Hand Tool Dealers in Paldi, Ahmedabad

we are offering Tool Bit. Miranda Tools authorised dealer

• Material: Stainless Steel
• Color: Silver
• Weight: 100 gm
• Usage/Application: Hospital
• Brand: E- Mold Techniques
• Automation Grade: Manual
• Material Grade: SS304
• Packaging Type: Box
• Surface Finish: Polished
• Model Number: 2029

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength. General Description & Specifications The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case. Optional Accessory Calibrating Anvil

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. Vane dia, rod dia, vane size & vane height are as per IS specification.The Vane shaft is attached through the hollow upper shaft to resettable pointer, which indicates the angle of torgue on a dial graduated in degrees. The dial reading multiplied by spring factory gives the torque. A container for soil tube of 38mm I.D. & 150 mm long can also be used as container. Complete with set of springs, one each of approx 0.2kg/cm,4kg/cm,6 kg/cm,8 kg/cm in a nice teak wooden carrying case. Motorised Model Complete with set of springs, one each of approx 0.2kg/cm, 4kg/cm,6 kg/cm,8 kg/cm in a nice teak wooden carrying case. but with motorised, rate of rotation is 1/60 RPM. Relevant Standard : IS : 2720(Part-XXX) Make : EIE

• Type: Hand Files, Knife
• Material: Iron, Stainless Steel
• Shape: Flat, Half Round, Round, Square
• Length: 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Color: Black, Silver, White
• Feature: Easy To Carry, Easy To Use, Good Quality, Light Weight, Rough, Smooth
• Application: Industrial, Personal
• Packaging Type: Box

We are deals in hydraulic lift shaft, The system operates on the elevator valves, submersible motors and screw pumps are manufactured by specialized European companies

• Material: CI
• Application: Industrial
• Brand Name: Beacon, Kirloskar, Keerthi, Crompton
• Surface Finishing: Powder Coated
• Warranty: 12 Months

Pump Shaft is precise, CNC machined, ground to perfection. Its surface is mirror finished, hard which reduces friction and lasts long. New generation, wear resistance Stain Less Steel used. Very competitively priced and is popular amongst the Carpigiani users / distributors.Can be used on:(Always mention type of the shaft required)Carpigiani - Coldelite - Promag - Cattabriga

• Type: Electric
• Brand Name: HALL
• Sterilization: 155 Degree Celcius
• Power Output: Upto 90 W
• Speed: 0-630 rpm

• Capacity: 150 kg
• Weight: Up to 55 kg
• Voltage: 220 V
• Impact Velocity: 3.4 m/Sec

We are offering stainless steel apple cutter. apple cutter elegant designs

fauji-140 is a manually controlled and fauji-140r is fully remote controlled, hydraulic and self-propelled drilling unit on a 4 wheel drive carrier. Typical applications for fauji-140 are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries, and other special drilling applications. Therefore fauji -140 is most often used by construction contractors, mines and quarries and the municipal sector. Due to its versatility fauji-140 is often included in the equipment fleet of rental houses as well.standard components rock drill : hydraulic chain feed : incl. One set of jaws rod rack : on the carrier boom : articulated carrier : rubber-tyred powerpack : diesel driven, hydraulic pumps and on-board compressor hydraulic system : open center control system : integrated, radio remote controlled dust collector : hydraulic working lights :  6 pcs hydraulic jacks 4 pcs eu-safety devices service light, alarm signal, alarm beacon selection of options spirit level angle indicator feed angle measuring system feed angle and depth measuring system feed angle measuring and aligning system kit for alternative steels, each biodegradable hydraulic oil central lubrication system lincoln chain tracks electric fuel filling pump hydraulic winch manual fuel filling pump exhaust gas purifier fuel powered heater for engine shut down of suction for water holes water flushing kit without water pump water pump for water flushing kit grinder steel wearing strips for chain feed special tools for hydraulic drifter first service kit for fauji-140 extra manuals technical specification weight (without options) 3150 kg width 1.85 m height 2.45 m total length 4.7 m

Brass Brush Short Nylon Handle, mini marker, Stainless Steel Pharma Scoops

Features: Extremely short jaw opening and closing times Swivel range >360° Low load on carrier due to tandem cylinders (from CC 55 0) Replaceable blades Replaceable teeth (from CC 1700) Exchangeable jaws for universal and steel cutting applications (from CC 1700) Applications: Demolition Reduction Recycling    

• Material: Stainless Steel
• Brand Name: Austeofix
• Standard: SS304
• Finish: Chrome Finish
• Size: 225 mm

Pipe Notch Cutter, Conduit Bending Tester, hydrostatic pressure machine

• Material: Alloy Steel, Cast Iron, Stainless Steel
• Shape: Cylendrical
• Color: Metalic Silver, Shiny Silver, Silver
•  Finishing: Coated, Non Coated

• Overall Height: 24″

The black handled set is elegant enough to leave as decoration and durable enough for your Fire Surrounds. This traditional fireplace companion set compliments any open fire place or wood burning stove.Made from durable steel this fire set is finished in Matt black paint.