Frascold India Pvt. Ltd Thaltej, Ahmedabad, Gujarat

Two-stage series The range of compressors with double compression stage is optimized for low-temperature applications and deep freezing. All the models provide for a system of subcooling of the liquid which allows to increase the cooling capacity and efficiency of the entire plant.The mechanical dimensioning of all the components has been optimized specifically for the particular characteristics of the low-temperature applications, making these extraordinarily reliable compressors.

Standard and ECOinside series Suitable for a wide range of applications in individual systems and multi-compressor cascade systems, all models in this range are inverter compatible. The entire range is quite, smooth-running and highly efficient in all temperature ranges.A small footprint and large selection of accessories brings additional flexibility and all models are compatible with our revolutionary Reduced Suction Head (RSH) capacity control system. Advanced electronic protection system is built into every compressor, the Diagnose technology is standard or optional available.   RSH - Patented Capacity Control Frascold's patented Reduced SuctionHead technology allows our reciprocating compressors to run unloaded indefinitely. Unlike standard capacity control, RSH capacity clets the compressor run without overheading while energized. This revolutionary feature prvides application flexibility while reducing heat, vibration and damage from unloading stress. 2,4,6 and 8 Cylinders Reduced wear and vibration Run unloaded indefinitely Efficient & reliable unloading Frascold exclusive solution Retrofit existing compressors

Screw compressors for refrigeration Product Line OverviewWide range of twin screw compressor models with displacement from 120 to 538 m3/h (50Hz) for refrigeration applications, air conditioning, heat pumps.Appropriate for traditional HFC and HCFC-based refrigerants, HFO blands and Hydrocarbons. The whole range can operate with inverter. • Easy installation and accessibility • Wide operational field • For HFC, HFO blends and Hydrocarbon refrigerants• High specific and seasonal efficiency• Low noise in all working conditions • Built-in electronic protection system • Step capacity control and unloaded start• All models compatible with VFD • Connection for economizer circuit • Wide selection of accessories• 2-year standard warranty   For standard refrigerants Wide range of models with displacement from 120 to 538 m3/h (50 Hz) and nominal power from 30 to 180 Hp.All compressors can use all standard refrigerants like HFC, HCFC based refrigerants and HFO blends, and they are mainly used for LT or MT process applications but also for AC systems.Electronic protection system is built into every compressor or Diagnose technology as optional.Efficient, not noisy and reliable. The maximum efficiency is obtained with two different Vi (compression ratio) and it is possible to extend the operating field with oversized electric motors. Step capacity control, step, done by means of a slide valve, and use of economizers allowed with the optional connection kit. All compressors can run with external VFD.A large selection of accessories brings additional flexibility and all models.           RTS and NR series Models: 35 Displacement: 120 - 538 m3/h  Motor Power: 30 - 180 HP    RSH - Patented Capacity Control Frascold's patented Reduced SuctionHead technology allows our reciprocating compressors to run unloaded indefinitely. Unlike standard capacity control, RSH capacity clets the compressor run without overheading while energized. This revolutionary feature prvides application flexibility while reducing heat, vibration and damage from unloading stress. 2,4,6 and 8 Cylinders Reduced wear and vibration Run unloaded indefinitely Efficient & reliable unloading Frascold exclusive solution Retrofit existing compressors  

Screw compressor open type Product line overviewOpen-drive screw compressors ATS series is designed to provide a high cooling capacity, with or without economizer, operating with any HFC, HCFC, HFO refrigerant and also Ammonia.The main use is in marine/industrial cooling and process cooling, but they have also good performance in heat pump and air conditioning systems. The compressors can operate in parall installation with common oil separator.All compressors fit a high quality mechanical sealer suitable to all refrigerants, the operation is silent and vibration-free, besides, the ATS can be easily coupled to standard IEC electric motors, by means of optional coupling joints for direct connection. • Wide operational field • For HFC, HCFC, HFO blends and Ammonia• Low noise and no vibrations at all operating conditions• Step capacity control• Easy installation and accessibility • Minimal and essential maintenance• High quality mechanical sealer suitable to operate with any refrigerant• Direct coupling with any IEC electrical motor• Wide selection of accessories• 2-year standard warranty

LBT units - Tropical climate zones   List of available accessories Accessory Accessory code Phase cut control for single phase fan motor [1] [2] T00ECA1485 Oil separator USOS16 Package (sight glass, filter dryer, shut-off valve, high/low pressure switch, high pressure switch for condensing control, electric box only for certain models) Con scatola elettrica Protective housing: mounted on the unit [3] USHAOU17-LB Protective housing: shipped stand alone [3] USHAOU17 Check valve on the discharge line T00EC1351LB Solenoid valve on the liquid line (24Vac) [4] T00ECA1297LB Note [1] The phase cut control regulator is available only with single-phase fan motor; if You need it, please choose units with single phase fan motor (that ends with "M") or request the "M" version even for units that are has the final letter "T" (three phase fan motor) as default. [2] In case of package, with this optional, the high pressure switch is not supplied [3] For the units with compressors models A, B, D VS series (with integrated inverter) it's not possible to use protective housing [4] In case of package, with this optional, the liquid line valve is not supplied    

Compact twin screw compressors Product Line OverviewWide range of twin screw compressor models with displacement from 199 to 1085 m3/h (50Hz) for refrigeration applications, air conditioning, heat pumps.Appropriate for traditional HFC and HCFC-based refrigerants, HFOs and Hydrocarbons. The whole range can operate with inverter. • Wide choice of configurations• Easy installation and accessibility • Wide operational field • For HFC, HFO and Hydrocarbon refrigerants• High specific and seasonal efficiency• Reduced oil carry-over• Low noise in all working conditions • Electronic protection system • Step or stepless capacity control• All models compatible with VFD • Models with integrated VFD (CX-IT series) • Wide selection of accessories• 2-year standard warranty  

VS series with built-in inverter In this range of compressors, the integrated frequency inverter enables continuous adjustment of capacity; this allows to minimize the variations of the suction pressure and avoids continuous switching-on and off of the compressor, obtaining important savings on energy costs, a greater thermal stability of the system and a significant lowering of the noise level.The inverter is factory pre-programmed, it is operated by an external PID controller or via direct connection of a pressure transducer to be mounted on the suction line.The adjustment of all parameters that control the inverter can be customized to suit the specific application.   FRASCOLD offers a full range of compressors able to cover a variety of applications in the areas such as Commercial and Industrial refrigeration, Mobile refrigeration, Air conditioning, Heat pump.Over the years, different product ranges have been developed and enlarged to meet the requirements dictated from the evolution of the market, both at application level and at normative level. The current product portfolio is undoubtedly one of the widest on the market.Frascold compressors distinguish themselves, in addition to higher efficiency and quietness compared to market standards, also for several and unique innovative solutions.With the current range of compressors, Frascold can meet various needs and is ready to deal with new challenges of the market, by offering dedicated solutions for: Natural Refrigerants (CO2, NH3, hydrocarbons). HFO Refrigerants. New refrigerant mixtures and "low GWP".Constantly Frascold is engaged in developing products and technical solutions for the near future, in collaboration with the main players in the refrigeration market