Forged Steel Valves Dealers in Memco, Ahmedabad

J. D. Controls Forged Steel Gate Valves are Bolted Bonnet, outside screw and yoke type, Rising Spindle construction Body and bonnet made from high quality forgings. J. D. manufacturing Forged Steel Gate Valves in size 1/2 (DN15) to 2 (DN50) to suit various critical, non-critical applications and pressure rating up to 1500 class in Regular (Reduce) bore & Standard (Full bore) design. DESIGN & TESTING INTERNATIONAL STANDARD:  Valve Design                           : API 602 / BS 5352 Pressure Testing                     : API 598 / BS 5146 Face To Face                         : ANSI B 16.10 Butt Weld End                         : ANSI B 16.25 Socket Weld End                    : ANSI B 16.11 Screwed End                          : ANSI B 1.20.1(BSP/NPT)   SALIENT FEATURES: Body & Bonnet made from high quality forging. The Forgings are precision machined for high performance Leak Proof Body-Bonnet Joint With Spiral Wound Gasket Bi-Directional Shut-Off Ground Finish Stem Self Aligning Two Piece Gland Die moulded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature. Deep stuffing box is providing for tightness and maximum long packing life. Swinging Eye Bolts facilitate easy access to the stuffing box. Back seating feature facilitates repacking of the stuffing box on line with the valve in fully open position. Stellited Wedge (Gate), Seat Ring & Back Seat can also be offered on special request.

Forged steel globe valve, All Globe Valve stem is made from solid one piece construction. The yoke bush of Globe Valve has a long thread engagement for accurate stem alignment.Body & Bonnet made from high quality forging. The Forgings are precision machined for high performance, Leak Proof Body-Bonnet Joint With Spiral Wound Gasket, Die moulded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature.

• Temperature: 425oC

Forged steel valves Ends Flanged (Drilled & Undrilled) As Per Ansi B 16.5 CLASS – 150 R.F. Body Hydrostatic Test Presure Twice The Set Pressure Ibr Approved With Discharge Capacity Constant Of '24' Accurate Spring Designs To Achieve Blow Down Within 5% Which Saves Wastage Of Steam. Soft Seated Safety Relief Valve Are Used For Low Temperature And Critical Application.

Forged steel globe valve Memory Seal Seats Compensate automatically for wear and fluctuations of pressure and temperature. Solid cup and cone type PTFE Stem Seal- Adjustable. Stem bearing in Gland nut reduces Side thrust effect.

• Body & Bonnet: FCS (A -105)/ F 304/ F 316/ F11/F22
• Wedge Plug/ Seat / Spindle: 13% Cr / T410 / T304 / T316
• Yoke Sleeve / Nut: ASTM A 439 Gr D2 / Al-Bronze
• Gasket: SPW SS 304 / SS 316 With CAF Graphoil
• Gland Packing: Graphite Asbestos & Inconel Wire Rope

FFV Forges Steel Valve Gate Valve,Globe Valve,Check Valve make Out Side Screw & Yoke Type Bolted Bonnet Having SS 410 Wet Parts,Full Bore.   Features Manufacturing Std:BS 5352 Testing & Inspection Std:API 602 End Connection Socket Weld/Screwed end/Butt Weld/Flange end/800#

We are well known for supplying of wide variety of Forged Steel Valve.

• MOC :: A 105 / F 304 / F 316 L
• Size Ranges :: 08 NB TO 50 NB
• Design And Mfg Std :: BS EN ISO 17292 (BS 5351) / 12516 / API 608 / 6
• Inspection And Testing Std :: BS EN ISO 12266 (BS 6755 Part – 1) / 12569 / API
• Face To Face :: Manufacturing
• Screwed End Connection Facing Std :: ASME B 1.20.1 /16.11/EN 12760
• Socket Weld End Connection Facing Std :: ASME B 16.11
• Buttweld End Connection Facing Standard :: ASME B 16.25

Appex make drop forged high performance forged steel ball valves gives outstanding performance in various applications like oil, gas, petrochemicals, steam, water etc. These valves are extremely reliable for high pressure application due to its best physical characteristics like refined grain structure and close molecules. These valves are being designed taking into consideration of online maintenance. Whenever any changes or maintenance require, Valves body can be removed from pipe line without dismantling valve.

SAP Forged Steel Valves have been designed to meet the requirements of API 602/BS 5352/ASME B 16.34 Socket weld ends dimensions confirm to ASME B 16.11 Screwed ends dimensions confirm to ASME B 1.20.1 Outside screw and yoke construction The gland is of two piece self aligning type Back seat arrangement for Gate and Globe Valves. Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77 / 312

We are offering forged steel valves. Available range : check valve, globe valve and gate valve standard design features forged body and bonnet graphite filled stainless steel gasket self aligning gland/gland flange high tensile bolts ductile iron handwheel blackodised body/bonnet to prevent rusting (only for carbon steel) details operation : handwheel, electrical actuator optional features : welded bonnet, extended bonnet, bolted bonnet with seal-weld size : from ½” to 2” ansi class : #800, #1500 and #2500 material : carbon steel, stainless steel and alloy steel ends : socket-weld, screwed, flanged or butt-weld.

Check Valves, high pressure globe valves

• Design Standard: BS 5352
• Ends :- Socket weld: ASME B 16.11
• Screwed Ends: ASME 2.1 / BSPT – BS 21
• Buttweld: ASME B 16.25
• Testing: API 598

GATE VALVESStandard Features• BOILTED BONNET• OUT SIDE SCREW & YOKE TYPE,• RISING STEM• REDUCE BORE• PLUG TYPE DISC   Available On Request• HARDFACE WEDGE• FULL BORE DESIGN• WELDED (SEAL WELDED) BONNET• AVAILABLE IN FORGED CARBON STEEL/FORGED STAINLESS STEEL• DIFFERENT TYPE OF TRIMS AS PER CUSTOMER SPECIFIC REQUIREMENTS   CAST STEEL GATE VALVE UOTSIDE SCREW & YOKE TYPE, BOILED BONNET RISING STEM GlOBE VALVES:Standard Features   • BOILTED BONNET• OUT SIDE SCREW & YOKE TYPE,• RISING STEM• REDUCE BORE• RENEWABLEE SEAT RING LIFT CHECK VALVES:Standard Features • FORGED BOLTED COVER• REDUCE BORE• RENEWABLEE SEAT RING   Available On Request   • HARDFACE WEDGE• FULL BORE DESIGN• WELDED (SEAL WELDED) BONNET• AVAILABLE IN FORGED CARBON STEEL/FORGED STAINLESS STEEL• DIFFERENT TYPE OF TRIMS AS PER CUSTOMER SPECIFIC REQUIREMENTS Available On Request • HARDFACE WEDGE• FULL BORE DESIGN• WELDED (SEAL WELDED) BONNET• AVAILABLE IN FORGED CARBON STEEL/FORGED STAINLESS STEEL• DIFFERENT TYPE OF TRIMS AS PER CUSTOMER SPECIFIC REQUIREMENTS

Forged Steel Valve, Double Gland Pulp Valve, GLOBE VALVE, FLANGED END

Over the years of dedication, we have been a prestigious manufacturer of Forged Steel Valves to our globally scattered clients. They are made covering size range 25mm to 300mm & higher as per the special requirements suitable wide range of pressure rating as per the customers requirements varying from class 150 to 1500.

forged steel lift check valve, orthopedic knee joint, tappet shaft

Forged Steel Ball Valves, Cast Iron Double Flange Sluice Valve, Siphon elbow

Forged Steel Ball Valves, Knife Gate Valves

Fire Safe Ball Valves, Y Strainer Valve, Electrically Operated Valves