Grinding Mill Dealers in Sg Highway, Ahmedabad

The Hammer Crusher/Disintegrator is widely used in the industry of mining, building materials, chemical industry, metallurgies and fodder. The Hammer Crusher/Disintegrator can secondary and fine crush materials in middle or less than middle hardness such as barite, limestone, terrazzo, silica and stone, coal, coke, gypsum, aluminum sulfate, slag, etc. Features And Benefits Able to produce a wide range of particle sizes. work with any friable material and fiber. Ease of use. Lower initial investment. Minimal maintenance needed.

It is called so because the barrel of this machine is octagonal in shape designed so for enhanced efficiency and functionality. This machine is very useful for very hard material that such as quartz. Our octagonal type ball mill is widely demanded in the Industries across the world because they function very efficiently and offer an excellent output as well as are absolutely consistent and reliable. This is because they are designed and made by our expert professionals after far-reaching research as well as keeping in mind the norms of the industry. Their fabrication is done precisely following this design under the guidance of expert professionals. Our ball mill machines are made up of the finest grade of materials and components. We manufacture them with the aid of the latest technology and advanced machines and also thoroughly quality test the final finished product to ensure our clients receive only high performance machines that are totally flawless. They are mainly used by diverse industries to grind and mix chemicals, ores, alloys, minerals and graphite and cement etc. Our products are immensely demanded in the cities of India such as Warangal, Thane, Patna, Nellore and North Dumdum etc.   Salient Features : Enhanced efficiency High functionality Lucrative High Durability Very consistent Light in weight Low power consumption Compact Affordable

• As per Order.: As per Order.

Driven by technical excellence, we are counted as the topmost manufacture, exporter and supplier of excellent quality range of CornMaize 1st & 2nd Stage Coarse Grinder (Wet Process) that is used for grinding Corn Maize and other grains with utmost uniformity. Proposed grinder is designed and manufactured in line with international standards using quality-approved basic materials and latest methodology. Further, the offered grinder is tested on defined quality parameters to ensure its optimum functionality. Clients can avail this CornMaize 1st & 2nd Stage Coarse Grinder (Wet Process) in several sizes, designs and other specifications at industry leading price. Features: Capacity - Upto 300 TPD. Material used: Mild Steel or Stainless Steel.

• Main Motor Power (HP): 10
• Max Air Pressure of Pump(Mpa): 0.7MPa

Horizontal sand mill is suitable for all kind of products from low to high viscous pump able products for fine grinding with media. The bead mill sand mills are widely used in pint, ink, chemicals, Agro chemical and coating industries for size reduction and dispersing of pigments in liquid, Particle size reduction up to 2.

• Material: Metal
• Thickness: 5-10mm
• Application: Mining
• Color: Silver
• Feature: Durable
• Finishing: Polished

• size: 5 to 10 Microns
• Motor: 3 HP / 2850 RPM / 3 Phase

All contact parts are made out of SS 316. No casting is used for avoiding contamination problems.Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.

We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items. Due to our commitment towards providing quality approved products to the clients, we source the raw materials only from the well-known and trusted vendors of the market. GMP Model Suitable for Homogenizing, Emulsifying Dispensing, Mixing, Commuting of liquids to highly viscous products Jacketed (Optional) It is based on rotor-stator principle Particle size reduction 5 to 10 micron Output-120 to 12000 Kg./shift 3.0 HP 440 volts Motor

We offer customers automatic suction hammer mill that comes in capacity ranging from 6 H.P. To 85 H.P. Available under the brand name 'Techno Wings' these automatic machines maintain due to continuity flow through automatic suction through motor. Further, the ampere of motor does not fluctuate, hence increasing the working capacity of machine. The basic principle is straight forward. A hammer mill is essentially a steel drum containing a horizontal rotating shaft or drum on which hammers / blade are mounted. The hammers are free to swing on the ends of the cross, or fixed to the central rotor. The rotor is spun at a high speed inside the drum while material is fed into a feed hopper. The material is impacted by the hammer bars / blade and is thereby shredded and expelled through screens in the drum of a selected size. Key features of auto suction hammer mill Less operating cost due to automatic feeding. The size of cyclone body tank is bigger in these hammer mills. Automatic operations less production cost Easy to work & collect ground material without air pressure, due to dust collector. Through rotary suction machine red chili, cumin, coriander, husk of ground nut, rice bran, seeds of aratictrec (batool) soya bean are automatically sucked. Due to availability of beater carbides in automatic machines, it is not necessary to change beater frequently, which also ensures that production is not effected. Separate motor for hammer mill, blower, and rotary feeder, thus ampere of motors does not fluctuate, hence increasing the working capacity of machine. Operating principle of auto suction hammer mill The materials to be ground into the crushing chamber of auto suction hammer mill from feed hopper by gravity or through an automatic rotary feeder the carbides blades inside the crushing chamber accelerate the material to a very high speed to the toothed liner placed at the upper half of the crushing chamber. Shearing pulverises the material. The ground materials are continuously sucked by a centrifugal blower through screens placed at the bottom periphery of the crushing chamber and conveyed through a pipe into the cyclone dust collector for bagging. Excess air filtered through an air classifier. Particle size varied using screens with different size holes. Standard accessories of auto suction hammer mill 3 numbers motor pulley. 2 number cotton balloon. Anti-vibrating foundation stand with adjustable rail for motor. A set of perforated round holes screen are supplied with the machine. Extra accessories of auto suction hammer mill Suitable totally enclosed fan cooled three phases or single phase sq. Cage motor as per is: 325 or 996. {electricity (special power can be accommodated): 220/380/415 volts, 50/60 Hz, 3 phase} Suitable miniature circuit breaker as per is: 8828 with 3 meter cable & 3 pin top as per is: 1293 for single phase electric motors. Starters, main switch, ampere meter, capacitor for single phase electric motor. Foundation bolts V belts Magnetic hopper All contacting parts stainless steel 304 / 316 van be accommodated Application of auto suction hammer mill Hammer mills are exclusively meant for the grinding of turmeric, red chili, cumin, coriander, mango powder, sugar, wheat for ladu, salt, coffee, ayurvedic / homeopathic medicines herbs, roots, leaves, bark, dry fish, cattle and poultry feeds, food colors and so on so forth at large scale basis. Construction of auto suction hammer mill Rotary feeder is supplied with gear box. Hammer mill made from heavy duty mild steel fabricated body. Grinding chamber lined with serrated wear plates, which protects the body from wear and tear. Grinding is done by a set of swinging blades or hammers on a balanced rotor. A screen classifier forms the lower half of the grinding chamber. Blower is driven on a separate shaft with the help of a 'v' belts & separate motor.

• Type: Granulator
• Brand Name: Adinath
• Model Number: ABM
• Supply Ability: 5 Unit/Units per Month
• Place of Origin: Gujarat, India
• Port: Mumbai

• MODEL: BHagwati - 50
• Output: 50 Liter/Hour
• Rotor Speed: 2850 RPM
• Hopper Capacity: 5 Liters
• Partial Size Reduction: 5 to 10 microns
• Electric Motor: 1 HP / 0.75 kW
• Overall Dimension (Cm): 55 (L) X 83 (W) X 100 H

APPLICATION & PROCESS : The Laboratory scale colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. NEW DESIGN FEATURES : Laboratory scale colloid mill is used for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of Ointment, Liquid and highly viscous products research and development institutions, pharmaceutical laboratory, and pharmacy colleges. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Easy to Moveable and dismantle all contact parts for cleaning. Silicon food grade seal. Separate discharge spout for highly viscous products. Optional: Horizontal or vertical drive model, water cooling systems, Explosion proof electrical.

• Material: Stainless Steel
• Frequency: 50 Hz, 60 Hz
• Power: 0-25 Hp
• Driven Type: Electric
• Phase: Double Phase
• Orientation: Horizontal

MTM Medium Speed Trapezium grinder is a kind of leading-world-level industrial milling machinery. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Now a number of customers are fond of it for its incomparable features. Features Of MTM Trapezium Grinder Technical improvement based on environmental protection concept.. High efficient and energy saving centrifugal draft fan. High density and precision impeller device. Quick adjustment and maintenance Application Of MTM Trapezium Grinder MTM series grinding mill is widely used in electric power industry, metallurgy industry, chemical industry, building construction, coal industry, fireproofing materials making industry and some others. Materials as kaolin, gypsum, limestone and fly ash are easy ground by the machine.

2 In 1 Out HDMI Splitter, HDMI Lane Extender 30 / 60 Meter

Pug Mill, Ball Mill, Chemical Machinery, Filter Press, Filtration Equipment

ceramic machinery colloid mill, cast iron piston, Cylinder, PULVERIZER

Ball Mills, Cat Series, Corn Mills, cutting tool accessories

Colloid Mill, pharmaceutical machines, filling, Polishing Machine

Hammer Mill, mining exploration, drill machinery