Gas Powered Generator Dealers in Vatva, Ahmedabad

The compressed air is passed through a Twin Tower PSA module interconnected with automatic changeover valves. At the bottom of PSA towers, Activated Alumina is provided which has tendency of adsorbing moisture from compressed air. After passing through this bed of Activated Alumina air gets dried. Supply of dry compressed air from this layer of desiccant (activated alumina) will be continuous without any interruption. Dried compressed air will now come in contact with bed of carbon molecular sieves (CMS). Carbon Molecular Sieves are special grade of adsorbent which have the property of preferential adsorption of oxygen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure. The two towers of PSA modules are inter-connected with automatic changeover valves through pneumatic signal given by solenoid valve which in turn get the electrical signal from the timer provided in the control panel. The changeover time cycle will be 1 + 1 minute. The outgoing nitrogen gas is sent to a surge vessel where the minimum nitrogen pressure will be maintained with the help of Back pressure Regulator. The product nitrogen will now be sent to the consumer point through a pressure reducing valves at required pressure.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Hot air generator to Convey the Material.A fully automatic multi pass counter current Hot Air Generator consist of stainless steel shell type integral combustion chamber accommodated in multi M.S. shell. The cold air is inserted by a suitable capacity blower fan in first pass, absorbs heat from flue gas passage and accordingly both hot flue gas and cold air travel in opposite direction in the passage which ultimately transfers 90% heat to cold air and delivers hot air from hot air outlet hole. The system functions fully automatic on temperature sensing device installed at hot air outlet which ON-OFF the burner at pre-set temperature. the system is a package type unit, fixed on common base frame.

Our product offerings include generators and hot air generator. We follow a stringent quality control norm throughout the process of production and every individual product is verified by our quality controllers before the final dispatch to the clients.

• Condition: New
• Application: Industrial
• Brand: Thermotech
• Capacity: 1 lac kcal/hr to 10 lacs kcal/hr
• Surface: Galvanized
• Material: SS

 » Circulating Pump Motor Interlocked.  » Pressure Switch on Pressure Tank.  » Low Fuel Oil Temperature (F.O. Fired Only).  » Two Nos.Pressure Switch for On/Off Flow.  » High Stack Temperature.  » High Hot Water Temperature.  » Flame Monotoring by Photocell (LDR).  » Spring Loaded Safty Valve.     Key Attributes:    » Coil for Seamless ASTMA 106 GR-B Pipes.  » Independent Drive for Fuel Pump 1440 RPM.  » No Scale Formation.  » Easy and Economical Operation.  » Outside Preview of IBR.     Applications:    » Sugar Plant  » Textile Industries  » Thermal & Hydro Power Plant  » Mines/Mining Industries  » Coal Preparation Plants  » Chemicals Plants  » Pharmaceuticals  » Refinery  » Breweries and Distilleries  » Railways  » Shipping  » Tyre Industries  » Plastics  » Rolling Mill  » Metallurgy  » Agriculture  » Petroleum & Petrochemicals  » Laboratories  » Dairy Products  » Foundry  » Ceramic Industries  » Road Equipments and many more     Detail Required For Quotation:    » Capacity in Kcal/Hr.  » Temperature in Deg. C.  » Type Of Fuel in Light Diesel Oil / Furnace Oil / L.P.G. / Natural Gas

• Heat output: 1,00,000 Kcal
• Maximum hot air temprature: 250ºC
• Efficiency on gcv: 85%

A fully automatic multi pass counter current Hot Air Generator consist of stainless steel shell type integral combustion chamber accommodated in multi M.S. shell. The cold air is inserted by a suitable capacity blower fan in first pass, absorbs heat from flue gas passage and accordingly both hot flue gas and cold air travel in opposite direction in the passage which ultimately transfers 90% heat to cold air and delivers hot air from hot air outlet hole. The system functions fully automatic on temperature sensing device installed at hot air outlet which ON-OFF the burner at pre-set temperature. the system is a package type unit, fixed on common base frame.

• Capacity: 50,000 Kcal/Hr. to 60 Lacs Kcal/Hr.,
• Fuels: Gas / LDO / Diesel Fired

Gas Fired Hot Air Generator, Salt Bath Furnace, Hot Air Generator

Oil Gas Fired Hot Water Generator, Packaged Steam Boiler, Small Steam Boiler

Direct Fire Hot Air Gas Generator, Expansion Tank

Gas Fired Hot Air Generator, Steam Boiler, Chemical Tanks, Pressure Vessels