Furnace Structure Dealers in Memco, Ahmedabad

• Features: • Wind Box Leak-proof welded and suitable sizes for suitable Cupolas, so as to maintain an ample supply of air at constant and uniform pressure,Tangential air admission at the top of the wind box gives an unrestricted flow,of air from blower,Special Tyu

• Size: 7x5mtr, 9x7mtr
• Type: Pit Weighbridge
• Material: Metal
• Application: Loading Heavy Vehicles
• Feature: Accurate Result, Good Capacity, High Resolution
• Weighing Capacity: 100-150ton

General Introduction : This type of weighbridge is most suitable for places with limited space e.g. non-hilly areas where the construction of pit is not a costly affair. Since the platform is in level with the ground, vehicles can approach the weighbridge from any direction. Most public weighbridges prefer this design.Benefits : Lesser Space Required (As it has no ramps) Rickshaws & Tractor Trolleys can also be weighed as platform is in flush with ground Level. No Ramp require for truck movement because it is installed in land surface level Costly Foundation Robust Load Cells and Digitizers : The most important components of an electronic weighbridge are the load cells and digitizers. EAGLE has made both of them very robust and hence, the best available in the country.Advantage : Highly Durable Girders and Plates - A truck to be weighed is directly driven to the platform of a weighbridge and hence, the platform is subjected to the entire load and vibrations created by a moving truck. Our weighbridge platforms (made of steel) are designed very carefully to withstand these loads without damage and is highly durable. The girders and plates used in our platform are selected very carefully and undergo stringent quality checks as per ISI & IS 2062 Grade. Reliable Mounting Assembly For Load Cells - The next most important component is the mounting assembly for load cells. This transfers the load from the platform to the load cells. This is a cradle assembly which is free to move in the horizontal axes and hence takes all side loads generated due to the vehicular movements on the platform. The mounting assembly consists of three parts namely, the Bottom Plate, Rocker assembly and Top Bracket. Low Resistance Cables And Weather Proof Junction Box - The signal from the load cells (in milli-volt) is carried to the digitizer, in the control room, through a 4 - core shielded cable. The cable has a very low electrical resistance and hence, no loss of signals. The cables from different load cells, in a weighbridge, meets in weather proof junction box. The junction Box is of fully molded type and houses the necessary terminal blocks for interconnection of load cell out puts. The Junction box also carries a set of surge arrestors, to protect the entire system from lightning and electrical surges.

• Melting Material: Cast Iron, NI Resist Iron And Bronze
• Max Temperature (degree Celsius): 1500-2000 degree Celsius
• Diameter: 15-36 inch
• Length: 18 inch to 13 feet
• Usage: Used In Foundries
• Cupola Furnace Range: 18"-13 Feet
• Shape: Cylindrical

• TYPE OF SCALE: PIT TYPE
• COST: More expensive due to additional construction work required
• SERVICE & SCALE REPAIRS: In some cases, more costly due to confined area restrictions
• CLEAN OUT: Done manually and very time consuming
• SCALE ISPECTION: Must be performed from inside the Pit
• RESTRICTIONS OR HAZAEDS: Some states require specified clearances underneath scale. Must also deal with OSHA and confined space hazards regulations.
• APPROACHES: 10’ Flat and level
• RAMPS: None
• ELECTRICITY NEEDED: Must have electricity for pit lights and sump pump if no gravity drain is present  

Cupola Furnace, continuous heating furnace, vertical cupola furnace

Darshan Weighing System is one of the leading manufacturer, supplier and exporter of pit type and electronic weighbridge in Ahmedabad, Gujarat, India. We are best in weighbridge due to our error free machine and quality service.    Suitable, where Space is a limitation, as ramps are not required.  Flush to ground level  Designed for rigorous and harsh environment and heavy vehicle usage.  Smooth movement of vehicles on platform.  Wide flanged beams and other structural members are accurately fabricated and built to excel quality engineering standards for durable and accurate performance.   1 Robust Load Cells and DigitizersThe most important components of an electronic weighbridge are the load cells and digitizers. DWS has made both of them very robust and hence, the best available in the country.   2 Highly Durable Girders and PlatesA truck to be weighed is directly driven to the platform of a weighbridge and hence, the platform is subjected to the entire load and vibrations created by a moving truck. Our weighbridge platforms (made of steel) are designed very carefully to withstand these loads without damage and is highly durable. The girders and plates used in our platform are selected very carefully and undergoes stringent quality checks.   3 Reliable Mounting Assembly for Load CellsThe next most important component is the mounting assembly for load cells. This transfers the load from the platform to the load cells. This is a cradle assembly which is free to move in the horizontal axes and hence takes all side loads generated due to the vehicular movements on the platform. The mounting assembly consists of three parts namely , the Bottom Plate, Rocker assembly and Top Bracket.   4 Low Resistance Cables and Weather Proof Junction BoxThe signal from the load cells (in milli-volt) is carried to the digitizer, in the control room, through a 4 - core shielded cable. The cable has a very low electrical resistance and hence, no loss of signals. The cables from different load cells , in a weighbridge, meets in a weather proof junction box. The junction Box is of fully molded type and houses the necessary terminal blocks for interconnection of load cell out puts. The Junction box also carries a set of surge arrestors, to protect the entire system from lightning and electrical surges.   5 Truck Position Sensor ( TPS )DWS has unleashed Truck Position Sensor (TPS) a unique system, to check the position of a truck on the platform.The Truck Position Sensor ensures that the truck is completely on the platform, and no part of the tyre is protruding outside. This totally eliminates the chances of manipulating the weight reading, by partially keeping the truck tyre, outside the weighing platform. If a portion of the tyre is outside the weighing platform, the system will refuse to display any reading.