Fuel Handling Systems Dealers in Ahmedabad

• AC LPG: 4000

We are offering ac diaphragm lpg transfer pump by utilizing skills of our dexterous workforce, we are offering a comprehensive assortment of ac diaphragm lpg transfer pump. Our professional manufactures this pump by employing optimum quality raw material and sophisticated technology in adherence to the set industry standards. Owing to features like precise design, resistant to corrosion and easy installation, our offered product has been able to earn a lot of popularity in the market. features: sturdiness strong design rust proof detailed product description: these pumps are made to fill lpg cylinders in cars buses trucks from other lpg cylinders. Attach one pipe to the lpg cylinder & one end to the car lpg tank and then switch on the motor. The cylinder will be filled within a few minutes. We also have a manual pump with the same function. Specifications: capacity 15 kg7 minute i.e. 2.14 kgminute max pressure 14 kgcm 2. Mhp required 0.5 hp , single phase,1450 rpm , 220 volts, 50 hz, ac supply ( 110 volts or 60 hz available on request). Pump type diaphragm pump. Standard accessories inlet valve, inlet pipe , filter , outlet pipe, handle, outlet valve suitable to fit in car bike. Free spares with pump set of �o� rings & diaphragm packing weight 17,500 kg packing dimensions l x h x w 13 x 10 x 5.7

We have the expertise to provide complete Coal Handling System which includes Grizzly Hopper, Crusher Feeding Belt Conveyor, Magnetic Pulley, Suspension Magnet, Coal Crusher, Vibrating Screen, Recycle Elevator and Bunker Feeding Conveyor Elevator.Coal Handling System finds its usage in coal based thermal power plants and coal handling plants for transferring coal from trucks, wagon tippler hopper through bucket elevators belt conveyors to boiler bunkers.

Our organization is well-regarded as LPG Conversion Kit Manufacturer, Supplier and Exporter from Ahmedabad, Gujarat. We hold expertise in offering a comprehensive range of LPG Conversion Kit to the clients. These LPG Conversion Kits are well-known for their high performance, fuel efficiency and are fully authorized by Longas. LPG is an alternate for the CNG, which also curbs down the air pollution. LPG is used in vehicles in various cities as an automobile fuel for its easy availability and transportability. We offer LPG Conversion Kits at affordable prices to the clients. Features Of LPG Conversion Kit Fuel efficientHigh performanceLow cost

Ethylene Gas Absorber (long Life), Zeolite, Alumino Silicate Powder

• Color: SILVER

Ash handling refers to the method of collection, conveying, interim storage and load out of various types of ash residue left over from solid fuel combustion processes. The most common types of ash resulting from the combustion of coal, wood and other solid fuels. bottom ash. bed ash. fly ash.

• Country of Origin: India
• Type: Lpg Pumps
• Certification: ISO 9001:2008 Certified
• Condition: New
• Warranty: 1 Year
• Pump Type: Manual LPG Pump Piston Type 4 way non Return Valve Arrangement,
• Pump Make: “MALHAR”,
• Pump Capacity: 15 kg/15 Minute i.e. 1 kg/Minute , depend on nos of stroke per minute,
• Pump Model: MMLPG-1,
• Suction X Delivery sizes: ¼ ” x ¼ ”,”
• Maximum Pressure: 20 kg/cm2
• Pump Weight: 6 kg approx

Based in Ahmedabad (India), we are distinguished for manufacturing, supplying and exporting the advanced design of Fuel Unloading Systems across India and overseas. Fabricated utilizing supreme raw materials, these Fuel Unloading Systems are in conformance with the international quality standards. Moreover, for ensuring defect-free delivery of products, strict inspection is conducted by our quality engineers. One can avail from us Diesel Tanker Unloading also. These systems are reasonably priced. Features : Accurate measurement Precisely designed Easy to maintain

• Type: Handling System
• Application: Industrial
• Automatic Grade: Fully Automatic
• Driven Type: Hydraulic

Features: In a coal basedthermal power plant the initial process in the power generation is “Coal Handling”. So in this article i will discuss the overall processes carried out at a Coal Handling plant in a coal based thermal power generating station. The huge amount ofcoalis usually supplied through railways. A railway siding line is taken into the power station and the coal is delivered in the storage yard. The coal is unloaded from the point of delivery by means ofwagon tippler. It is rack and pinion type. The coal is taken from the unloading site to dead storage by belt conveyors. The belt deliver the coal to 0m level to thepent houseand further moves totransfer point8. The transfer points are used to transfer coal to the next belt. The belt elevates the coal tobreaker house. It consists of a rotary machine, which rotates the coal and separates the light dust from it through the action of gravity and transfer this dust to reject bin house through belt. The belt further elevates the coal to thetransfer point7 and it reaches the crusher through belt. In thecrushera high-speed3-phase induction motoris used to crush the coal to a size of 50mm so as to be suitable formilling system. Coal rises from crusher house and reaches the dead storage by passing throughtransfer point8.

Our organization is reckoned as one of the prime Manufacturers, Exporters and Suppliers of Brass LPG Three Key Regulator from Gujarat, India. Brass LPG Three Key Regulator is extensively used in various gas tanks and fire extinguishing system to control the oxygen emission. This Three Key Regulator is built special type non-return valve and main 'off- on' key is locked. It is available in variegated specifications to suit diverse requirements of the buyers.

The fuel processing and handling, offered by AEGIS, is used for preparation of coalligniteagro fuels to be used as a fuel in FBC Boilers, Hot Air Generators (Heaters) and other multi fuel fired systems in various industries. The fuel processing is used to produce fuel of right size suitable as per the specification of the FBC BoilersHeaters. We at AEGIS are capable of conceptualizing, designing, engineering, assembling and installing of custom fuel handling systems thereby acting as a full-service solutions provider.The entire system is conceptualized based on parameters such as fuel to be handled, capacity required, availability of space, processing required, economical considerations, etc. Following are some of the typical fuel handling systems supplied to various clients for handling various fuels.

Ash handling systems from AEGIS is used for economic and dust free handling & storage of fly ash and bottom ash. AEGIS offers mechanical ash systems that are reliable, cost effective and comes with proven performance with years of experience. Aegis has good number of installations for Mechanical Ash Handling Systems.

• Production Capacity: 5 TO 100 TPH
• Voltage: 440 V
• Phase: Three
• Brand Name: FRE
• Power Consumption: 110 kW
• Item Code: FRE-104
• FRE-104: L/C (Letter of Credit)/T/T (Bank Transfer)

• Brand Name: G S Engimech
• Warranty: 12 months
• Country of Origin: Made in India
• Type Of Fuel: Ash
• Control System: Pneumatic
• Environment: Outdoor
• Usage/Application: Pharma, Plywood, Coal, Ash, Corrugated, Tea. Snacks etc
• Capacity: 30 tph

Timely execution of mega-projects in construction Industries has led to paradigm shift with introduction of Batching plant and its product viz; RMC However two basic inputs to RMC viz cement and Fly ash are received at site in Bulkers or in bags The optimum productivity of Batching plant depends on how fast the cement / fly ash is received at site and is transferred to Batching Silo. PNEUCON has designed, manufactured and supplied user friendly system mounted on a skid; it will have options to both modes of Cement / fly ash input i.e. loose in Bulkers or material received in Bags. Conveying from Bulker to Main Silo is achieved by diverting the voluminous air flow at around 1 Kg /Cm2 Pressure. The bulker is aerated and pressurized. Opening of Bottom Valve allows cement / fly ash to fall directly in dispatch pipe. The air flow carries the material to the main Silo. The conveying rate achieved is 30 - 32 Tons per hour. When cement / fly ash is received at site in Bags, then they are manually taken to a hopper. Bags are slit and loose material is dumped in to the hopper. A specially, designed screw feeder and low pressure air insertion ensures measured flow of material in to the discharge pipe line The cement / fly ash dropped in discharge pipe are pushed ahead to main silo with the pressure of 1 Kg/Cm2. The transfer rate achieved is 12 to 15 Tons / Hour forthis mode The same operational procedures remain common for lime handling systems also. The cement handling systems in form of : - Screw Pumps (Screw Feeders) - Lime Handling Units with Silos And many other

Mechanical Ash Handling System Due to stringent environmental regulations and ever increasing power requirement has led to an increase in the amount of ash that industries need to handle safely. Aegis offer Mechanical Ash Handling Systems which is used to carry away dry ash from plant/boilers. Ash handling systems from AEGIS is used for economic and dust free handling & storage of fly ash and bottom ash. AEGIS offers mechanical ash systems that are reliable, cost effective and comes with proven performance with years of experience. Aegis has good number of installations for Mechanical Ash Handling Systems. Water-cooled / submerged conveyors can be supplied below the furnace of the boiler using any type of solid fuel. Mechanical ash handling system is available for dry ash handling. Advantages : Less capital costs Easy to maintain and less operating costs Less power costs Less maintenance requirements

• Application: Industrial
• Material: Mild Steel
• Country of Origin: Made in India
• Voltage: 220-400 V
• Surface Treatment: Color Coated
• Frequency: 50 Hz
• Features: Low energy consumption and low noise, Easy to operate, Environment protect, Reliable operation
• Air flow: Up to 5000 m3/H
• Filter speed: Up to 1.0-2.0 m/min
• Capacity: Up to 75 Ton/hr