Grinding Mill Dealers in Kathwada, Ahmedabad

• Color: Blue And White
• Size: 2 hp to 20 hp
• Usage: Maize 🌽, Bajra, jawar

1. Pug Mill mixing unit so designed to mix material with exact quantity of water content to prepare a homogeneous mixture, also designed robust quality of wear resistant paddle arms for long life. It is fitted with AC motor. 2. Load-Out Conveyor with Hydraulic Gob Hopper & Power-Pack 3.Stationary 10,000 liter Capacity water Tank fitted with 3 HP water pump.

OPERATIONProduct fed into the operating area by means of specially designed feeding device is subjected to high shearing, cutting and rubbing forces between stator and rotor. Due to conical arrangement and the centrifugal effect of the rotor rotating at a high speed (2800 RPM), the material is forced in to the next tooth stage. The tooth vibrations which subject the particles with high degree of forces. Intence whirling multiples the grinding and mixing effect. Due to the slightly deviating tapeirng of the milling surface of the stator and rotor, the angular gap becomes narrower towards the discharge section. The processed material continuously leave the mill through the drain pipe, if required it can be re-circulated. SPECIAL FEATURES All contact parts are made out of SS304 / SS316 / SS316 L quality material. Coupling provided between motor shaft and rotor for the ease in maintenance. Special sealing arrangement between the motor and the processing chamber to prevent liquid going in side the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor & stator gives better performance in size reduction without damaging the product. 3 way cock system for draining and re-circulation of liquids & discharge spout for viscous products provided as a standard. DOL starter with overload relay for protection against single phasing and low voltage. Contact parts can be easily dismantled for cleaning. Flame proof construction provided on demand.( On extra cost )

The colloid mill is suitable for cutting down the particle size of a solid or liquid suspended in a liquid. Equipped with hydraulic shear, the colloid mill machine is widely used for creating particles of same size, dispersing, mixing of materials. The colloidal machine has found its wide usage in industries including food & beverages, pharmaceutical, suspensions & emulsion, cosmetics and more. The colloid mill machinery involves stator and rotor in the cylindrical vessels to do shearing for reducing the material size. Working Principle: The material to be reduced enters the colloidal mill through its inlet hopper. It then passes through the gap created between the rotor and stator. The mill then cuts down the size of the material to the desired level. The process requires the inclusion of heavy liquid to start the shearing process. During the milling process, both the materials are stirred at a high rate while the processed material starts draining out of the outlet. If required, the process can be repeated through its re-circulating pipe assembly.   Salient Features: The machine works on cGMP model. The machine assembly is made of stainless steel. Compact and rugged structure. Equipped with jacketed stator housing with stainless steel connections. The motors are explosion proof. All the machine contact parts are composed of SS304 / SS316 / SS316 L quality material. Provided with DOL starter with overload relay to protect against single phase line and low voltage.

A ball mill is primarily a cylindrical device used for grinding or mixing different material such as chemicals, raw material, ores and paints. It rotates around a horizontal axis that is partly filled with the material to be ground along with the medium of grinding. The ball Mill operates by rotating a cylinder with grinding balls like steel. These Ball Mill shells produce excellent grinding of slag and cement. This product is very easy to operate and gives reliable performance and having a large capacity to do the work perfectly. We export and supply Ball Mills in wide range to clients in reasonable price

Solide carbide ballmill 55hrc swiss-star make high proformance long life ready stock 1.00mm to 16.0mm 38mm to 200mm long.

• Driven Type: Electric
• Condition: New
• Automatic Grade: Semi Automatic
• Voltage: 220 V
• Warranty: 1 Year

• As per Order.: As per Order.

Driven by technical excellence, we are counted as the topmost manufacture, exporter and supplier of excellent quality range of CornMaize 3rd Stage Fine Grinder (Wet Process) that is used for grinding CornMaize and other grains with utmost uniformity. Proposed grinder is designed and manufactured in line with international standards using quality-approved basic materials and latest methodology. Further, the offered grinder is tested on defined quality parameters to ensure its optimum functionality. Clients can avail this CornMaize 3rd Stage Fine Grinder (Wet Process) in several sizes, designs and other specifications at industry leading price. Features: Capacity: Upto 300 TPD. Material Used: Mild Steel or Stainless Steel.

• Weight: 500 LTR
• Color: Silver
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Country of Origin: India
• Warrenty: 1 Year
• Brand Name: Bhakti
• Material: Stainless Steel
• Feature: Good Quality
• Pressure: High

• Voltage: 220-380V
• Phase: 3 Phase
• Material: MS
• Frequency: 50-60 Hz
• Automation Grade: Automatic
• Power Source: Electric
• Motor Power: 2 HP
• Surface Finish: Color Coated
• Capacity: 230 Ltr
• Brand: SE

We manufacture and export a wide range of cage mill. These high quality equipment, manufactured using high quality raw materials, are assured of greater longevity and immaculate performance. These are used to bring uniformity in the particles.

Ball mills are used primary for single stage fine grinding, regrinding, and as the second stage in two stage grinding circuits. According to the need of customers, ball mill can be either wet or dry designs. Ball mills have been designed in standard sizes of the final products between 0.074 mm and 0.4 mm in diameter.

• Voltage: 380 V
• Dimension(L*W*H): 1000*600*900mm
• Spindle Speed(r/min):: 1440
• Weight:: 330 kg
• Motor:: 7.5 HP

Our organization is one of the trusted Manufacturers and Suppliers of industrial Ball Mills that comply with international standards. In the range of our Ball Mills, we also offer shrouded Ball Mills that are extensively used for dispersion of enamels & primers, powder distempers and cement paints. Industrial Ball Mills made available by us are fabricated using quality-approved mild steel & stainless steel, and are used to grind materials into extremely fine powder.

• Frequency: 50 Hz
• Voltage: 220-440 V
• Material: Mild Steel
• Power Source: Electric

We are the supplier of this products.

• Type: Granulator
• Application: Granules
• Brand Name: Adinath
• After-Sales Service Provided: Engineers available to service machinery overseas
• Model Number: ABM
• Packaging Details: Product & Transport Worthy Wooden Packing

A ball mill, a type of grinder machine, is a cylindrical device used in grinding (or mixing) materials like ores, chemicals, ceramic raw materials and paints. Ball mills rotate around a horizontal axis, grinding is taking place with the heavy balls filled with material to be ground in the ball mill. There are two types of Ball Mills we Manufacture;1. Continuous Type: This type of ball mill provides continuous production in terms of kgs or tons per hour basis. At one end material is fed at controlled feeding rate while at the exit end material is sucked by air attaching pneumatic system or comes out by flotation. It is often provided in complete closed circuit where under sized material is thrown back to feeding end after classifying the particle size through efficient dynamic type classifier.2. Batch Type: Material is being charged into ball mill once and the lid of the mill get closed. The mill is being rotated at certain speed and time as long as desired particle size achieved. Once the material is ground, the lid gets opened and the material is being discharged manually or gravitationally. Ball Mill Shell with suitable liners such as High Alumina, Hyper steel, High Manganese, ceramic liners etc. Grinding medium, balls, of various sizes in diameter made of High Alumina, High Manganese, natural pebbles, hyper steel etc. Continuous Ball Mill System includes blower, dust collector, cyclone, classifier, and necessary duct line. Feeding arrangement with hopers.

• After-Sales Service Provided: Engineers available to service machinery overseas
• Application: Granules
• Brand Name: Adinath
• Model Number: ABM
• Place of Origin: Gujarat, India
• Packaging Details: Product & Transport Worthy Wooden Packing

Ball mills are used primary for single stage fine grinding, regrinding, and as the second stage in two stage grinding circuits. According to the need of customers, ball mill can be either wet or dry designs. Ball mills have been designed in standard sizes of the final products between 0.074 mm and 0.4 mm in diameter. Features Of Ball Mill Suitable for grinding material with high hardness The shape of the final products is circular No pollution for the powder with ceramic ball Stable performance Easy installation The capacity and fineness can be adjusted by adjusting the diameter of the ball.   Application Of Ball Mill The ball mill is key equipment in grinding industry, especially in mineral ore dressing plants. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc.    

• Model: BMCM - 15
• Output: 150 to 1500 Liters. 5 to
• Particle size reduction: 15 Microns
• Hopper capacity: 15 Liters
• Main Electrical Motor: 3 HP / 2850 RPM / 3 Ph.

*Depending upon material characteristics viscosity, density & micron size. R&D Model Available on Customer Demand. Totally leak proof design. Unique for small volume micronization. Modified design of stator-rotor assembly. Available in plain, water jacketed & flame proof options. Easy to dismantle for cleaning and maintenance

• Item: Ball Mill
• MOC: IS2062
• Capacity: 3KL
• Size: 1650mm ID X 1500mm Long X 25mm Thick

A prominent supplier of huge range of Ball Mill.

The Hammer Crusher/Disintegrator is widely used in the industry of mining, building materials, chemical industry, metallurgies and fodder. The Hammer Crusher/Disintegrator can secondary and fine crush materials in middle or less than middle hardness such as barite, limestone, terrazzo, silica and stone, coal, coke, gypsum, aluminum sulfate, slag, etc. Features And Benefits Able to produce a wide range of particle sizes. work with any friable material and fiber. Ease of use. Lower initial investment. Minimal maintenance needed.

• Features: Aesthetical exterior appearance,Unique and self contained design,Mild steel structure, which is powder coated in attractive shades,Safe, Quiet & smooth operation
• Built in timer: 0 – 100 Minutes
• Rpm: 20- 400 RPM to achieve variable speeds
• RPM Display: Digital RPM Display
• Jar capacity: 300 CC
• No. of Jars: 02 Nos
• Power supply: 230 Volts, 50 Hz, 1ph, AC Supply
• Power consumption: 1/3 Hp
• Weight: 130 Kg

Colloid Mill Machine is suitable for Homogenizing, Emulsifying, Dispersing, Mixing , Comminuting of liquids to highly viscous products. It is based on rotor and stator principle. It’s available in plain as well as water jacketed model which is suitable for heat sensitive product. In your case as required the machine will be of water jacketed type.

This type of ball mill is specially designed for getting batch by batch output. This machine is preferred for both wet & dry (either one at a time) milling. It is also applied for homogenous mixing of the materials. This machine offers high performance and can crush very hard materials consuming very less amount of time. Our clients prefer this machine as it is very robustly constructed utilizing the finest quality materials and the most advanced technology in compliance to the norms of the industry. They are also thoroughly quality tested to ensure their faultlessness and only when they are confirmed for their quality they are supplied to the customers. Our products have excellent features such as they are easy to install and operate, they are resistant to wear and tear as well as corrosion. The cleaning and maintenance of this machine is very easy and it consumes power reasonably and is suitable for grinding dyes and pigments, ceramics, quartz, clay, minerals etc. we are the ball mill supplier at very affordable rates. Batch type ball mill operates by taking in the material to be grinded via the inlet port into the rotary drum. Before the rotary drum begins to rotate the ports are closed. Then the material starts to mix and grind in the drum as it rotates. Once the process is complete the ball mill stops and the processed material is gathered via the outlet port.   Salient Features : Apt for both dry and wet grinding Massive processing volume Ideal for batch by batch output Power-efficient Easy to install and operate Resistant to wear and tear & corrosion Lucrative Incredibly durable