Fume Hood Dealers in Ahmedabad

• Size: 4ft, 5ft, 6ft
• Material: Metal
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Minimum Order Quantity: As Per Customer Need

• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: Black
• Condition: New

• Material: Stainless Steel
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Height: 5ft
• Power: 220/230 Volts Ac Supply.

Fabricated out of thick Mild Steel Sheet these are designed so as to throw out toxic/harmful vapours, thus protecting costly instruments & the person working in the lab. The outer surface is finished with powder coated & inner surface is epoxy painted.   The working table top is fitted with acid/alkali resistant tiles/S.S & a small wash basin with connections provided for inlet & outlet of water. The front door moves vertically up & down with concealed counterbalanced weight. The unit is fitted with fluorescent light & a gas cock of gas/air supply. The space under the work station can be provided with storage compartments for storage purpose. The front-facing panel is fitted with 15/5 amp socket with switches for exhaust system & fluorescent light to work on 220/230 volts AC Supply.

Extensively used in pharmaceutical industries, research institutes, laboratories and public sector units, our Fume Hoods are designed in sync with the international quality standards.  We are reckoned among the prominent Manufacturers and Suppliers of Fume Hoods (HSW126) from Gujarat. Fume Hoods we make available protect laboratories from hazardous chemical gases and acid fumes. We are capable of delivering bulk orders of the Fume Hoods within the allocated time.

We are one of the well known manufacturers and suppliers of fume hood. This product is available in both wooden and steel finish and provides good work place. The offered product is absolutely risk free while performing any kind of experiment. Clients can avail this product in both standard and customized form as per their requirements. product features: • facilitated with complete exhaust system • inner body is chemical resistant • outer part is laminated with fine mica • working area of 2' x 2' x 2’, 3' x 2' x 2' • easy to install • efficient to use.

Complete Body are made of Mild Steel (M.S.) With Powder Coated. With Ducting System. Front side transprant glass door with handles. With Electrical switch board. Working Size : - 2' x 2' x 2' feet. 3' x 2' x 2' feet. 4' x 2' x 2' feet. 6' x 2' x 2' feet.

• Condition: New
• Features: Sterile hood , Biological safety mechanism , Longer service life.

• Size: 10ft, 4ft, 5ft, 6ft, 8ft
• Type: Fume Hood
• Material: Metal, Stainless Steel
• Shape: Rectangular, Square
• Application: Laboratory Use
• Color: Black, Grey, Silver, White
• Condition: New
• Finishing: Non Polished, Polished

      Introduction Fume hoods are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. Theese eqipment reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room.   Construction The main body of the fumes hood is asbestos or FRP lined. The work surface (worktable) is of stainless steel sheet. A small S.S. Sink, water tap and water outlet are provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. Hood is provided with fluorescent light for easy working in the chamber. A metal clad socket and gas cock is also provided in the chamber. The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator. Powerful exhaust assembly of 150 mm dia 20 feet long PVC ducting with rain guard. The additional length of PVC ducting will be at extra cost.   Working Area (Ft) L4 x D2 x H2L5 x D2 1/2 x H3L6 x D3 x H3

Laboratory fume hoods are a type of ventilation system with the primary function is to exhaust chemical fumes, vapors, gasses, dust, mist, laboratory hoods, SS fume hood and aerosol. Fume hoods also serve as physical barriers between reactions and the laboratory, offering a measure of protection against inhalation exposure, chemical spills, run-away reactions and fires.A typical fume hood has a box like structure with a moveable sash window. Experimental procedures are performed within the hood which is consistently and safely ventilated, usually by means of an extract blower and ductwork. Chemical fumes exhausted and diluted many times over in the atmosphere and has a negligible effect to human health. When environment concerns are of importance, an extract treatment system, often referred to as a scrubber is installed to remove most of the vapors from the exhaust air stream.

• Size: 10ft
• Type: Fume Hood
• Material: Metal
• Shape: Rectangular
• Certification: ISO 9001:2008
• Application: Laboratory Use
• Condition: New
• Finishing: Non Polished
• Height: 5ft
• Approx. Price: Air Volume

• Material: Cold Roll Steel
• Application: Industrial
• Working chamber sizes (FT): (L x DX H) 2 x 2x 2 ,3 x 2 x 2 ,4 x 2 x 2 ,6 x 2 x 2
• Feature: Multiple Working Ports
• Width: 750 mm to 2400 mm

LaboFab introduce complete fume hood solutions that integrate storage and work surfaces so that you’ll have a built-in solution when working with chemicals and other flammable materials. In addition, there are a variety of styles and designs that usually go along with choosing fume hoods or a completely integrated solution, such as those that have canopy or demonstration hoods as well as different sash types. LaboFab offers a wide range of fume hoods for every laboratory application including general purpose hoods. LaboFab fume hoods are manufactured from best quality C.R.C.A Sheets of 18/20G which are duly provides better protection from acid fumes in the lab. LaboFab fume hoods are aerodynamically designed considering most efficient airflow to the suction. Double wall feature provides easy access to utilities like Water, gas, vacuum & electricity. Fume Hood Design:   Bench Top Fume Hood Low Bench Fume Hood Walk-IN Fume Hood   Detachable base storage cabinets are provided with castors for easy maintenance, LaboFab offers variety of lining & work surfaces like Granite, ceramic, S.S., P. P. & FRP. Sash is provided with 6 mm toughened glass & counter balance is provided to achieve easy movement. High performance centrifugal blower is provided with different ducting materials like PP/PVC/HDPE etc.

• Material: Polypropylene
• Thickness: 12mm
• Air Volume: 800 CFM
• Features: Corrosion Resistance

Fume hoods are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. Theese eqipment reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room. Construction The main body of the fumes hood is asbestos or FRP lined. The work surface (worktable) is of stainless steel sheet. A small S.S. Sink, water tap and water outlet are provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. Hood is provided with fluorescent light for easy working in the chamber. A metal clad socket and gas cock is also provided in the chamber. The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator. Powerful exhaust assembly of 150 mm dia 20 feet long PVC ducting with rain guard. The additional length of PVC ducting will be at extra cost. Working Area (Ft) L4 x D2 x H2 L5 x D2 1/2 x H3 L6 x D3 x H3

Laboratory fume hoods are a type of ventilation system with the primary function is to exhaust chemical fumes, vapors, gasses, dust, mist, laboratory hoods, SS fume hood and aerosol. Fume hoods also serve as physical barriers between reactions and the laboratory, offering a measure of protection against inhalation exposure, chemical spills, run-away reactions and fires.

Laboratory Fume Hood, Laboratory Furniture, Laboratory Table

Fume Hood, Instrument Table, Working Table, Anti Vibration Table

Fume Hoods, Hot Water Heating Coil, Chilled Water Cooling Coil