Hand Tool Dealers in Cg Road, Ahmedabad

Low weight and high productivity characterizes all Atlas Copco hammers. A variety of models, with D-handles and either kick-latch or cap-type tool retainers, are available. Features & benefits Noise-reduction Air cushioned piston Applications Light-duty chipping and scaling work Renovation and conversion work Demolition

Water Swivels Compact, Compact Plus 25K Universal Standard Duty, 40K Heavy Duty Underground High-Speed, Underground Compact Hoisting Plugs Standard & Heavy Duty Full Grip Wrenches For Inner tubes, Outer Tubes and Drill Rods Rigid Pipe Wrenches

• Handle Material: ERGONOMIC RUBBER GRIP HANDLE
• Color: ORANGE BLACK
• Country of Origin: Made in India
• Type Of Hammer: club hammers
• Brand: GROZ
• Model Name/Number: CHID/4/12
• Head Weight: 1.8 Kg (4 lbs)
• Usage/Application: Minor demolition work - Driving-in stakes & fence posts - Drilling in concrete
• Handle. Length: 300 MM
• I Deal In: New Only

fauji-140 is a manually controlled and fauji-140r is fully remote controlled, hydraulic and self-propelled drilling unit on a 4 wheel drive carrier. Typical applications for fauji-140 are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries, and other special drilling applications. Therefore fauji -140 is most often used by construction contractors, mines and quarries and the municipal sector. Due to its versatility fauji-140 is often included in the equipment fleet of rental houses as well.standard components rock drill : hydraulic chain feed : incl. One set of jaws rod rack : on the carrier boom : articulated carrier : rubber-tyred powerpack : diesel driven, hydraulic pumps and on-board compressor hydraulic system : open center control system : integrated, radio remote controlled dust collector : hydraulic working lights :  6 pcs hydraulic jacks 4 pcs eu-safety devices service light, alarm signal, alarm beacon selection of options spirit level angle indicator feed angle measuring system feed angle and depth measuring system feed angle measuring and aligning system kit for alternative steels, each biodegradable hydraulic oil central lubrication system lincoln chain tracks electric fuel filling pump hydraulic winch manual fuel filling pump exhaust gas purifier fuel powered heater for engine shut down of suction for water holes water flushing kit without water pump water pump for water flushing kit grinder steel wearing strips for chain feed special tools for hydraulic drifter first service kit for fauji-140 extra manuals technical specification weight (without options) 3150 kg width 1.85 m height 2.45 m total length 4.7 m

• Type: Bearing Fitting Tool Kit
• Country of Origin: India
• Brand Name: Antimu
• Weight: appx 6 kg
• Product name: Bearing Fitting Tool Kit
• Capacity: 10 mm to 55 mm before diameter bearings

Bearing fitting tool kit model am 100 mark iii features a vital tool kit for fast, safe & accurate mounting of bearings the sleeve impact surfaces and rings are made of super tough, light weight, impact resistant, ultra high molecular weight (uhmw-pe) polyethylene material. each sleeve can accommodate 200 mm (8") projecting shaft length. the mass including,case weighs about 6 kgs. Inclusive of a special mallet. the entire tool is packaged in a special carrying case. advantages extremely light kit makes it very portable and convenient to handle. allows one to mount 200 different sizes of bearings and other components. ensures ready availability of components for mounting the bearings when required. even distribution of mounting force ensures accurate alignment and damage free mounting. no chance of dust or dirt being injected in the bearing.

Capsulotomy Scissors We manufactured the best quality of Capsulotomy Scissors with Extra Thin Long Blades.

• Type: Cutter
• Material: Carbon Steel
• Application: Cutting Carpet, Leather, Linoleum
• Color: Available in Many Colors
• Variety: Double Edge, Single Edge
• Country of Origin: Paper Box, Paper Wrapper
• Feature: Eco Friendly, Sharp

Living up to our reputation, we present you Freemans Snap Off Cutters. Enhanced with industrial expertise, we are a reputable figure in the industry. Our vendor management process makes certain that we procure from the vendors who can deliver the proposed quality consistently. They are equipped with features such as rigid construction and optimum design. We make the product available at market leading rates.          Details : CL/CS  Snap off blade cutter Size30/40/50/60 cm Impact resistant plastic body. Easy to replace blade. Provided with pocket clip.  

we are offering Tool Bit. Miranda Tools authorised dealer

• Capacity: 150 kg
• Weight: Up to 55 kg
• Voltage: 220 V
• Impact Velocity: 3.4 m/Sec

• Color: Silver
• Material: Stainless Steel
• Weight: 120 gm
• Model Number: 2113
• Packaging Type: Packet
• Brand Name: E- Mold Techniques
• Warranty: 6 Months
• Usage/Application: Hospital

• Material: Stainless Steel
• Brand Name: DeWalt
• Weight: 300-500g
• Packaging Type: Box
• Set Containt: 1 Hammer, 1 Slotted Screwdriver, 1 Screwdriver, 1 Cutter, 1 Electric Tester

Ncqc - we are specialized in manufacturing, exporting and supplying of high quality range of torque wrenches in india.

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength. General Description & Specifications The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case. Optional Accessory Calibrating Anvil

• Size/Dimension: 146mm
• Usage: Personal, Industrial, Garage/Workshop

• Surface Finishing: Color Coated
• Material: Stainless Steel
• Usage/Application: Uncemented Cup Hip Joint
• Packaging Type: Packet
• Size: 1 inch
• Corrosion Resistant: Yes

• Type: Hand Files, Knife
• Material: Iron, Stainless Steel
• Shape: Flat, Half Round, Round, Square
• Length: 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Color: Black, Silver, White
• Feature: Easy To Carry, Easy To Use, Good Quality, Light Weight, Rough, Smooth
• Application: Industrial, Personal
• Packaging Type: Box

• Material: Stainless Steel, MS
• Application: Drainage Cleaning Systems
• Single Piece Length: 1 m
• Size/Diameter: 1/2 inch, 1 inch, 2 inch, 3 inch
• Plating: Chrome Plated
• Surface Treatment: Heat Treatment

The hook spanners are designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN 981 standard. Additionally, they are suitable for use with N, AN, KMK, KMFE and KMT as well as nuts manufactured according to the DIN 1804 standard. Contains hook spanners HN 4 up and including HN 16 from the SKF HN series 9 different spanner sizes for the most popular lock nut sizes Packed in a handy, high quality tool holding pouch for easy storage Easy selection of the right size spanner

• Material: Alloy Steel, Cast Iron, Stainless Steel
• Shape: Cylendrical
• Color: Metalic Silver, Shiny Silver, Silver
•  Finishing: Coated, Non Coated

• Material: Stainless Steel
• Categories: Cutting Instruments
• Material Grade: A
• Quantity Per Pack: 1
• Grade: SS 304
• Range: All Sizes

• Brand Name: Snap-On
• Material: Mild Steel
• Model: 47CF
• Packaging Type: Box
• Size: 6 Inch
• Finish: Polished

• Brand Name: Ingersoll rand
• Air Consumption: 397(l/Min)
• No Load Speed: 5500 RPM
• Net Weight: 8.8KG
• Warranty: 6 month
• Country of Origin: Made in India
• Model: 2850max
• Drive Size: 1'' inch
• Max Torque: 2850NM
• Air Pressure: 90psi
• Blows per minute: 770
• Length: 334MM
• Min. hose size: 19mm
• Working Torque Range: 2850NM
• Noise Level: 96.7db(A)
• Body Material: Aluminium
• Material: Aluminium, MS

We are a trusted name engaged in manufacturing and supplying of industrial shafts that are manufactured in accordance with set industrial standards thus finds application in various industries. We offer industrial shafts in different specifications to fulfill the requirements of the clients. salient features resistant to corrosion and abrasioneasy to maintaindurablehigh performance applications sugar industry : mill roller shafts, gear shafts, shredder shafts, cane cutter shafts, pinions, pinion shaftscement industry : mill support roller, crusher shafts, cane cutter shafts, pinions, pinion shafts paper mill industry : reel shaft for sheet cutter, rewinder shaft, cone pulley shaft,railways : all type of shafts, armature shaftsgear industry : shafts, pinions, pinion shaftsindustrial fans / cooling towers & pumps industry : id / fd shafts, pump shaftsship building industry : propeller shaftsmaterial handling industry : conveyor shaftssteam / hydro turbine : rotor shaftspulverizing industry : compressors shafts, ball mill shafts

Micro Curved : S-410151 Half Curved : S-410251

Pump Shaft is precise, CNC machined, ground to perfection. Its surface is mirror finished, hard which reduces friction and lasts long. New generation, wear resistance Stain Less Steel used. Very competitively priced and is popular amongst the Carpigiani users / distributors.Can be used on:(Always mention type of the shaft required)Carpigiani - Coldelite - Promag - Cattabriga

• Brand Name: Polytech

We offer best quality & heavy duty 19 mm capacity drilling machine which is widely used in all engineering industries as well as chemical, plastic, textile, automobile, fabrication etc. for different operations i.e. drilling, tapping, boring, counter boring, reaming, honing etc. we are leading and one of the oldest manufacturers of full range of drilling machines from 13 mm to 38 mm with various models and sizes located in ahmedabad (gujarat india). we supply drilling machines to all over india and abroad. all important parts of machine is made from the best quality material and best finish. all spares are readily available for replacement even after long span of usage.

• Material: Stainless Steel
• Drive Size: 1/4 Inch
• Brand Name: Snap-On
• Packaging Type: Box
• Grade: SS304

We are deals in hydraulic lift shaft, The system operates on the elevator valves, submersible motors and screw pumps are manufactured by specialized European companies