Granulator Machine Dealers in Vatva, Ahmedabad

Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.

APPLICATION : MIXING BOWL AND COVER: in three section • The mixing bowl is fabricated with S.S. 316. The bowl is specially design in three sections. The flat bottom, mid portion is cylindrical and the top portion is conical. This design helps the machine to move efficiently. The machine is provided with the counter balanced lid. The lid is provided with the vents, charging openings and view ports. THE MAIN IMPELLER AND DRIVE: The main impeller is consisting of dual speed 750/1500 synchronous dual HP TEFC motor, coupled through a belt drive to a worm reduction gearbox with chain coupling. The machine is consisting of specially designed bearing housing to drive the impellers. The impeller does the mixing at the bottom and at the centre of the bowl. The inside wash facility is been very helpful for quick change over. The bearing housing prevents the leakage of the powder from the bottom entry. This design leads to longer life of the gear box. CHOPPER: The dual HP dual speed (1440/2800 synchronous) TEFC MOTOR is given for the chopper. The motor shaft is made up of S.S. The chopper is consists of 4 blade S.S. impeller. The assembly mounted in the bowl horizontally in which the shaft is integral with the motor. DISCHARGE PORT: The discharge port has vertical downward opening and is mounted horizontally. The pneumatic cylinder is used to operate the opening. MOUNTING: At the bottom, the drive assembly is mounted by the channel frame. The sturdy channel frame is made of M.S. On the top, the bowl is mounted. The platform is provided by the S.S. staircase and railings. The S.S. dimpled plates cover the half of the platform. The area under the bowl is covered with S.S., for the easy and safe movement of the operator. The entire body of the machine is covered with the S.S. covers. CONTROL PANEL: The control panel is situated on the platform. The control panel is provided with for the slow, fast, on, off functions the actuator manual and auto controls timer. Ammeter/ voltmeter for the motors Pressure gauge and indicator light Air regulator and air filter The PLC based control panel can be provided if required. MAIN PANEL: The main panel consists of MCCB, and the wires are given the numbers for the easy operation. SPECIAL FEATURES: The shaft is covered by the air purged shaft seal. In built cleaning system for the shaft seals. To reduce the vibration and for the better transmission, the fanner taper lock pulley is given. The oil seals and sleeves are provided to main bearing housing to prevent the leakages and cross contamination. To prevent the entry of the powder into the impellers and jamming the pressure switch control is provided.   The chopper can not operate directly or independently due to the circuits, with interlock contactors. To regulate the discharge plunger the 3 position solenoid valves are given which helps to open and close at desired levels. The non return valve and water inlet/outlet connections are given with the pneumatic circuit for the washing of the main impeller assembly without dismantling. SAFETY FEATURES: Motor is provided with the locking system to eliminate the accidents. The moving parts are enclosed for the safety. PNEUMATIC SYSTEM:The pneumatic systems require the air pressure of 3 to 5 kgs/sq cm. To operate the discharge valve. The air filter pressure gauge 2 way solenoid valve. The pipes ferules and pneumatic fittings.

• Model: FALCON MM – 200
• Output: 50 to 200 Kgs./Hr.
• Rotor Assembly Diameter: 250 mm. Approx.
• Rotor Speed: 750 / 1500 / 2300 / 3000 RPM
• Screen dimension Inner Diameter: 265 mm./ Height 140 m
• Motor: 3 HP. / 1440 RPM / 3 Ph.
• Material charging height: 1460 + 5 mm.
• Material discharging height: 760 + 5 mm.

Falcon Machineries has developed a range of equipments which are used in the granulation process. These include the vibro sifter machine, multi mill machine, paste castle, the double cone blender machine, the high shear mixer granulator and the intermediate pharmacy container. All equipments have been manufactured with high quality material that guarantees durability and smooth operation. One distinguishing feature of these machines is the ease of maintenance and cleaning, which eliminates any contamination between different products as well as durability.

Sturdy and durable. Easy to operate clean maintain. Noise level minimum. Large output. Continuous oscillating stirrers drive. Simple screen holding and tensioning device. Screen – Available in different size durable cost effective.

• Hopper Size: 33 Liter
• Screen Area: 388 mm (W) X 762 mm (L)
• Stirrer Size: 138 mm x 368 mm Length

In compliance with cGMP guidelines., Important machine in the process of in granulation in tablet making as quality of tablet is determined by the desirable quality of the granules used for its compression., Can be used for dry aspect of the granulation process Quality & percentage of granules can be achieve better compared to other processing machineries like Multi Mill, Comminuting Mill etc, Special oscillatory rotor action ensures minimum fines, Contact parts are made of SS 316., Easy to operate clean maintain., Simple screen holding and tensioning device., Castors provided for mobility.

• Output: 1 Kg to 50 Kg / hour

The Laboratory Oscillating granulator is for wet and dry granulation widely used in research laboratories of pharmaceutical, food and chemical industries. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening

Tablet Coating Machine, Rotary Tablet Machine

• Screen area: 388 mm (W) x 762 mm (L)
• Output *: 30 to 90 Kgs./Hr.

If you are looking for high performance Pharmaceutical granulator machine than Ganesh technology is the right destination for all your quaries. We are supplier and exporter of all equipment related to solid dosage form department. Our line includes granulators, fluid bed dryers, powder mixing equipment, blenders, tumblers, Pharmaceutical siever machine and many more.

Cylindrical mid portion and conical top portion for efficient mixing operation & provided with counter balanced lid. Lid provided with vents, view ports & charging openings. The impeller is designed to provide mixing at the bottom and at the centre of the bowl and is driven through a specially designed bearing housing that facilities inside wash facility for quick change over and also prevents leakage of powder from bottom entry and leads to longer life of gear box. The discharge port is mounted horizontally into the bowl with vertical downward opening. The opening is operated by pneumatic cylinder and discharged can be regulated for required opening.

Proton Granulator Machine, Twin Screw Conveyor, Doctoring Rewinding Machines

Oscillating Granulator Machine, Rotary Tablet Press Machine

Oscillating Granulator Machine, Vibro Sifter, tablet coating machines

granulation machine, Sifting Machines, Comminuting Mill Machine