Flu-Tef Industries Narol, Ahmedabad, Gujarat

The cable possess all the unique electrical and mechanical properties of PTFE and are available in size from single wire screened or and jacketed up to cable with a maximum of 66 pairs twisted and or screened and or jacked as per required.

1. Conductor : Stranded silver plated high Strength copper alloy wire. 2. Insulation : PTFE Taped and fused. 3. Filler : 2 PTFE rod filler Twisting : 2 Core twisted together with 2 filler 4. Shield : Round Braided shield of silver Plated high strength copper alloy wire . Coverage : 90 % minimum 5. Jacket : PTFE taped & sintered.(Thickness : 0.25mm nom) Color : Light blue

Operating Frequency : 10 MHz maximum

ALL STANDARD RG CABLES ARE ALSO AVAILABLE IN TRIAXIAL VERSION. SHIELD-SHEATH-SHIELD-SHEATH. CONSTRUCTION ASSURES MUCH BETTER ELECTRICAL SHELDING.

Our products are used in state-of-art high technology equipment and system where reliability is of paramount importance. Reliability is built into the products by optimizing designs thro comprehensive testing.

The tape shall be supplied on cylindrical cores having an internal diameter of 76mm.The roll diameter shall be depends on tape width and it shall be minimum 100mm and maximum 250mm.

We are rightly acknowledged as a quality conscious organization. Thus, we have been awarded with ISO 9001-2008. In this aspect, we have set up a fully equipped quality control unit in our facility.Our products are used in state-of-art high technology equipment and system where reliability is of paramount importance. Reliability is built into the products by optimizing designs.

SEMI-RIGID Co-axial cable are manufactured as per JSS 6145 MIL – DTL - 17 H Specification. 1. Solid conductor made up of Silver plated copper clad steel (SCCS) 2. Dielectric of PTFE 3. Outer conductor made up of Deoxidized & annealed Electrolytic Bare or tin plated copper tubing

These cables are manufactured by using ultra low Density Dielectric which reduces the weight & insertion loss when compared to standard Microwave Cables.

Keen on procurement of Rf Coaxial Cable? We are one of the well known Rf Coaxial Cable Suppliers Being a quality-conscious firm, we are offering nothing short of the best quality products from Rajkot(India).

Obtaining our superior grade product range is easy as we are based in Rajkot(India), which is well connected by air, road and rail. Buyers can rely on us for on-time and safe delivery as we are aided by modern transit facilities.

Electrical grade RoHS complied PTFE unsintered tape is manufactured in full range of eleven colour:The tape is available in range of widths from 6.35mm(0.25") upwards and nominal thickness ranging from 0.05mm (0.002") upto and including 0.25mm ( 0.010").The tape shall be supplied on cylindrical cores having an internal diameter of 76mm.The roll diameter shall be depends on tape width and it shall be minimum 100mm and maximum 250mm.

PTFE Multi core cables for Instrumentation and control applications are manufactured as per MIL-DTL-27500H JSS 51038 specification to meet specific customer requirements.The primary wire are PTFF insulated meeting requirements of JSS 51034 MIL-W-16878BS3G210NEMA HP3. The cable possess all the unique electrical and mechanical properties of PTFE and are available in size from single wire screened or and jacketed up to cable with a maximum of 66 pairs twisted and or screened and or jacked as per required.

1. Single or multistrand conductor made up of silver or Nickel plated Copper or Copper Alloy. 2. Spiral wrapped and fused PTFE Insulation. Bicolour combination is available on request. eg. WhiteRed means Red stripe over white base color. PTFE wires are manufactured as per JSS 51034BS3G210NEMA HP3 specification. Operating Temperature -65°C to 200°C. Excellent mechanical and electrical properties with a Small size & weight .

Color : White/Red

These sleeves are approved by LCSO Ministry of Defence as per JSS 54802:Sleeving shall be manufactured from PTFE tape spiral wrapped and fused process.PTFE Electrical Sleeving meets the performance requirements of JSS 54802BS 2848 Type 6 specification. Operating Temperature form -65°C to +250°C Resistant to attack by lubricants, Hydraulic, Aircraft or Rocket fuel, atmospheric conditions and virtually all chemicals.

The primary wire are PTFF insulated meeting requirements of JSS 51034 MIL-W-16878BS3G210NEMA HP3. The cable possess all the unique electrical and mechanical properties of PTFE and are available in size from single wire screened or and jacketed up to cable with a maximum of 66 pairs twisted and or screened and or jacked as per required.

Wire as per mil specification datasheet MIL-W-2275932 to 35 and MIL-W-2275941 to 46 are insulated with modified radiation cross linked ETFE polymer. This wire provides one of most comprehensive wiring product ranges for aerospace users. The wire available in light weight and normal weight. Light weight having single wall insulation and normal weight wire having dual wall insulation. Single wall wire constructions are available in 0.152mm (0.006inch) nominal wall thic

The primary wire are PTFF insulated meeting requirements of JSS 51034 MIL-W-16878BS3G210NEMA HP3. The cable possess all the unique electrical and mechanical properties of PTFE and are available in size from single wire screened or and jacketed up to cable with a maximum of 66 pairs twisted and or screened and or jacked as per required. 1. Conductor 2. Core insulation : Spiral wrapped and fused PTFE tape. 3. Braided shied 4. Jacket : PTFE tape wrapped & fused

Standard Co-axial Cable RG196, RG187, RG188, RG400 also available in low noise version. Application of a semi conducting layer of graphite between the core and the screen enables a decrease in audio noise due to oscillation, vibration etc.

The wire available in light weight and normal weight. Light weight having single wall insulation and normal weight wire having dual wall insulation. Single wall wire constructions are available in 0.152mm (0.006inch) nominal wall thickness and dual wall wire constructions are available in 0.25mm (0.010inch) nominal wall thickness.

Wire as per mil specification datasheet MIL-W-2275932 to 35 and MIL-W-2275941 to 46 are insulated with modified radiation cross linked ETFE polymer. This wire provides one of most comprehensive wiring product ranges for aerospace users. The wire available in light weight and normal weight. Light weight having single wall insulation and normal weight wire having dual wall insulation. Single wall wire constructions are available in 0.152mm (0.006inch) nominal wall thickness and dual wall wire constructions are available in 0.25mm (0.010inch) nominal wall thickness.

These cables are manufactured by using ultra low Density Dielectric which reduces the weight & insertion loss when compared to standard Microwave Cables.

These cables are designed for low loss, stable operation from the relatively low frequencies through the higher frequencies in the microwave and radar regions of the frequency spectrum. Cables may also be used as circuit elements, delay lines or impedance matching device.