Gyro Screen Machine Dealers in Rakhial, Ahmedabad

The material to be screened is fed on to the center of top screen. The undersize material passes rapidly though the screen during its travel to the periphery. The oversize material is continuously discharged through a tangential outlet. Vibro sifters are equipped to handle multiple screens one on top of the other with feed trays in between to give several precise sized fractions in a single screening operation. Special designs with up to seven screens are also available for grading.The top weight on the motor shaft rotates in a plane close to the center of mass of the assembly. Rotation of the top eccentric weights creates vibration in the horizontal plane which causes the material to move across the screen cloth to the periphery. Increasing the top eccentric mass increases the horizontal throw causing oversize material to discharge at a faster rate.The bottom eccentric weights rotate below the center of the vibrating mass creating tilt on the screens giving vibration in vertical and tangential planes. Increasing the vertical component of motion promotes turnover of material on the screen surface helping maximum quantity of undersize material to pass through the screen. The effective vertical motion helps in minimizing blinding of screen. The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weights. Variation in lead angle controls the spiral pattern of material travel over the screen cloth. Speed and flow pattern of material travel over the screen cloth can be set by the operator for maximum through-put and screening efficiency. Typical material travel patterns generated at various lead angles are shown below.  

Gyratory motion is the most effective method for screening. It causes 100% rotary motion and causes dispersion stirring & stratification of material to be sifted. Feed material constantly flows in Horizontal motion along a loop pattern on Vibro screen surface. AAVISHKAR Vibro screen provides optimum screening & assures maximum feed-rate & efficiency. Vibro screen are driven by a special type of vertically mounted motor having eccentric at the upper & lower end of the shaft. Rotation of out of balance top weight causes vibration in Horizontal plane whereas the rotation of lower weight causes tilt & vibrations in vertical plane. The heart of the Vibro screen is its special heavy duty, Robust Motor, having out of balance weight at top & bottom. By changing their lead angle, various spiral-creening patterns are obtained to suit different application.

• Dia inMM/in: 6760(30

Our Vibro Screen (Gyro Screen) are one of the most all-around, trustworthy and cost-effective with permanent process equipment in order to carry out various size-based divisions like, screening, sifting, classification, grading, oversize or undersize removal, de-dusting, de-watering, de-lumping, fiber recovery, filtration, pre-filtration and scalping. Gyro Screens are also known as Vibratory or Gyratory Sieving Machine which is been specifically designed on the conviction of gyratory motion generated by vibro motor. The machine carry out in the least size-based division with the frequent use of wire mesh or punch a hole in sheet and can also work for various application of solid to solid separation or solid-liquid separation or slurry separation. The other name of Vibro screen is known as Gyro Screen, Vibro Screening Machine, Screener, Vibrator, Sifter, Grader, Classifier, Separator as well as Sorter or Filter which are available as per the requirement of customers. Gyratory or Vibratory motion is the most effective method for transmission and screening. It results into 100% rotary motion and also causes diffusion stirring & stratification of material to be put through a sieve. Material of Gyro Screen constantly flows in Horizontal motion by the side of a loop pattern on Vibro screen surface. Gayatri Vibro Screen or Gyro Screen provides optimum screening and give assurance of maximum feed-rate & good organization. At Gayatri, The Gyro Screens/Vibro Screens works on the principle of the gyratory motion, as a result it is called Gyro Screen. It is also called circular vibrating screen. Vibratory or Gyratory motion is the well-organized method for screening. All our Gyro (Vibro) screen are determined by out of the ordinary type of vertically mounted with vibrating electric motor, having an eccentric at the upper & lower end of the shaft.

Gyro Screen, Vibrating Screen Cloth, Gyratory Screen