flowing in 10 min through a die of specific diameter and length by a pressure applied through a known weight at a controlled temperature.  

• Melt flow index Tester: 50000

Manufacturers & Exporters of Melt Flow Index Tester   Melt Flow Index Tests measures the rate of extrusion of a thermoplastic material through an orifice of specific length and diameter under prescribed condition of temperature and pressure. This test is used as a means of measuring the uniformity of flow rate of the material. With the help of this test we can distinguish between the different grades of polymer. Specification : Temperature Controller : Microprocessor based Digital temperature Controller with range up to 400°C, resolution up to 0.1°C & accuracy of ±0.1% F.S.D. Timer : Microprocessor based Digital Timer with range up to 999.9 seconds and having preset facility and buzzer output. Weights : 2.16 Kg & 5 Kg hard chrome plated weights. Accessories : Orifice, Piston, Material charger, Barrel cleaner, Orifice cleaner, Sample Cutter. Paint : Powder Coated. Power : 230V AC.

Melt Flow Index Testing Machines: Semi Automatic Melt Flow Indexer & Fully Auto Melt Flow Indexer - Available in Different Models. Please Contact Us for Details..  

• MODEL: (K-MFI-01)
• Temperature Range: Ambient to 300°C
• Timer Range: Range from 0.1 minute/sec to 999.9 minute/sec.

Kant Plastology feels abundantly pleased to offer a very sleek and compact design of MELT FLOW INDEX TESTER is rugged constructed machine with very precisely machined mechanical parts and accurate control on heating through PID temperature control. Custom made heaters equally distributed in barrel assembly for uniform heating. Kant Plastology procures all related mechanical accessories to conduct the test. Specification

"Surya" Melt Flow Index Tester is designed for measuring "Melt Flow Rate' with high accuracy and being used for quality control test on flow ability, grading of thermoplastic materials according to flow. It is designed to calculate accurate rate of extrusion of molten resin through an orifice of specified temperature and pressure. Standard equipment includes all operating tools, piston and dies, Integrated microprocessor based PID temperature controller for a temperature range of 0-350 Deg.C with time facilities,Resolution as 999.9 sec

• Temperature Range: 0-400 °C

The Melt Flow Index Test measures the rate of extrusion of a Thermoplastic material through orifice of Specific Length and Diameter under prescribed conditions of temperature and pressure.Fully Automatic MFI is having facility to conduct to test independently by pre-setting the temp. of test, time & applying the required Load and it will directly give the result of MFI for individual test & average of all test.Melt Flow Indexer is used to measure the flow rate of different polymers. The reported Melt Index values helps to distinguish between the different Grades of Polymers. This is due to the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flowability.

• Material: POLYMER
• Frequency: 50 Hz
• Country of Origin: Made in India
• Voltage: 230 V
• Temperature Range: Ambient To 400 Degree
• Usage/Application: To Check M.F.I Rate Of Raw Material And Final Product & Research & Development Purpose
• Brand: Techplast
• Phase: Single Phase
• Weight: 5 kg 

On the GT a special balance, which can measure stable weight while the sample is falling onto it, is integrated into the unit to determine the flow time of a sample weight or pre-specified sample volume, as well as sample weight, which falls within a specified flow time.

• RAW MATERIAL TESTIN: To ensure quality of plastic raw material.
• MASTER BENCH TESTIN: For routine testing of raw material quality, crosschecks, & dentify Quality.
• MANUFACTURING QUALITY CONTROL: For eliminating any chance of plastic quality.
• CONSUMER GOOD: To select & identify the right plastic for every products.
• PACKAGING PRODUCT MATERIAL TESTING: ENGINEERING
• NOVA-MFI.Tester isspecifically useful where high precis ion is reqd.to manufacture plastic components for electronic equipments,ammunition & automobiles etc.: EDUCATIONAL
• For Engg.Colleges, Polytechnic’s, I.T.I’s Training and Practicals etc.: STANDARD
• To ensure quality of plastic raw material.: TEMPERATURE
• For routine testing of raw material quality, crosschecks, & dentify Quality.: RESOLUTION
• For eliminating any chance of plastic quality.: CONTROL ACCURACY
• To select & identify the right plastic for every products.: STOP WATCH/DIGI.TIMER
• NOVA-MFI.Tester isspecifically useful where high precis ion is reqd.to manufacture plastic components for electronic equipments,ammunition & automobiles etc.: WEIGHT
• For Engg.Colleges, Polytechnic’s, I.T.I’s Training and Practicals etc.: PISTON WITH INSULATEDF TOP.
• STAINLESS STEEL ORIFICE: Bore size 2.095 +/- 0.005mm.
• POWER SUPPLY: 230 V, Single Phase.

Reference standards- ASTM-1238, ISO-1133, IS-2530 Method- A- A System status- Digital Temperature controller- Micro processor based double display PID controller Temperature range- Ambient to 300°C Temperature resolution- 0.1°C Accuracy- ± 0.1°C Timer range- 0 - 999 second

This Instrument is in according to ASTM D 1238, BS, DIN ,ISO,IS (Indian Standard) or according to customer’s required specification Temperature range up to 400°c with accuracy ±1°c. Resolution 0.1°c PID based temperature controller with auto-tune facility Timer: Digital timer Range up to 999.9 min/ 999.9 sec., Having preset facility and buzzer output Applied weight manual

The Deepak Emitter Flow Rate Variation Tester is designed to determine the mechanical and functional requirements of irrigation emitters, and the data to be supplied by the manufacturer to permit correct installation and operation in the field. The apparatus confirms to IS-13487 :1992 standard. This test applies to emitters (with or without pressure regulation) intended for irrigation. This test does not apply to emitters which are an integral part of the pipe (during manufacturing as well as micro tubing). FEATURES ½ H.P. Motor. Make : Crompton Greaves 28 Stations (seven stations /per pipe) Digital timer 0 to 99 min. with buzzer system Pneumatic/manual funnel stand movement integrated with timer Pressure Gauge Range: 0 to 4.2 kg /cm2 (02 nos.) With 0.02 Kg/cm2 least count Main line & sub main line pipes made with SS Water Tank Size: length: 48", width: 18", height: 12" Water tank is made by stainless steel 16 gauge sheet Power Requirement: 220/230 V AC, 50 Hz Single Phase Compressed air line (max. 6 kg/cm2) is required

Melt Flow Index Tester, Universal tensile tester, Notch Cutter