Hand Pumps Dealers in Ahmedabad

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design Features The test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to Operate The following instruction will help in smooth operation of the pump. Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping. Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constant pressure cannot be maintained. Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped. If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary. Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation. While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.

We are offering specifications: application data – for vlom -65 minimum bore size 125 mm. Internal dia. Of cylinder 65.35 mm stroke length 125±4 mm average discharge per stroke 12 to 15 liters per minute of 40 strokes operating depth (approx.) up to 30 meters application data – for vlom -50 minimum bore size 100 mm internal dia. Of cylinder 51.8 mm stroke length 125±4 mm average discharge per stroke 9 to 10 liters per minute of 40 strokes operating depth (approx.) up to 50 meters

• Application: Boilers, Pressure Vessels, C.I. Mains, Casting parts, Gas Cylinder, Pipes & Tubes Parts, Subject to Hydro Test Pressure
• FEATURES: Provides self base for testing, Pump done not required any foundation etc.

We are manufacturing Industrial Pumps and pumping equipment. Our products and services range from entry level Centrifugal pumps to the most state-of-the-art technology in the pumping industry.

• Type: Power Packs
• Application: Industrial Use
• Warranty: 1yr

Hand Pumps: upto 700 Bar Power Packs: upto 450 Bar Double Speed Hand Pump Single Speed Hand Pump

• Type: DAIPHARAM
• Brand Name: TOSS
• Material: CASTING
• Application: FOR USE GAS TRANSFER
• Feature: LIGHT WEIGHT
• Power: 12V
• Structure: BODY
• Model Number: DC
• DC LPG PUMP: 4000

Meeting the demands of customers as a manufacturer, exporter and supplier, we are engaged in offering lpg transfer pump. Owing to features like dimensional accuracy, durability and easy installation, the offered pumps are extensively demanded in the market. A team of adept professionals with hard-earned experience manufacture the offered range using high grade raw material and the latest technology. Our esteemed clients can avail these pumps from us at market leading prices. features: � light weight � dimensional accuracy � anti corrosive reliable engineers are expertise in manufacturing of lpg transfer pump, design of pump is sturdy and parts are with long life, manufacturers & exporters lpg transfer pump, manually operated pump: detailed product description: this is the most economical and safe version of lpg pump. This pump is very compact and can be carried any where because this pump does not require any power. Any person can transfer lpg easily. specifications: maximum pressure 60 psi transfer rate 1.25 kg minute ( approx 10 stroke ) standard accessories inlet valve, inlet pipe , filter , outlet pipe, outlet valve suitable to fit in to car bike handle. Free spares with pump set of �o� rings, washer packing weight 6 kg packing dimensions l x h x w 7 x 13 x 10 inch

We Offer mini hand pressure pump. Category : industrial pump

• capacity: 9 , 12 or 22 liters

Manual Hydro Test Pumps are portable type and can be easily handled by one man. The pump unit mounted on fabricated M.S. Pail, which stores liquid for testing, as well as provide self base for testing. Manual Hydro Test Pumps are available with CI MS GM SS Body, MS Fabricated Pail having water filling capacity 9 , 12 or 22 liters , SS Piston , CI MS Handle SS Check Valve, Brass Pressure Release Cock , 4” Dial Pressure Gauge and 1.5 meters pressure Hose with end connections .

Sturdy, corrosion resistant, easy to use and highly efficient, our Hand Operated Barrel Pumps are widely demanded across the world. We are supported by a team of adroit professionals, which ensures the Pumps are made using the best quality steel, iron and other required basic material, in accordance with the laid industry norms & standards. Rely on us for nominal prices! From India, we are the reputed Manufacturer, Exporter and Supplier of Hand Operated Barrel Pumps.

• Material: Steel
• Discharge: 20 LPH
• Size: 25 mm
• Maximum Working Depth: 30 Feet
• Operating Depth: 7 m
• Brand: Pooja

  Technical Details  Size range: 20 l Flow range: 40 ml per stroke   Applications  Pumping of lubrication oil (gear oil)   Key Features  Self-contained and completely sealed Suitable for sites where utilities such as compressed air or electricity is unavailable Material of construction: pump casing - stainless steel

• Name: Motorized Hydraulic Test Pump

Motorized Hydraulic Test Pump We have gained recognition as an eminent enterprise, devotedly engaged in offering a broad range of Motorized Hydraulic Test Pump. Backed by a team of experts, this pump is manufactured using best grade components and latest technology at vendors' end. Our offered pump is precision-designed in order to meet the industry norms. Furthermore, it is availed in different technical specifications as per the varied requirements of our valuable clients.  

• Model Number: HBP-25
• Features: quick and easy corrosion.
• Material Grade: SS-316 / SS-304
• Max Flow Rate: 350ML PER ROTATION

Aluminum Die cast pump head with steel body, ¾" Pump inlet, Includes telescopic suction tube with filter, Suitable for 50-210 litre Drum, Used for transferring oil based fluids, heating oils, motor oils, heavy & light Oils, kerosene & diesel.

• Type: Hand Operated Grease Pump
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White
• Condition: New, Used
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven: Electric, Hydraulic, Mechanical, Pneumatic
• Application: Industrial

• Brand Name: Protector
• Code: 2395
• Type: Disinfectant Pump
• Material: Made from PVC
• Size: 1.5 Litres
• Color: Green
• Features: It is small handy spray pump having capacity of 1.5 litres. It can be used to spay and liquid fill up in the bottle including sanitizer.
• Application: Can be used with sanitizer or disinfectant in house, offices or small hospitals and dispensary

• Weight: 750 gms
• Features: Compact, Light Weight, Hand Operated,Very Low Leakage rate
• Brand: CARE
• Model Number/Name: PHP40
• Pump Type: pneumatic
• Pressure Range: Up to 35 Bar
• Vacuum Range: Up to 0.9 Bar
• Resolution Sensitivity: Up to 1 m Bar
• Flexible Nylon Hose: 1 Meter
• Test Connection Port: 1/4
• Indicator Connection Port: 3/8
• Instrument Dimension: 230 x 140 x 65 mm(H x W x D)