Flush Bottom Valve Dealers in Ghodasar, Ahmedabad

• Country of Origin: India
• Type: Flush Bottom Valves
• Application: Water Fitting
• Feature: Blow-Out-Proof, Casting Approved
• Pressure: High Pressure
• Structure: 2way
• End Connection: Butt Weld
• Port Size: Female
• Pack Type: Carton Box

A flush bottom valve is a type of valve that is commonly used in the water treatment industry. It is designed to provide a convenient and reliable way to drain liquids and slurries from tanks or vessels. The valve is installed at the bottom of the tank, and its flush design allows for complete drainage of the contents.

Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. Ours is a reckoned name in this domain and actively involved in offering quality-centralized product range that is designed and developed using the qualitative raw material.   Electrical Actuator Details: Manufacturer - Cair Euromatic Automation Pvt. Ltd. Brand / Model - Cair / Mod Approvals     - Design (Tuv) / Iso 9001:2008 / Ce / Iec Characteristic  - On - Off Type / Modulating Type Travel Angle - 90 Degree Indicator     - Continuous Position Indicator Supply - 220v Ac , 50 Hz Body Material - Aluminum Alloy Ambient Temperatre = -10°c ~ 55°c Motor Insulation - Class F Protection Class  - Ip 67 – Weather Proof Limit Switch - 1 No + 1 No Output Of 220v Ac Position On Power Fail - Stay Put Manual Override - Provided   Details Size - 6”X8” / 8”X10” / 10”X12” / 12”X14” MOC - WCB / CF8 / CF8M Seals - PTFE / CFT/ GFT/TFM/ PEEK Pressure - 150# Temp = Upto 180°C / 250°C Class - 150# Ends - Flanged Type

Specifications Model FTB Design Flush Bottom Wafer type Ball Valve Body WCB CF8 CF8M CF3M Body Seat PTFE GFT CFT PEEK TFM Size 1" to 12" Ball CF8 CF8M CF3M Seals PTFE Temprature up to 180° C Pressure Up to 10 BAR Ends Flanged End 150 Class.

• Country of Origin: India
• Body: DI/WCB/SS
• Bonnet assembly: DI/WCB/SS
• Spindle: MS/WCB/SS
• Lining: PFA/FEP/PVDF/PP
• Grand: PTFE
• Valve seat: PTFE
• Grand cap: DI/WCB/SS
• Wheel: MS
• Fasteners: MS/SS
• Visual Test: As Per API 598
• Hydro Test For shell: 20 Kg/cm
• Hydro Test For Sleeve: 10 Kg/cm
• Pneumetic Test: 6 Kg/cm
• Spark Test: 15 KVDC

• Size: 50 mm x 75 mm, 100 mm x 75 mm, 100 mm x 150 mm sizes
• Material: Metal
• Application: Gas Fitting, Oil Fitting
• Weight: 10-20kg
• Pressure: Medium Pressure
• Feature: Durable, Good Quality

PTFE Lined Flush Bottom Valves that we provide have been engineered for use in highly corrosive liquid services. This PTFE Lined Flush Bottom Valve has a cast ductile iron body with a flouropolymer lining that is corrosion resistant. This PTFE Lined Flush Bottom Valve is quite suitable for high temperature applications. With us, you can avail these PTFE Lined Flush Bottom Valves in both manual and automated options. Our company provides these PTFE Lined Flush Bottom Valves at quite affordable prices. Details : Highly corrosion resistant Toxic liquid services Heavy duty construction

• Size: 25 MM TO 200 MM
• Material: SS 304,SS 316
• Country of Origin: Made in India
• Valve End Type: Y Type
• Brand Name: GLOBAL
• Working Pressure: 150 bar
• Packaging Type: Box

We are offering flush bottom tank valve. Body material options ductile iron ggg40.3 astm a395 cast steel astm a216 gr.wcb lining material options pfa – astm d 3307 fep – astm d 2116 technical specification flange : as per ansi b16.5 b16.42 lining thickness : 3 to 5 mm test & inspection data hydraulic test : seat – 10 kgcm2 pneumatic test : sea t – 6 kgcm2 spark test : 15 k.v. D.c

• Size: 80 x 50 mm, 100 x 80 mm and 150 x 100 mm
• Material: PFA
• Brand Name: Polycoat
• Model: Hand Wheel Operated
• Usage/Application: Industrial
• Head Shape: Round
• Minimum Order Quantity: 1 Piece

• Feature: High performing standards, Low maintenance cost, Precise construction

• Material: Cast Steel
• Country of Origin: Made in India
• Application: Industrial
• Size: 1" / 25 NB
• Surface Finish: Polished
• Temperature: 315 to 429 DegreeC

• Seat: ASTM A 351 GR. CA 15 (13% Cr.)

Flosteer Boiler Blow Down Valves are Bolted Bonnet Design & Parallel Slide Type. Flosteer Boiler Blow Down Valves are available with Rack & Pinion arrangement for easy and quick operation. Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. Deep stuffing box is providing to assure tightness and maximum packing life. FLOSTEER Boiler Blow Down Valves available under any Third party inspection including IBR (Indian Boiler Regulation) in size range from 25mm to 100mm up 900# pressure rating.

“Y” TYPE Flush bottom valves are used to discharge Liquids &Slurry from the bottom of Reactors, Receivers & huge Tanks. “IVE” Flush Bottom valves are available in design of Disc opening into the Tank ( vessel opening design) & Disc lowering (inside valve opening design) into the valve body. Flush bottom valves with disc opening into the tank or opening upwards is the most commonly used. It is used where enough space is available between bottom pad and the starrier of the tank. The mass load inside the tank helps closing & tight shut off the flush bottom valve. KEY FEATURES AND BENEFITS :- Unique design of IVE flush bottom valves assure “Zero- Hold Up” in the bottom pad of the tank. And facilitate the free flow and quick discharge of the liquid or slurry through the valves. Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications. Conical Metal to Metal disc seating/ PTFE seating with option of fixed or Renewable seat. Further metal seating can be hard faced by Stellite TM where distortion of seat by aggressive liquid or slurry is common. Valves available in the size range of 15 NB to 250 NB in BS, ANSI & DIN standards. Available in the design of Jacketed, Actuated & Lined. Offered for Sanitaryaseptic application. IVE Flush Bottom vales can also be provided with the temperature sensors to measure the temperature in the vessel. Bolted Stuffing Box (Gland), easily adjustable & with Repackable service. Rinsing & Non Rinsing stem with outside ACME thread.

• Size: 40 NB to 300 NB
• Features: Robust designing, Low maintenance, Resistant against corrosion ,High tensile strength ,Longer service life.
• Item Code: FBTM-2167

Dharmi Engineers offers a range of Flush Bottom Ball Valves. Dharmi Engineers Flush Bottom Ball Valves have been proven in service application for over 10 years Dharmi Engineers mfg. High performance Flush Bottom Ball Valve as per international design to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. Generally Flush Bottom Ball Valve body is modified by adding Inlet oversize flanges. As example: 2" x 3" Flush Bottom Ball Valve has the nominal bore of 2" (DN 50), the Inlet flange (Vessel Side) size is 3"(DN 80) and outlet flange size 2”. It allows enough space for bolting clearance & insulation at vessel bottom flange. Our manufacturing range of Flush Bottom Valve design is as per Fire Safe Design API 607, Solid Ball with ISO 5211 Mounting Pad Dimension and available in Steel Steel CF8CF8MCF3CF3MCN7MWCB, SS 304316304L316LAlloy20Hast AlloyCast Carbon Steel material. Flush Bottom Ball Valve with Motorized Electrical Actuator Operated and Pneumatic Actuator Operated also available with required accessories like Solenoid, Limit Switch, Filter Regulator, Relay, PID, Valve Positioner etc.

• Temprature: up to 180° C

Design Flush Bottom Wafer type Ball Valve, Body WCB CF8 CF8M CF3M, Body Seat PTFE GFT CFT PEEK TFM, Size 1" to 12", Ball CF8 CF8M CF3M, Seals PTFE, Temprature up to 180° C, Pressure Up to 10 BAR, Ends Flanged End 150 Class.

• Material: SS 304/304L, SS 316/316L
• Size: Screwed and socket weld ends, 15 mm to 50 mm, flanged ends, 15 mm to 300 mm
• Temperature: -20° - 120°C

We have acquired one of the top positions in the industry for providing SS Jacketed Flush Bottom Valve to our clients at industry leading prices. These are available in different specifications as per client’s requirement and designs. Before making any item, we maintain proper communication with the client to understand their requirement in better way.   Our organization has profound & vast experience in providing water treatment services. With our round the clock service facility our customer experience the benefit our quality product. We are well equipped with all modern and advanced technology that enables us to work in any environment & circumstances. We also handle all customized operations. They are widely used discharging materials from processing tanks.   Specializations Made using high tech technology Standard quality raw material No need of maintenance Damage & leak free

Jacketed Flush Bottom Valve, purified water distribution systems, Brass Foils